My Inquiry
My Account
Analog Devices Inc. AD9217-6GEBZ
- Part No.:
- AD9217-6GEBZ
- Manufacturer:
- Analog Devices Inc.
- Package:
- Datasheet:
-
AD9217-6GEBZ.pdf
- Description:
- EVAL BOARD FOR AD9217-6
- Quantity:
- Payment:
- Shipping:
Inventory:1,852
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AD9217-6GEBZ from Analog Devices is a 12-bit, 6 GSPS RF analog-to-digital converter with 6.5 GHz input bandwidth, integrated 50 Ω input buffer, −155.1 dBFS/Hz noise spectral density at 170 MHz/−9 dBFS, and CML parallel output interface. It delivers 58.2 dBFS SNR and 70 dBFS SFDR at 1000 MHz input, enabling direct RF sampling in wideband communications infrastructure.
For engineers reviewing the AD9217-6GEBZ datasheet, AD9217-6GEBZ pinout, AD9217-6GEBZ application, or AD9217-6GEBZ equivalent, this evaluation board supports JESD204B mode reconfiguration, fast overrange detection for AGC control, on-chip temperature sensing, and low-latency (225-cycle) pipeline operation - critical for 5G massive MIMO, electronic warfare, and high-speed test equipment design.
Technical Context
The AD9217-6GEBZ implements an interleaved pipeline ADC architecture with proprietary calibration and randomization to suppress spurious artifacts into the noise floor. It supports dual operating modes: native 6 GSPS parallel CML output and reconfigurable AD9213-compatible JESD204B mode via SPI.
Its analog front-end features on-chip negative voltage generators (−1 V, −2 V), 1.4 Vp-p full-scale differential input with overvoltage protection, and a 50 Ω input termination optimized for RF signal chains up to 6.5 GHz. Digital outputs comply with CML logic, requiring 100 Ω differential termination and delivering data with ≤250 ps skew.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Sampling Rate | 6 GSPS maximum - enables Nyquist-zone sampling of signals up to 3 GHz without undersampling. |
| Input Bandwidth | 6.5 GHz - supports direct RF sampling of L/S/C-band radar and 5G FR1/FR2 waveforms. |
| Noise Spectral Density | −155.1 dBFS/Hz at 170 MHz/−9 dBFS - defines minimum detectable signal level in wide FFT bins. |
| SFDR (excl. H2/H3) | −89 dBFS at 1000 MHz - indicates spurious-free dynamic range for multi-carrier LTE/5G signal analysis. |
| Pipeline Latency | 225 clock cycles - enables deterministic timing for closed-loop digital predistortion (DPD) feedback paths. |
| Power Dissipation | 4.2 W typical at 10 GSPS; ~3.3–4.6 W at 6 GSPS - requires thermal management per θJA = 20.5°C/W in BP-192-1 package. |
| Output Interface | CML parallel (12-bit + parity) - eliminates serialization overhead; supports FPGA capture without JESD204B PHY complexity. |
Pinout & Package
AD9217-6GEBZ is housed in a 12 mm × 12 mm, 192-ball BGA-ED (BP-192-1) package with 0.8 mm ball pitch. Thermal resistance: θJA = 20.5°C/W, θJC = 1.6°C/W. Requires exposed thermal pad soldering to PCB ground plane.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VIN_P / VIN_N | Analog RF Input | Differential 50 Ω-terminated input pair; accepts 1.4 Vp-p full-scale signal up to 6.5 GHz. |
| CLK_P / CLK_N | LVPECL Clock Input | Accepts 300–1800 mVp-p differential clock; supports 3.5–10.25 GSPS sampling rates. |
| DOUT_P[0]–DOUT_P[11], DOUT_N[0]–DOUT_N[11] | CML Data Output | 12-bit parallel LSB→MSB; 560–770 mVp-p, 100 Ω-terminated; 97.56 ps data period at 6 GSPS. |
| DCO_P / DCO_N | CML Data Clock Output | Half-rate clock (3 GHz at 6 GSPS); ±200 ps DCO-to-data delay tolerance for FPGA capture alignment. |
| FD | CMOS Fast Detect Output | Active-high overrange flag with 170-cycle latency - triggers AGC within <28 ns at 6 GSPS. |
| SCLK / CSB / SDIO | SPI Interface | 1.8 V–2.0 V compatible; 40 ns SCLK period; enables real-time configuration of thresholds, modes, and calibrations. |
