Analog Devices Inc. ADRV9026-HB/PCBZ

Overview

ADRV9026-HB/PCBZ from Analog Devices is a high-performance, quad-channel RF transceiver evaluation platform for the ADRV9026 integrated transceiver IC. It implements four independent 75–6000 MHz transmitters, four 200 MHz receivers, two time-shared observation receivers (450 MHz bandwidth), multichip phase synchronization, and JESD204B/C digital interface up to 24.33 Gbps - enabling rapid prototyping of 5G massive MIMO, TDD/FDD small cell, and macro base station radios.

For engineers reviewing the ADRV9026-HB/PCBZ datasheet, ADRV9026-HB/PCBZ pinout, ADRV9026-HB/PCBZ application, or ADRV9026-HB/PCBZ equivalent, this board provides full access to all ADRV9026 signal paths, SPI control, GPIOs, SYSREF, DEVCLK, SYNC signals, and JESD204B/C lanes - supporting RF performance validation, multichip synchronization testing, and real-time waveform capture at up to 491.52 MSPS I/Q rate.

Technical Context

The ADRV9026-HB/PCBZ is a hardware evaluation platform designed exclusively for the ADRV9026 RF transceiver IC. It routes all 289-ball CSP_BGA signals to edge-mounted SMA connectors (RX/TX/ORX), high-speed Samtec QSH/QTH connectors (JESD204B/C SERDES), and 0.1" headers (SPI, GPIO, power, clocks), with on-board LDOs delivering 1.0 V, 1.3 V, and 1.8 V rails per ADRV9026 specification.

It supports full multichip synchronization via SYNCIN1±/SYNCIN2±/SYNCIN3± and SYNCOUT1±/SYNCOUT2± differential pairs, enables TDD/FDD timing verification using TXx_EN/RXx_EN control lines, and integrates calibrated RF front-end matching networks for 75–5700 MHz operation - preserving ADRV9026's specified noise figure, ACLR, EVM, and image rejection across all bands.

Key Specifications

Availability

ADRV9026-HB/PCBZ is available at Aetrix Electronics and suitable for 5G base station development, RFIC validation, multichip synchronization testing, and JESD204C interface integration requiring stable component supply and traceable engineering support.

Supply support for ADRV9026-HB/PCBZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and RF technologies, headquartered in Norwood, MA, serving communications, industrial, automotive, and healthcare markets.

The ADRV9026-HB/PCBZ belongs to Analog Devices' RadioVerse™ portfolio - a family of highly integrated RF transceivers and evaluation platforms engineered specifically for cellular infrastructure applications including 3G/4G/5G TDD/FDD base stations, massive MIMO, and software-defined radio systems.

FAQ

What is the ADRV9026-HB/PCBZ used for?

The ADRV9026-HB/PCBZ is an evaluation board designed to accelerate development and validation of systems using the ADRV9026 quad RF transceiver IC. It provides full access to all RF, digital, clock, and control interfaces - enabling engineers to verify RF performance, test multichip synchronization, validate JESD204B/C data integrity, and develop firmware for 5G TDD/FDD base station radios without custom PCB design.

Does the ADRV9026-HB/PCBZ include the ADRV9026 IC?

Yes, the ADRV9026-HB/PCBZ includes one pre-mounted ADRV9026 IC in its native 14 mm × 14 mm, 289-ball CSP_BGA package. The board is fully assembled and tested, with all required power sequencing, clock distribution, and RF matching networks implemented per Analog Devices' reference design guidelines for the ADRV9026.

Can the ADRV9026-HB/PCBZ support JESD204C operation?

Yes, the ADRV9026-HB/PCBZ supports both JESD204B and JESD204C standards on its four serializer/deserializer lanes, operating at data rates up to 24.33 Gbps. The board's layout, termination, and connector selection comply with JESD204C signal integrity requirements, enabling direct connection to compatible FPGA or ASIC devices implementing the JESD204C protocol stack.

How does the ADRV9026-HB/PCBZ enable multichip synchronization?

The ADRV9026-HB/PCBZ implements full multichip synchronization capability via dedicated differential SYNCIN1±/SYNCIN2±/SYNCIN3± and SYNCOUT1±/SYNCOUT2± interfaces, aligned with the ADRV9026's internal synchronization architecture. These signals coordinate phase alignment of all local oscillators and baseband clocks across multiple ADRV9026-HB/PCBZ boards - essential for coherent massive MIMO antenna array development.

Is RF calibration required before using the ADRV9026-HB/PCBZ?

Yes, the ADRV9026-HB/PCBZ requires factory-calibrated or user-performed RF calibration to achieve datasheet-specified performance. The board supports full digital calibration routines (QEC, DC offset, gain/phase matching) via the ADRV9026's built-in engine and Analog Devices' Transceiver Evaluation Software (TES). Calibration must be performed per frequency band and configuration to ensure optimal ACLR, EVM, and image rejection as documented in the ADRV9026 datasheet.