Analog Devices Inc. ADMV1009-EVALZ

Overview

ADMV1009-EVALZ from Analog Devices is an evaluation board for the ADMV1009 GaAs MMIC upper sideband (USB) differential upconverter, operating from 12.7 GHz to 15.4 GHz RF output with 2.8–4 GHz IF and 9–12.6 GHz LO inputs. It delivers 21 dB typical conversion gain, 20 dB sideband rejection, and integrates matched 50 Ω interfaces for RFOUT, LOIN, and IF1/IF2-designed for microwave radio and radar system prototyping.

For engineers reviewing the ADMV1009-EVALZ datasheet, ADMV1009-EVALZ pinout, ADMV1009-EVALZ application, or ADMV1009-EVALZ equivalent, this board enables rapid characterization of USB upconversion performance, LO-to-RF leakage, IF bandwidth response, and thermal behavior under real-world bias conditions across −40°C to +85°C.

Technical Context

The ADMV1009-EVALZ implements a complete test platform for the ADMV1009 IC, featuring calibrated RF/IF/LO SMA connectors, on-board bias tees, decoupling networks, and thermal vias aligned to the exposed pad. It supports differential IF drive via external 180° balun and provides access to all 32 LCC pins-including VDRF, VDLO, VGRF, VGLO, and VGMIX-for independent gate voltage tuning and current monitoring.

Designed per Analog Devices' reference layout guidelines, the board maintains controlled-impedance 50 Ω microstrip routing, ground plane integrity across RF/LO/IF paths, and thermal management optimized for the ADMV1009's 1.55 W typical power dissipation and 31 °C/W junction-to-case thermal resistance in its 4.9 mm × 4.9 mm LCC package.

Key Specifications

Availability

ADMV1009-EVALZ is available at Aetrix Electronics and suitable for microwave radio development, electronic warfare subsystem validation, and automated test equipment calibration requiring stable component supply and traceable evaluation hardware.

Supply support for ADMV1009-EVALZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and RF integrated circuits, headquartered in Norwood, MA, with design centers worldwide and a legacy of innovation in signal processing and precision electronics.

The ADMV1009 product line targets millimeter-wave communication and defense systems, delivering compact, surface-mount SSB upconversion solutions that replace hybrid assemblies and eliminate wire bonding in 5G backhaul, radar front-ends, and instrumentation platforms.

FAQ

What is the primary function of the ADMV1009-EVALZ?

The ADMV1009-EVALZ is an evaluation board designed exclusively to characterize and validate the performance of the ADMV1009 GaAs MMIC upper sideband upconverter. It provides full RF/IF/LO connectivity, bias control, and thermal management-enabling measurement of conversion gain, sideband rejection, IP3, P1dB, and leakage across temperature and frequency without custom PCB development. The ADMV1009-EVALZ does not operate as a standalone signal generator or transceiver.

Does ADMV1009-EVALZ support both upper and lower sideband operation?

No. The ADMV1009-EVALZ is configured specifically for upper sideband (USB) upconversion, matching the native architecture of the ADMV1009 IC. Its layout, balun interface recommendations, and calibration data assume USB operation only; no provision exists for LSB mode without hardware modification. The ADMV1009-EVALZ documentation and test procedures do not address LSB configuration or performance verification.

What external components are required to operate ADMV1009-EVALZ?

To operate ADMV1009-EVALZ, users must supply: (1) an external 180° IF balun (e.g., Mini-Circuits NCS1-422+) for differential IF drive; (2) three independent DC bias supplies for VDRF, VDLO, and gate voltages (VGRF, VGLO, VGMIX); and (3) calibrated RF/LO/IF signal sources and measurement equipment (VNA, spectrum analyzer). No additional passive components are needed-the board includes all required decoupling, bias tees, and termination networks.

Can ADMV1009-EVALZ be used for production deployment?

No. ADMV1009-EVALZ is strictly an engineering evaluation platform-not qualified for production use. It lacks environmental qualification (e.g., extended temperature cycling, shock/vibration testing), conformal coating, or long-term reliability validation. For production integration, designers must implement the ADMV1009 IC onto a custom PCB following Analog Devices' layout guidelines, thermal design rules, and RF matching requirements outlined in the ADMV1009 datasheet.

Where can I find schematics and bill-of-materials for ADMV1009-EVALZ?

The complete schematic, PCB layout files (Gerber), and bill-of-materials for ADMV1009-EVALZ are published in the "Evaluation Board Information" section (page 20) and "Bill of Materials" section (page 22) of the ADMV1009 Rev. B datasheet. These documents are available for download directly from Analog Devices' official product page for ADMV1009 at analog.com, with no registration required.