Microchip Technology ADM00707

Overview

ADM00707 from Microchip Technology is a fully assembled, programmed, and tested 12-bit, 200 Msps analog-to-digital converter (ADC) evaluation board designed to demonstrate the performance of the MCP37X1X-200 device family. It features the MCP37D11-200 ADC in BGA packaging, supports programmable full-scale analog input range, real-time power monitoring, and digital post-processing including decimation filtering and noise-shaping requantization for high-fidelity signal acquisition in RF and communications test systems.

For engineers reviewing the ADM00707 datasheet, ADM00707 pinout, ADM00707 application, or ADM00707 equivalent, this page delivers verified technical context, key specifications, supply readiness, manufacturer background, and targeted FAQs - all focused on rapid integration into high-speed data acquisition, radar front-end validation, and software-defined radio development workflows.

Technical Context

The ADM00707 serves as the ADC interface module in a two-board evaluation system, pairing exclusively with the MCP37XXX High-Speed Pipeline ADC Data Capture Card (ADM00506) to route LVDS output data via FPGA-based buffering to PC-hosted Pipeline ADC Utility Software. It operates at up to 200 Msps sample rate with 1–8 channel multiplexing, where per-channel rate scales inversely with enabled channels (e.g., 200 Msps for 1 channel, 25 Msps for 8 channels).

Power is supplied via dual 5V inputs (1A max), supporting independent or merged analog/digital domains (1.2VA/1.2VD and 1.8VA/1.8VD) through configurable ferrite beads and regulator enable switches. Clocking requires external 200 MHz source - either SMA-connected signal generator, crystal oscillator (e.g., MXT573ABC200M000), or dedicated clock boards like ADM00725 - with strict low-jitter requirements to preserve SNR above 100 MHz input frequencies.

Key Specifications

Availability

ADM00707 is available at Aetrix Electronics and suitable for high-speed data acquisition, RF front-end characterization, and SDR prototyping requiring stable component supply, traceable sourcing, and long-term lifecycle support.

Supply support for ADM00707 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Microchip Technology Inc. is a U.S.-based semiconductor company specializing in microcontrollers, analog devices, and development tools, certified to ISO/TS-16949 and ISO 9001 standards.

The ADM00707 belongs to Microchip's high-speed data conversion evaluation platform line, engineered specifically to accelerate validation of pipeline ADCs in demanding applications such as communications infrastructure, test & measurement instrumentation, and radar signal processing.

FAQ

What is the primary function of the ADM00707 evaluation board?

The ADM00707 is a dedicated evaluation board for the MCP37X1X-200 family of high-speed ADCs. Its primary function is to host the MCP37D11-200 device and provide a complete, ready-to-use platform - including analog input conditioning, programmable power domains, and LVDS output routing - to characterize dynamic performance metrics (SNR, SFDR, INL/DNL) and validate digital post-processing features like decimation filtering and noise-shaping requantization. The ADM00707 does not operate standalone and must be used with the ADM00506 data capture card and Pipeline ADC Utility Software.

Does the ADM00707 include an onboard clock source?

No, the ADM00707 does not include an onboard clock source. It requires an external 200 MHz low-jitter clock applied either via the SMA connector or through a crystal oscillator installed on the unpopulated Y2 footprint. Recommended options include Microchip's MXT573ABC200M000 (single-ended) or MXT575ABA200M000 (LVPECL differential), with supporting passive component modifications documented in DS50002525A. Failure to use a clean, filtered clock will degrade measured SNR, especially at high input frequencies.

Can the ADM00707 be used with ADCs other than the MCP37D11-200?

No - the ADM00707 is specifically designed and populated for the MCP37D11-200 in its BGA package. While it targets the broader MCP37X1X-200 family, the board layout, power sequencing, and signal routing are optimized for that exact device. It is not compatible with non-MCP37X1X-200 ADCs, nor with earlier or later generations lacking identical pinout, voltage domains, or LVDS timing specifications. The BOM and schematics confirm no provision for alternate device substitution.

What software is required to operate the ADM00707?

The Pipeline ADC Utility Software is the mandatory GUI application for configuring, controlling, and analyzing data from the ADM00707. It communicates with the MCP37D11-200 via the ADM00506 data capture card over USB, enabling register programming, real-time FFT analysis, SNR/SFDR calculation, and raw data export. The software is freely downloadable from Microchip's official website and includes built-in help documentation; no third-party drivers or SDKs are required for basic operation.

Is the ADM00707 compatible with CMOS output mode?

No, the ADM00707 is hardware-configured for LVDS output only. The board lacks the termination resistors, level-shifting circuitry, and routing necessary to support CMOS-mode operation of the MCP37D11-200. All digital output signals are routed directly to the LVDS-compatible edge connectors interfacing with the ADM00506 capture card. Attempting to force CMOS mode via software will result in invalid or corrupted data capture.