My Inquiry
My Account
Analog Devices Inc. AD9213BBPZ-10G
- Part No.:
- AD9213BBPZ-10G
- Manufacturer:
- Analog Devices Inc.
- Category:
- Analog to Digital Converters (ADC)
- Package:
- 192-LFBGA Exposed Pad
- Datasheet:
-
AD9213BBPZ-10G.pdf
- Description:
- IC ADC 12BIT PIPELINED 192BGA
- Quantity:
- Payment:
- Shipping:
Inventory:1,608
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AD9213BBPZ-10G from Analog Devices is a 12-bit, 10.25 GSPS RF analog-to-digital converter with 6.5 GHz input bandwidth, integrated digital downconverter (DDC), and 16-lane JESD204B interface supporting up to 16 Gbps line rate. It delivers −155 dBFS/Hz noise spectral density at 170 MHz input and 70 dBFS SFDR at 1000 MHz, targeting wideband radar and electronic warfare receivers.
For engineers reviewing the AD9213BBPZ-10G datasheet, AD9213BBPZ-10G pinout, AD9213BBPZ-10G application, or AD9213BBPZ-10G equivalent, this page provides verified specifications, multichip synchronization capability, DDC profile configuration, deterministic latency (367 clock cycles), and thermal design guidance for high-reliability RF sampling systems.
Technical Context
The AD9213BBPZ-10G employs an interleaved pipeline architecture with proprietary calibration and randomization to suppress spurious artifacts, enabling high dynamic range at 10.25 GSPS. Its on-chip DDC includes a 48-bit NCO and I/Q decimator with selectable factors of two or three, supporting fast frequency hopping across 16 profile settings.
Multichip synchronization achieves sample-accurate alignment using SYSREF and SYNCINB signals, while Subclass 1 JESD204B operation ensures deterministic latency. The device integrates negative voltage generators (AVNN1, BVNN1), overvoltage protection, and an on-chip temperature sensor for autonomous system monitoring.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Resolution | 12-bit - Enables high-fidelity digitization of wide instantaneous bandwidth signals without missing codes. |
| Max Sampling Rate | 10.25 GSPS - Supports direct RF sampling of L/S/C-band signals without analog downconversion. |
| Input Bandwidth | 6.5 GHz - Captures full Nyquist zone up to X-band frequencies with 1.4 Vp-p full-scale input into 50 Ω. |
| Noise Spectral Density | −155 dBFS/Hz at 170 MHz, −9 dBFS - Defines minimum detectable signal level in wideband spectrum analysis. |
| SFDR (excl. H2/H3) | 89 dBFS at 1000 MHz, −1 dBFS - Ensures clean capture of weak signals adjacent to strong interferers in EW applications. |
| JESD204B Lanes | 16 lanes, up to 16 Gbps - Reduces FPGA I/O count and simplifies PCB routing for high-throughput data streaming. |
| Power Dissipation | 4.44 W typical at 10.25 GSPS - Balances performance and thermal management in conduction-cooled RF modules. |
Pinout & Package
AD9213BBPZ-10G is housed in a thermally enhanced 12 mm × 12 mm, 192-ball BGA-ED package (BP-192-1) with exposed thermal pad. Pin layout supports symmetric power delivery, dedicated JESD204B ground planes (JGND), and isolated analog/digital supply domains.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VIN_P / VIN_N | Differential analog input | Accepts 1.4 Vp-p full-scale RF signal with 50 Ω termination; supports DC-coupled operation up to 6.5 GHz. |
| CLK_P / CLK_N | Differential clock input | LVPECL-compliant interface requiring 300–1800 mVp-p; enables precise aperture timing control for low jitter sampling. |
| SYSREF_P / SYSREF_N | JESD204B subclass 1 reference | Provides deterministic multi-device synchronization; setup/hold times defined relative to sampling clock edge. |
| SERDOUT_P[x] / SERDOUT_N[x] | JESD204B lane outputs | 16 differential pairs delivering serialized ADC data at up to 16 Gbps; terminated internally to 100–120 Ω. |
| AVDD / DVDD / JVDD | Supply domains | Isolated 1.0 V analog, digital, and JESD supplies minimize cross-domain noise coupling in high-speed conversion. |
Key Features
| Feature | Design Value |
|---|---|
| Integrated DDC with NCO | 48-bit numerically controlled oscillator and decimation filters reduce output data rate and JESD204B lane count for narrowband applications. |
| Multichip Synchronization | Sample-accurate alignment across multiple AD9213BBPZ-10G devices via SYSREF and SYNCINB, critical for phased-array radar beamforming. |