Key Features
| Feature | Design Value |
|---|---|
| Integrated 50 Ω input buffer | Eliminates external matching networks and baluns for 50 Ω RF sources; preserves linearity up to 6.5 GHz. |
| On-chip negative voltage generators | Generates −1 V (BVNN1) and −2 V (BVNN2) supplies internally - reduces external power supply count by two rails. |
| Fast overrange detection (FD) | 170-cycle latency enables sub-30 ns response to input overload - critical for protecting downstream DSP in burst-mode systems. |
| Reconfigurable AD9213 native mode | Enables JESD204B subclass 1 support via SPI without hardware change - extends use to FPGA platforms with JESD PHY only. |
| On-chip temperature sensor (TMU) | Monitors junction temperature with ±2°C accuracy; feeds thermal throttling or calibration compensation algorithms in real time. |
Applications
| 5G Massive MIMO Base Stations | Electronic Warfare (EW) Receivers |
|---|---|
Use Scenario: Digitizing wide instantaneous bandwidth (≥1 GHz) RF signals from active antenna arrays in real time. IC Role / Device Role / Timing Role: Primary RF ADC capturing uplink/downlink channels across 3.3–4.2 GHz band with <100 ps aperture jitter. Use Value: 6.5 GHz analog bandwidth and −155.1 dBFS/Hz NSD enable high-fidelity channel estimation and beamforming without analog downconversion. |
Use Scenario: High-speed signal intelligence (SIGINT) acquisition across L/S/C bands with rapid frequency hopping detection. IC Role / Device Role / Timing Role: Front-end digitizer in wideband DRFM-based jamming systems requiring <225-cycle deterministic latency. Use Value: 70 dBFS SFDR at 1000 MHz and fast FD output allow reliable identification of weak emitters amid strong interferers. |
| High-Speed Test & Measurement Equipment | Radar Signal Processing (AESA) |
Use Scenario: Real-time spectrum analysis and modulation accuracy testing for 5G NR and Wi-Fi 6E transmitters. IC Role / Device Role / Timing Role: Core ADC in vector signal analyzers capturing ≥1 GHz instantaneous bandwidth at 6 GSPS with low CER (<1×10⁻¹⁶). Use Value: Low latency and CML parallel interface simplify FPGA data capture versus JESD204B, reducing system-level timing closure effort. |
Use Scenario: Pulse-Doppler processing in X-band AESA radars requiring high dynamic range and spurious-free operation. IC Role / Device Role / Timing Role: Digitizer for IF or direct-RF sampling in T/R modules, supporting 2600 MHz input with 52.3 dBFS SINAD. Use Value: −89 dBFS worst-other spur and 50.1 dBFS SNR at 2600 MHz ensure accurate target discrimination in cluttered environments. |
Availability
AD9217-6GEBZ is available at Aetrix Electronics and suitable for 5G infrastructure, electronic warfare, high-speed test equipment, and phased-array radar applications requiring stable component supply and long-term design-in support.
Supply support for AD9217-6GEBZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, headquartered in Wilmington, MA.
The AD9217 product line targets wideband RF digitization for defense, communications, and instrumentation - designed to replace multi-chip IF sampling architectures with single-chip direct RF ADC solutions.
FAQ
What is the primary function of the AD9217-6GEBZ evaluation board?
The AD9217-6GEBZ is an evaluation board for the AD9217-6GEBZ IC - not the IC itself. It provides a fully populated, impedance-matched platform to validate the 12-bit, 6 GSPS RF ADC's performance, including CML output capture, SPI configuration, and thermal behavior under real-world RF input conditions. The board includes clock conditioning, power sequencing, and FPGA interface headers to accelerate system prototyping.
Does the AD9217-6GEBZ support JESD204B output?
