Analog Devices Inc. ADIS16227/PCBZ

Overview

ADIS16227/PCBZ from Analog Devices is an evaluation interface board designed to simplify prototyping and testing of the ADIS16227CMLZ digital vibration sensor. It provides a 14-pin electrical interface (12-pin populated Hirose A3-12PA-2SV(71) connector), mechanical mounting via four M2 screw holes, and direct compatibility with the ADISUSBZ PC-USB evaluation system for SPI-based data capture and spectral analysis.

For engineers reviewing the ADIS16227/PCBZ datasheet, ADIS16227/PCBZ pinout, ADIS16227/PCBZ application, or ADIS16227/PCBZ equivalent, this board enables rapid integration into Windows XP–based evaluation workflows, supports manual/automatic/event-triggered data acquisition, and delivers access to DIO1/DIO2 signals for alarm monitoring and synchronization.

Technical Context

The ADIS16227/PCBZ serves as a carrier board that mounts the ADIS16227CMLZ-Analog Devices' fully integrated, triaxial digital vibration sensor with on-board FFT engine, spectral alarm detection, and programmable filters. It bridges the LGA-packaged sensor to embedded SPI hosts or the ADISUSBZ via a 2mm-pitch ribbon cable interface.

It implements no active circuitry beyond passive signal routing and power conditioning; all timing, filtering, trigger logic, and spectral processing reside in the ADIS16227CMLZ IC. The board's mechanical design includes resonance-mitigating mounting holes and optional remote-mounting capability via flex-cable disconnection and PCB trimming.

Key Specifications

Availability

ADIS16227/PCBZ is available at Aetrix Electronics and suitable for vibration monitoring, predictive maintenance prototyping, structural health assessment, and industrial condition-based maintenance systems requiring stable component supply and repeatable sensor evaluation infrastructure.

Supply support for ADIS16227/PCBZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing solutions, serving industrial, automotive, communications, and healthcare markets.

The ADIS16227/PCBZ belongs to the iSensor® evaluation tool family, engineered specifically to accelerate development with Analog Devices' MEMS-based inertial sensors by eliminating custom PCB design and soldering of LGA packages during early-stage validation.

FAQ

What is the primary function of the ADIS16227/PCBZ?

The ADIS16227/PCBZ is an evaluation interface board that mounts and electrically connects the ADIS16227CMLZ digital vibration sensor to the ADISUSBZ host system. It eliminates the need to prototype a custom PCB or solder the LGA-packaged sensor, enabling immediate SPI-based data acquisition, spectral analysis, and alarm-triggered capture using Windows XP–compatible software.

Is the ADIS16227/PCBZ compatible with other ADIS1622x sensors?

Yes - the ADIS16227/PCBZ shares mechanical and electrical interface compatibility with the ADIS16223/PCBZ, both designed for the ADIS16223CMLZ and ADIS16227CMLZ respectively. They use identical mounting hole patterns, J1 connector layout, and ADISUSBZ integration steps, though firmware and software are device-specific due to differing internal features like FFT depth and alarm configuration.

Does the ADIS16227/PCBZ include any active circuitry or signal conditioning?

No - the ADIS16227/PCBZ contains only passive routing traces, mounting hardware, and connector interfaces. All signal processing-including 2048-point FFT, spectral alarm detection, programmable band-pass/low-pass filtering, and acceleration measurement-is performed entirely within the mounted ADIS16227CMLZ IC. The board provides no voltage regulation, level shifting, or amplification.

Can the ADIS16227/PCBZ be used without the ADISUSBZ?

Yes - while optimized for use with the ADISUSBZ, the ADIS16227/PCBZ can interface directly with SPI-capable embedded processors via its 12-pin Hirose connector and ribbon cable. Users must provide 3.3 V power, ground, and implement proper SPI timing and DIO1/DIO2 handling per the ADIS16227CMLZ datasheet; no USB driver or Windows software is required in standalone mode.

What operating system is required to run the official ADIS16227 evaluation software?

The official ADIS16227 Evaluation Software requires Windows XP. As documented in the Analog Devices application note, the included drivers (including giveio.sys) are incompatible with Windows Vista, Windows 7, and later versions. No official support exists for macOS or Linux, and virtualization or compatibility modes are not validated for reliable SPI communication or real-time data capture with the ADIS16227/PCBZ and ADISUSBZ.