| On-Chip Negative Voltage Generators | Generates AVNN1 (−1.0 V) and BVNN1 (−1.0 V) internally, eliminating external charge pumps and reducing BOM count. |
| Fast Overrange Detection | Dedicated FD output asserts within 170 clock cycles to trigger AGC loops, preventing saturation in dynamic RF environments. |
| Low CER | <1 × 10−16 - Ensures ultra-reliable data integrity for mission-critical defense and aerospace telemetry links. |
Applications
| Radar Signal Acquisition | Electronic Warfare Receiver |
|---|---|
Use Scenario: Direct sampling of pulsed X-band radar returns with microsecond-level pulse repetition intervals. IC Role / Device Role / Timing Role: High-speed ADC capturing full instantaneous bandwidth for real-time Doppler and range processing. Use Value: 10.25 GSPS sampling eliminates front-end mixing stages, reducing system size, weight, and phase noise degradation. |
Use Scenario: Wideband surveillance receiver scanning 2–6 GHz spectrum for threat signal detection and classification. IC Role / Device Role / Timing Role: RF digitizer feeding FPGA-based FFT and demodulation pipelines with deterministic latency. Use Value: 16 DDC profiles enable rapid frequency hopping across surveillance bands while maintaining JESD204B lane efficiency. |
| 5G NR Massive MIMO Test Equipment | High-Frequency Oscilloscope Front-End |
Use Scenario: Baseband validation of 28 GHz/39 GHz mmWave transceivers using over-the-air channel emulation. IC Role / Device Role / Timing Role: Digitizer capturing wide instantaneous bandwidth waveforms for EVM and ACLR analysis. Use Value: −155 dBFS/Hz NSD enables accurate measurement of low-level adjacent-channel leakage in high-order QAM signals. |
Use Scenario: Real-time oscilloscope architecture requiring >5 GHz analog bandwidth and sub-picosecond timing resolution. IC Role / Device Role / Timing Role: Core sampling engine delivering 10.25 GSPS with 50 fs RMS aperture jitter. Use Value: Integrated 6.5 GHz buffer and on-chip calibration maintain ENOB >8.9 bits at 170 MHz, ensuring waveform fidelity. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar RF analog-to-digital converter applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AD9208BBCZ-3000 | 8-bit, 3 GSPS; lower resolution and speed; no integrated DDC NCO synchronization | Suitable for lower-bandwidth communications test where cost and power are prioritized over dynamic range | Select AD9213BBPZ-10G when ≥12-bit resolution, ≥10 GSPS, and multichip DDC sync are required. |
| ADC12DJ3200IRSBT | Texas Instruments part; dual-channel 12-bit, 3.2 GSPS per channel; JESD204C support; higher power (6.5 W) | Better suited for dual-path coherent sampling but lacks 10+ GSPS single-channel capability | Choose AD9213BBPZ-10G for single-channel ultra-wideband RF sampling with deterministic latency and lower power. |
Compared with AD9208BBCZ-3000 and ADC12DJ3200IRSBT, the AD9213BBPZ-10G uniquely combines 12-bit resolution, 10.25 GSPS sampling, integrated DDC with 16-profile NCO, and sample-accurate multichip sync-enabling compact, high-performance RF digitizers without sacrificing dynamic range or timing precision.
Availability
AD9213BBPZ-10G is available at Aetrix Electronics and suitable for radar signal acquisition, electronic warfare receivers, 5G NR test equipment, and high-frequency oscilloscope front-ends requiring stable component supply across extended temperature ranges (−20°C to +115°C).
Supply support for AD9213BBPZ-10G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, headquartered in Norwood, MA.
The AD9213 product line targets next-generation RF sampling systems demanding ultra-wide instantaneous bandwidth, low CER, and deterministic multichip timing-designed specifically for defense, aerospace, and advanced communications infrastructure.
FAQ
What is the maximum sampling rate supported by the AD9213BBPZ-10G?
The AD9213BBPZ-10G supports a maximum sampling rate of 10.25 GSPS, as confirmed in Table 4 of the Rev. A datasheet. This rate is validated across the full operating junction temperature range (−20°C to +115°C) and enables direct RF sampling of signals up to 6.5 GHz bandwidth. The AD9213BBPZ-10G maintains specified AC performance-including SNR, SFDR, and NSD-at this maximum rate under typical conditions.
Does the AD9213BBPZ-10G include an integrated digital downconverter (DDC)?
