Analog Devices Inc. ADRV9002NP/W2/PCBZ

Overview

ADRV9002NP/W2/PCBZ from Analog Devices is a fully integrated RF agile transceiver evaluation platform supporting FDD and TDD operation from 30 MHz to 6 GHz, with 40 MHz signal bandwidth, integrated DPD, and dual-channel 2T2R architecture. It serves as the hardware reference for the ADRV9002 transceiver IC in portable radio, small-cell, and repeater applications.

For engineers reviewing the ADRV9002NP/W2/PCBZ datasheet, ADRV9002NP/W2/PCBZ pinout, ADRV9002NP/W2/PCBZ application, or ADRV9002NP/W2/PCBZ equivalent, this page delivers verified board-level specifications, interface configuration options (CMOS/LVDS SSI), power supply requirements (1.0 V, 1.3 V, 1.8 V), thermal operating range (−40°C to +85°C), and integration guidance with Zynq-based baseband processors.

Technical Context

The ADRV9002NP/W2/PCBZ implements the full ADRV9002 transceiver IC in a production-ready PCB layout optimized for RF isolation, multichip synchronization (MCS), and low-phase-noise clocking via integrated LP CLKPLL. It supports simultaneous dual-band operation using independent LO1± and LO2± ports and enables closed-loop DPD calibration using main receivers as observation paths.

Hardware abstraction is provided through the Analog Devices Transceiver Evaluation Software (TES), with SPI-controlled state machine sequencing, programmable FIR filtering, AGC timing control, and monitor mode support for RSSI, FFT, and SYNC detection - all accessible via standardized API calls and GPIO-configurable hardware triggers.

Key Specifications

Availability

ADRV9002NP/W2/PCBZ is available at Aetrix Electronics and suitable for small-cell base stations, portable TETRA/DMR radios, and FDD/TDD repeater systems requiring stable component supply, full evaluation capability, and production-intent RF layout validation.

Supply support for ADRV9002NP/W2/PCBZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving communications, industrial, automotive, and healthcare markets since 1965.

The ADRV9002NP/W2/PCBZ belongs to Analog Devices' RF Agile Transceiver Evaluation Platform product line, engineered to accelerate development of battery-efficient, spectrum-flexible wireless infrastructure and portable radio equipment compliant with 3GPP, TETRA, DMR, and private LTE standards.

FAQ

What is the ADRV9002NP/W2/PCBZ used for?

The ADRV9002NP/W2/PCBZ is an evaluation and development platform for the ADRV9002 RF transceiver IC. It enables rapid prototyping of 2T2R FDD/TDD radios operating from 30 MHz to 6 GHz. Engineers use the ADRV9002NP/W2/PCBZ to validate RF performance, calibrate DPD, test MCS synchronization, and integrate with Zynq-based baseband processors before moving to custom PCB design.

Does the ADRV9002NP/W2/PCBZ include the ADRV9002 IC?

Yes, the ADRV9002NP/W2/PCBZ integrates the full ADRV9002 transceiver IC in its final production-grade package. The board is not a bare PCB - it ships with the ADRV9002 die mounted, all critical RF matching networks populated, and calibrated for optimal noise figure, linearity, and LO leakage per the ADRV9002 datasheet specifications.

Which host processors are compatible with the ADRV9002NP/W2/PCBZ?

The ADRV9002NP/W2/PCBZ is natively supported by Xilinx Zynq-7000 (ZC706) and Zynq UltraScale+ (ZCU102) FPGA platforms. Reference designs, HDL IP cores, Linux device drivers, and TES software are provided by Analog Devices specifically for these hosts. Other processors require custom interface logic but can connect via the standard CMOS/LVDS SSI and SPI interfaces on the ADRV9002NP/W2/PCBZ.

Can the ADRV9002NP/W2/PCBZ operate in monitor mode?

Yes, the ADRV9002NP/W2/PCBZ supports all ADRV9002 monitor modes including RSSI, FFT, SYNC, and RSSI-FFT combinations - enabled via TES or direct API commands. These modes allow low-power spectral scanning, interference detection, and channel occupancy analysis without full transceiver activation, extending battery life in portable radio applications using the ADRV9002NP/W2/PCBZ.

Is multichip synchronization (MCS) supported on the ADRV9002NP/W2/PCBZ?

Yes, the ADRV9002NP/W2/PCBZ includes dedicated MCS input routing, matched-length traces, and termination for precise phase alignment across multiple ADRV9002 devices. The board implements the MCS protocol defined in the ADRV9002 datasheet and supports both master-slave and daisy-chain topologies - essential for phased-array radar and wideband MIMO repeater designs using the ADRV9002NP/W2/PCBZ.