Analog Devices Inc. ADRV9008-2W/PCBZ

Overview

ADRV9008-2W/PCBZ from Analog Devices is an FMC-compatible radio evaluation card designed to prototype and validate the ADRV9008-2 dual-channel RF transceiver in SDR systems. It supports 75 MHz–6 GHz RF bandwidth, 2×2 MIMO operation, JESD204B/C interface at up to 12.288 Gbps, and integrates AD9528 clock generation and AD7291 monitoring ADCs for full signal chain evaluation.

For engineers reviewing the ADRV9008-2W/PCBZ datasheet, ADRV9008-2W/PCBZ pinout, ADRV9008-2W/PCBZ application, or ADRV9008-2W/PCBZ equivalent, this board enables rapid Linux IIO-based SDR development, FPGA HDL integration with Xilinx Zynq UltraScale+ MPSoC, and hardware-in-the-loop validation of RF transceiver profiles including custom VCXO tuning and JESD204 eye scan diagnostics.

Technical Context

The ADRV9008-2W/PCBZ implements a complete RF front-end reference design centered on the ADRV9008-2 transceiver, interfacing directly to FMC-HPC connectors on host carriers like the Xilinx ZCU102. It routes all JESD204B/C lanes, SPI control, GPIO status signals, and analog RF paths (TX/RX/SX) with matched 50 Ω impedance and calibrated DC coupling.

Onboard support includes AD9528 low-jitter clock distribution (with programmable VCXO), AD7291 temperature/voltage monitor, FRU EEPROM for board identification, and AXI-DMAC DMA controller logic embedded in the reference HDL design - all coordinated via the Linux IIO subsystem and ACE software.

Key Specifications

Availability

ADRV9008-2W/PCBZ is available at Aetrix Electronics and suitable for SDR prototyping, 5G NR base station development, radar waveform testing, and university RF lab instruction requiring stable component supply and full Linux IIO toolchain support.

Supply support for ADRV9008-2W/PCBZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, serving communications, industrial, automotive, and instrumentation markets since 1965.

The ADRV9008-2W/PCBZ belongs to Analog Devices' RadioVerse™ evaluation platform family, engineered specifically to accelerate time-to-proof for wideband RF transceiver integration in software-defined radio and phased-array systems.

FAQ

What is the primary function of the ADRV9008-2W/PCBZ?

The ADRV9008-2W/PCBZ is an FMC-HPC evaluation card that hosts the ADRV9008-2 RF transceiver for rapid prototyping of SDR systems. It provides full JESD204B/C connectivity, clock distribution via AD9528, analog RF I/O, and Linux IIO driver support - enabling immediate evaluation of the ADRV9008-2's dual-channel 75 MHz–6 GHz transceiver capabilities without custom PCB design.

Which host carrier boards are compatible with the ADRV9008-2W/PCBZ?

The ADRV9008-2W/PCBZ is designed for FMC-HPC carriers compliant with ANSI/VITA 57.1, including the Xilinx ZCU102, ZCU111, and Avnet Ultra96-V2. Compatibility requires matching JESD204B/C lane count, voltage levels (1.8 V LVDS), and clock routing; the official Analog Devices HDL reference design targets ZCU102 specifically and is validated for use with the ADRV9008-2W/PCBZ.

Does the ADRV9008-2W/PCBZ support both transmit and receive operation simultaneously?

Yes, the ADRV9008-2W/PCBZ supports full 2×2 MIMO operation with simultaneous transmit and receive on independent RF paths. The onboard ADRV9008-2 IC integrates two fully independent transceiver cores, each with dedicated TX and RX chains, and the board preserves all necessary isolation, biasing, and calibration paths required for TDD or FDD mode operation as defined in the ADRV9008-2 datasheet.

How is clocking managed on the ADRV9008-2W/PCBZ?

Clocking on the ADRV9008-2W/PCBZ is managed by the AD9528 low-jitter clock generator, which distributes synchronized clocks to the ADRV9008-2, FPGA fabric, and JESD204B/C transceivers. The board includes a 100 MHz VCXO, and frequency tuning is supported via I2C from Linux userspace or ACE software - enabling precise alignment of sample clocks and RF LO synthesis required for the ADRV9008-2W/PCBZ's wideband operation.

Can the ADRV9008-2W/PCBZ be used with MATLAB and Simulink?

Yes, the ADRV9008-2W/PCBZ is fully supported in MATLAB and Simulink through the Analog Devices Transceiver Toolbox and HDL Coder workflows. Users can generate and deploy custom HDL for the FPGA portion, configure RF profiles using the MATLAB Filter Wizard, stream real-time I/Q data via IIO, and perform hardware-in-the-loop validation - all targeting the exact signal chain implemented on the ADRV9008-2W/PCBZ.