My Inquiry
My Account
Diodes Incorporated AP130-18YRG-13
- Part No.:
- AP130-18YRG-13
- Manufacturer:
- Diodes Incorporated
- Package:
- TO-243AA
- Datasheet:
-
AP130-18YRG-13.pdf
- Description:
- IC REG LIN 1.8V 300MA SOT89R-3
- Quantity:
- Payment:
- Shipping:
Inventory:1,029
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP130-18YRG-13 from Diodes Incorporated is a fixed 1.8V, 300mA low-dropout linear regulator in SOT89R-3L package, featuring 400mV dropout at full load, ±2% output voltage accuracy, and 50µA quiescent current. It integrates thermal shutdown, current limit with fold-back, and operates across 2.7V–5.5V input range for battery-powered peripherals and embedded I/O rails.
For engineers reviewing the AP130-18YRG-13 datasheet, AP130-18YRG-13 pinout, AP130-18YRG-13 application, or AP130-18YRG-13 equivalent, key selection criteria include dropout performance under 300mA load, stability with 10µF output capacitance, thermal resistance (θJC = 23°C/W), and compatibility with SC59R/SOT23/SOT89 variants in space-constrained designs.
Technical Context
The AP130-18YRG-13 uses a PMOS pass element with 1.5Ω RON, eliminating base drive current and enabling ultra-low quiescent current. Its bandgap-referenced error amplifier delivers fast transient response and tight load regulation (±40mV over 1–300mA).
Internal protection includes thermal shutdown triggered at TJ ≥ 125°C and current limiting with short-circuit fold-back (150–300mA). The device requires only a 10µF ceramic output capacitor for stability and achieves 58dB PSRR at 100Hz.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | Fixed 1.8V ±2% - ensures stable core supply for 1.8V logic and low-power microcontrollers. |
| Max Output Current | 300mA - supports moderate-power peripherals like USB PHYs or sensor interfaces without derating. |
| Dropout Voltage | 400mV (typ) at 300mA - enables operation down to 2.2V input, critical for single-cell Li-ion or Li-poly systems. |
| Quiescent Current | 50µA (typ) - minimizes standby power loss in always-on battery-backed circuits. |
| PSRR | 58dB at 100Hz - suppresses ripple from noisy switchers or shared DC-DC rails feeding mixed-signal ICs. |
| Thermal Resistance θJC | 23°C/W - allows direct heat transfer to PCB copper in SOT89R-3L, supporting continuous 300mA at +85°C ambient. |
| Protection Features | Current limit with fold-back + thermal shutdown - prevents latch-up and permanent damage during overload or poor heatsinking. |
Pinout & Package
SOT89R-3L package: 3-pin surface-mount, lead-free, green molding compound; exposed tab for thermal conduction; footprint matches JEDEC TO-243AA standard.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1: GND | Ground reference | Primary return path for load current and internal bias; must connect to low-impedance ground plane for stability and thermal dissipation. |
| 2: IN | Input voltage supply | Accepts 2.7–5.5V; requires ≥1µF input capacitor near pin to suppress source impedance during load transients. |
| 3: OUT | Regulated output | Delivers fixed 1.8V; requires ≥10µF ceramic capacitor to ground for phase margin and transient recovery. |
Key Features
| Feature | Design Value |
|---|---|
| PMOS pass transistor | Zero gate drive current enables 50µA IQ independent of load - ideal for energy harvesting and coin-cell applications. |
| Fast transient response | Stabilizes within <10µs after 100mA step load change - maintains voltage integrity for burst-mode digital loads. |
| Short-circuit fold-back | Limits output current to 150–300mA during fault, reducing power dissipation and junction temperature rise. |
| Green RoHS-compliant packaging | SOT89R-3L with halogen-free, antimony-free molding compound - meets IPC-1752A Class 3 environmental compliance. |
Applications
| Battery-Powered Wireless Sensor Node | USB Peripheral Interface Card |
|---|---|
Use Scenario: Compact IoT node powered by CR2032 or single-cell Li-ion with BLE SoC and analog sensors. IC Role / Device Role / Timing Role: Primary 1.8V LDO supplying RF transceiver core and ADC reference. Use Value: 400mV dropout extends usable battery life by >15% vs. higher-dropout regulators; 50µA IQ enables multi-year shelf life. |
Use Scenario: Add-in card for desktop PC providing USB 2.0 host functionality with integrated PHY and hub controller. IC Role / Device Role / Timing Role: Local 1.8V rail for USB PHY termination and clock buffer ICs. Use Value: 58dB PSRR rejects noise from main 3.3V/5V DC-DC converters; thermal shutdown prevents failure during hot-plug events. |
| Industrial PLC I/O Module | Embedded Camera Interface Board |
Use Scenario: DIN-rail mounted controller with isolated digital inputs and 1.8V FPGA configuration memory. IC Role / Device Role / Timing Role: Post-regulator for isolated 3.3V-to-1.8V conversion in safety-isolated domain. Use Value: ±2% output accuracy ensures reliable FPGA bitstream loading; current fold-back protects isolation barrier during field-wiring faults. |
Use Scenario: MIPI CSI-2 camera module with image sensor, ISP, and flash LED driver on compact 2-layer PCB. IC Role / Device Role / Timing Role: Dedicated 1.8V supply for MIPI receiver core and sensor interface logic. Use Value: Fast transient response prevents frame drop during auto-exposure changes; SOT89R-3L's 23°C/W θJC enables passive cooling without heatsink. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar fixed-output LDO regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AP2202K-18W5G-7 | 200mA rated, SOT23-5 package, 350mV dropout at 200mA, 65µA IQ | Lower current capacity; requires different footprint and layout; better suited for space-constrained sub-200mA rails | Select when board area is critical and load never exceeds 200mA; verify thermal margin with θJA = 200°C/W. |
| MCP1700T-1802E/TT | 250mA rated, SOT23-3 package, 600mV dropout at 250mA, 1.6µA IQ (ultra-low) | Higher dropout limits minimum input to 2.4V; ultra-low IQ favors long-term battery monitoring over high-current bursts | Prefer for coin-cell applications >5-year life where peak load ≤250mA and input stays ≥2.4V. |
Compared with AP2202K-18W5G-7 and MCP1700T-1802E/TT, the AP130-18YRG-13 uniquely balances 300mA capability, 400mV dropout, and 50µA IQ in a thermally robust SOT89R-3L package-making it optimal for mid-power embedded systems requiring both efficiency and ruggedness.