Yes, the AD9217-6GEBZ IC (not the board alone) supports JESD204B output when configured in AD9213 native mode via SPI register writes. This mode requires external FPGA JESD204B PHY support and is documented in the AD9213 datasheet. The AD9217-6GEBZ evaluation board includes necessary routing and FPGA interface to enable this mode, but JESD204B functionality depends on firmware configuration and host FPGA implementation.
What is the maximum analog input frequency supported by the AD9217-6GEBZ?
The AD9217-6GEBZ IC supports analog input frequencies up to 6.5 GHz - its specified analog full-power bandwidth with internal 50 Ω termination. Performance metrics such as SNR and SFDR are characterized up to 6.5 GHz (e.g., 43.8 dBFS SINAD at 2600 MHz, 49.4 dBFS at 4000 MHz). Operation beyond 6.5 GHz is not guaranteed and falls outside datasheet specifications.
How does the Fast Detect (FD) feature work on the AD9217-6GEBZ?
The Fast Detect (FD) output on the AD9217-6GEBZ IC asserts high within 170 clock cycles when input signal amplitude exceeds a programmable threshold - enabling sub-30 ns response at 6 GSPS. This low-latency overrange indicator is used to trigger automatic gain control (AGC) loops in real time, preventing ADC saturation during burst-mode or pulsed RF events without relying on slower digital post-processing.
What power supply requirements must be met for the AD9217-6GEBZ IC?
The AD9217-6GEBZ IC requires 11 distinct supply domains: AVDD (1.0 V), BVDD2 (2.0 V), BVNN1/BVNN2 (−1.0 V/−2.0 V), DVDD (1.0 V), FVDD (1.0 V), JVDD/JVTT (1.0 V/1.0 V), PLLVDD2 (2.0 V), RVDD2 (2.0 V), SVDD2 (2.0 V), TMU_AVDD2 (2.0 V), and VDD_NVG (1.0 V). Tight regulation (±25 mV) and low-noise filtering are mandatory; the AD9217-6GEBZ evaluation board implements these with dedicated LDOs and ferrite-bead filtering per rail.
AD9217-6GEBZ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Number of A/D Converters:
- 1
- Number of Bits:
- 12
- Sampling Rate (Per Second):
- 6G
- Data Interface:
- Parallel
- Input Range:
- 1.4Vpp
- Power (Typ) @ Conditions:
- -
- Utilized IC / Part:
- AD9217-6
- Contents:
- Board(s)
AD9217-6GEBZ FAQ
1.How can I place an order for AD9217-6GEBZ through Aetrix?
Please submit a Request for Quotation (RFQ) for AD9217-6GEBZ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AD9217-6GEBZ reliable?
The price and inventory of AD9217-6GEBZ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AD9217-6GEBZ is usually 5 days.
3.What payment methods are accepted for AD9217-6GEBZ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AD9217-6GEBZ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AD9217-6GEBZ?
AD9217-6GEBZ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AD9217-6GEBZ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AD9217-6GEBZ?
For technical support, including AD9217-6GEBZ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AD9217-6GEBZ requirements.
6.How does Aetrix verify that AD9217-6GEBZ is sourced from the original manufacturer or authorized distributors?
All AD9217-6GEBZ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AD9217-6GEBZ meets industry standards.
7.What is the process for return or replacement of AD9217-6GEBZ?
All AD9217-6GEBZ units undergo pre-shipment inspection (PSI). If there is an issue with AD9217-6GEBZ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AD9217-6GEBZ part is unused and in its original packaging.
Return procedure for AD9217-6GEBZ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AD9217-6GEBZ Tags
-
1083
Adafruit Industries LLC
-
1085
Adafruit Industries LLC
-
ADS7038Q1EVM-PDK
Texas Instruments
-
ADS8688EVM-PDK
Texas Instruments
-
EVAL-AD7606C18FMCZ
Analog Devices Inc.
-
ADS1232REF
Texas Instruments
-
EVAL-AD4134FMCZ
Analog Devices Inc.
-
EVAL-AD7768FMCZ
Analog Devices Inc.
-
ADC128S102EVM
Texas Instruments
-
ADS124S08EVM
Texas Instruments
-
ADC6140EVM-PDK
Texas Instruments
-
ADS7066EVM-PDK
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