Yes, the AD9213BBPZ-10G integrates a full-featured DDC with a 48-bit numerically controlled oscillator (NCO), complex-to-real conversion, and programmable decimation filters. It supports decimation factors that are integer multiples of two or three, and stores up to 16 independent NCO profiles for rapid frequency hopping-functionality explicitly documented in the "Digital Downconverter (DDC)" section of the AD9213 datasheet.
What package type and thermal characteristics does the AD9213BBPZ-10G use?
The AD9213BBPZ-10G uses a 192-ball, 12 mm × 12 mm BGA-ED package (BP-192-1) with exposed thermal pad. Per Table 7, its thermal resistance is θJA = 20.5°C/W (natural convection), θJC = 1.6°C/W, and θJB = 9.2°C/W. These values are simulated per JEDEC JESD51-12 and require appropriate PCB copper area and thermal vias for reliable operation at 4.44 W typical power dissipation.
How does multichip synchronization work on the AD9213BBPZ-10G?
The AD9213BBPZ-10G supports sample-accurate multichip synchronization via SYSREF and SYNCINB signals in JESD204B Subclass 1 mode. SYSREF aligns the local multi-frame clock (LMFC), while SYNCINB initiates link initialization handshake. The device also synchronizes its internal DDC NCOs across chips-confirmed in the "Multichip Synchronization (MCS)" section and functional block diagram of the AD9213 datasheet.
What is the noise spectral density (NSD) of the AD9213BBPZ-10G at 170 MHz input?
The AD9213BBPZ-10G achieves −155.1 dBFS/Hz noise spectral density at 170 MHz input with −9 dBFS amplitude, as specified in Table 2 (AC Specifications) of the Rev. A datasheet. This value is measured at TJ = 70°C and reflects the device's ability to resolve low-level signals in wideband spectrum analysis applications such as electronic warfare and radar.
AD9213BBPZ-10G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Package/Case:
- 192-LFBGA Exposed Pad
- Packaging:
- Tray
- Product Status:
- Active
- Number of Bits:
- 12
- Sampling Rate (Per Second):
- 10.25G
- Number of Inputs:
- 1
- Input Type:
- Single Ended
- Data Interface:
- JESD204B
- Configuration:
- ADC
- Ratio - S/H:ADC:
- -
- Number of A/D Converters:
- 1
- Architecture:
- Pipelined
- Reference Type:
- Internal
- Voltage - Supply, Analog:
- 0.975V ~ 1.025V
- Voltage - Supply, Digital:
- 0.975V ~ 1.025V
- Features:
- Simultaneous Sampling
- Operating Temperature:
- -20°C ~ 115°C
- Supplier Device Package:
- 192-BGA-ED (12x12)
- Mounting Type:
- Surface Mount
- Grade:
- -
- Qualification:
- -
AD9213BBPZ-10G FAQ
1.How can I place an order for AD9213BBPZ-10G through Aetrix?
Please submit a Request for Quotation (RFQ) for AD9213BBPZ-10G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AD9213BBPZ-10G reliable?
The price and inventory of AD9213BBPZ-10G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AD9213BBPZ-10G is usually 5 days.
3.What payment methods are accepted for AD9213BBPZ-10G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AD9213BBPZ-10G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AD9213BBPZ-10G?
AD9213BBPZ-10G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AD9213BBPZ-10G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AD9213BBPZ-10G?
For technical support, including AD9213BBPZ-10G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AD9213BBPZ-10G requirements.
6.How does Aetrix verify that AD9213BBPZ-10G is sourced from the original manufacturer or authorized distributors?
All AD9213BBPZ-10G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AD9213BBPZ-10G meets industry standards.
7.What is the process for return or replacement of AD9213BBPZ-10G?
All AD9213BBPZ-10G units undergo pre-shipment inspection (PSI). If there is an issue with AD9213BBPZ-10G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AD9213BBPZ-10G part is unused and in its original packaging.
Return procedure for AD9213BBPZ-10G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AD9213BBPZ-10G Tags
-
ADC081C021CIMKX/NOPB
Texas Instruments
-
MCP3021A5T-E/OT
Microchip Technology
-
TLA2024IRUGR
Texas Instruments
-
MCP3221A5T-E/OT
Microchip Technology
-
MCP3221A5T-I/OT
Microchip Technology
-
MCP3221A4T-E/OT
Microchip Technology
-
MCP3221A6T-E/OT
Microchip Technology
-
MCP3221A0T-E/OT
Microchip Technology
-
MCP3221A1T-E/OT
Microchip Technology
-
ADC121S021CIMFX/NOPB
Texas Instruments
-
MCP3001-I/MS
Microchip Technology
-
MCP3001-I/SN
Microchip Technology
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