Availability
AP130-18YRG-13 is available at Aetrix Electronics and suitable for battery-powered wireless sensor nodes, USB peripheral interface cards, and industrial PLC I/O modules requiring stable component supply with consistent parametric performance and long-lifecycle availability.
Supply support for AP130-18YRG-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in power management, signal integrity, and protection solutions for industrial, computing, and consumer markets.
The AP130 series targets cost-sensitive, space-constrained applications needing reliable fixed-output LDO regulation with integrated protection-designed specifically for battery-powered peripherals, PC add-ons, and embedded I/O subsystems.
FAQ
What is the minimum input voltage required for AP130-18YRG-13 to maintain regulation at 300mA?
The AP130-18YRG-13 requires VIN ≥ VOUT + VDROP = 1.8V + 0.4V = 2.2V to sustain 300mA output. Per datasheet, guaranteed operation starts at 2.7V input, but functional dropout behavior is characterized down to 2.2V with pulsed testing. Below 2.7V, line regulation degrades slightly but remains within ±2% up to 300mA if junction temperature is controlled.
Can AP130-18YRG-13 be used with ceramic output capacitors smaller than 10µF?
No-datasheet specifies a minimum 10µF ceramic capacitor at the output for stability across all operating conditions. Using <10µF risks oscillation or poor transient response due to insufficient phase margin. Equivalent series resistance (ESR) must be <100mΩ; X5R or X7R dielectrics are recommended.
How does the short-circuit fold-back protection behave under sustained fault conditions?
Under short-circuit, output current drops to 150–300mA (typ), reducing power dissipation and preventing thermal runaway. Junction temperature rises until thermal shutdown activates at ~125°C, then the device latches off until cooldown. After reset, it resumes normal operation if fault is cleared.
Is the SOT89R-3L package of AP130-18YRG-13 pin-compatible with standard SOT89-3L?
No-the SOT89R-3L has reversed pinout: Pin 1 = GND, Pin 2 = IN, Pin 3 = OUT, whereas standard SOT89-3L is Pin 1 = OUT, Pin 2 = GND, Pin 3 = IN. Layouts must be verified against Diodes' AP02007 land pattern; mixing footprints causes immediate functional failure.
AP130-18YRG-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-243AA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 5.5V
- Voltage - Output (Min/Fixed):
- 1.8V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.5V @ 300mA
- Current - Output:
- 300mA
- Current - Quiescent (Iq):
- 100 µA
- Current - Supply (Max):
- -
- PSRR:
- 58dB (100Hz)
- Control Features:
- -
- Protection Features:
- Over Current, Over Temperature, Short Circuit
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-89R-3
AP130-18YRG-13 FAQ
1.How can I place an order for AP130-18YRG-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP130-18YRG-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP130-18YRG-13 reliable?
The price and inventory of AP130-18YRG-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP130-18YRG-13 is usually 5 days.
3.What payment methods are accepted for AP130-18YRG-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP130-18YRG-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP130-18YRG-13?
AP130-18YRG-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP130-18YRG-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP130-18YRG-13?
For technical support, including AP130-18YRG-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP130-18YRG-13 requirements.
6.How does Aetrix verify that AP130-18YRG-13 is sourced from the original manufacturer or authorized distributors?
All AP130-18YRG-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP130-18YRG-13 meets industry standards.
7.What is the process for return or replacement of AP130-18YRG-13?
All AP130-18YRG-13 units undergo pre-shipment inspection (PSI). If there is an issue with AP130-18YRG-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP130-18YRG-13 part is unused and in its original packaging.
Return procedure for AP130-18YRG-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP130-18YRG-13 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
