My Inquiry
My Account
Diodes Incorporated AP2006SL-13
- Part No.:
- AP2006SL-13
- Manufacturer:
- Diodes Incorporated
- Category:
- Voltage Regulators - Linear + Switching
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
AP2006SL-13.pdf
- Description:
- IC REG DL BUCK/LNR 250KHZ 8SOP
- Quantity:
- Payment:
- Shipping:
Inventory:2,728
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP2006SL-13 from Anachip Corp. is a dual-output monolithic DC/DC controller integrating a 250 kHz PWM buck controller (driving external PMOS) and a linear controller (driving external NPN or NMOS), with adjustable output voltage (1.23 V ±2.5%), thermal shutdown, current-limit protection, and SS/EN soft-start/enable function. It operates from 4.5–22 V input and delivers two regulated outputs in SOP-8 package for compact on-card power supplies.
For engineers reviewing the AP2006SL-13 datasheet, AP2006SL-13 pinout, AP2006SL-13 application, or AP2006SL-13 equivalent, key selection considerations include its dual-regulator architecture, 250 kHz fixed switching frequency, feedback voltage tolerance (±2.5%), SCP threshold (0.67 V typ), and SOP-8 thermal performance (400 mW PD).
Technical Context
The AP2006SL-13 implements a synchronous-capable PWM buck stage with internal 1.23 V reference and error amplifier for FB1 feedback, plus a separate linear regulator stage with 1.20–1.23 V FB2 reference and 30 mA pre-driver for external NPN/NMOS. Its 250 kHz oscillator enables smaller LC filters versus lower-frequency controllers.
Control logic integrates soft-start via constant-current charging of SS/EN pin to 2.4 V, standby mode activation via logic-level EN input (VIL ≤0.2 V, VIH ≥1.0 V), and short-circuit protection triggered at 0.67 V on SCP pin with latched shutdown at <100 mV.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switching Frequency | 250 kHz ±20% - enables use of smaller inductors and output capacitors than 100 kHz designs |
| FB1 Reference Voltage | 1.23 V ±2.5% - sets adjustable buck output as VOUT1 = 1.23 × (1 + R3/R4) |
| FB2 Reference Voltage | 1.20–1.23 V - sets linear output as VOUT2 = 1.25 × (1 + R1/R2) in typical circuits |
| SCP Threshold | 0.67 V typ - triggers short-circuit protection when sensed voltage exceeds this level |
| Quiescent Current | 6 mA max - defines minimum operating current draw during active regulation |
| Operating Voltage Range | 4.5–22 V - supports wide-input industrial and telecom supply rails |
| Power Dissipation (SOP-8) | 400 mW - limits thermal design margin in ambient up to +125°C |
Pinout & Package
AP2006SL-13 is housed in an SOP-8L (Small Outline Package, 8-lead) with standard 1.27 mm pitch, 5.05 mm width, and 3.90 mm body length. Thermal resistance θJA ≈ 312.5°C/W (calculated from 400 mW PD and 125°C max Tj).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VCC (Pin 5) | Supply input | Primary power rail (4.5–22 V); powers internal bias, oscillator, and drivers |
| GND (Pin 4) | Ground reference | Analog and power ground return for all internal blocks and feedback networks |
| FB1 (Pin 1) | PWM output feedback | Senses buck output voltage; internal 1.23 V comparator sets regulation point |
| FB2 (Pin 2) | Linear output feedback | Senses linear regulator output; internal 1.20–1.23 V reference enables precise tracking |
| SCP (Pin 3) | Short-circuit protect input | Active-low fault input; 0.67 V threshold initiates latch-off on overcurrent |
| SS/EN (Pin 6) | Soft-start/Enable control | Logic-enable input (VIH ≥1.0 V); also accepts soft-start capacitor for controlled ramp-up |
| OUT1 (Pin 7) | PWM gate driver output | Drives external PMOS gate; 200 mA source / 300 mA sink capability |
| OUT2 (Pin 8) | Linear pre-driver output | 30 mA current-limited NPN/NMOS base/gate driver with saturation voltage ≤1.2 V |
Key Features
| Feature | Design Value |
|---|---|
| Dual independent regulators | Simultaneous PWM buck (OUT1/FB1) and linear (OUT2/FB2) outputs reduce BOM count vs. discrete solutions |
| Integrated compensation | Internal error amplifiers eliminate need for external compensation components in standard configurations |
| Thermal shutdown & current limit | Protects IC and external switches under overload or ambient overtemperature (>125°C) |
| Low-power standby mode | EN pin disables both regulators, reducing IQ to ≤0.2 mA for system-level power gating |
| Pb-free SOP-8 package | RoHS-compliant lead finish with 260°C reflow profile compatibility |
Applications
| DSL Line Card Power | XDSL Modem Supply |
|---|---|
Use Scenario: Providing isolated 3.3 V and 1.8 V rails on DSL line cards with space constraints and thermal limits. IC Role / Device Role / Timing Role: Dual-output controller managing primary buck conversion and secondary linear post-regulation. Use Value: Reduces component count by eliminating separate linear LDO and PWM ICs while maintaining ±2.5% output accuracy. | Use Scenario: Generating stable low-noise 1.25 V core and 3.3 V I/O voltages in XDSL modems with variable load transients. IC Role / Device Role / Timing Role: PWM stage handles high-efficiency bulk conversion; linear stage filters ripple for noise-sensitive analog sections. Use Value: 250 kHz switching minimizes EMI and allows ceramic output caps; linear stage achieves <10 mVpp ripple without added filtering. |
| Industrial Sensor Node | Legacy Telecom Board |
Use Scenario: Powering microcontroller and analog sensor circuitry in battery-backed industrial nodes requiring long-term stability. IC Role / Device Role / Timing Role: Regulates from wide-input 12 V supply to 3.3 V MCU rail and 1.8 V sensor rail with enable-controlled sequencing. Use Value: SS/EN pin enables synchronized startup; 4.5–22 V range accommodates aging batteries and unregulated wall adapters. | Use Scenario: Retrofitting obsolete single-rail supplies on legacy telecom boards needing dual-voltage support. IC Role / Device Role / Timing Role: Replaces discrete transistor-based linear regulators and older PWM controllers with single SOP-8 IC. Use Value: Pin-compatible upgrade path for AP2006-series designs; maintains existing PCB layout and feedback resistor networks. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-output DC/DC controller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AP2005SL-13 | Same pinout and topology but 150 kHz oscillator; higher VFB1 tolerance (±3%) | Lower switching frequency increases inductor size; less suitable for space-constrained designs | Select when lower EMI priority outweighs board area constraints |
| MP2307DN-LF-Z | Single-channel 2A synchronous buck only; no integrated linear controller or FB2 path | Requires external LDO for second rail; increases total solution size and cost | Choose only if dual-rail functionality is not required or can be implemented separately |
Compared with AP2005SL-13, AP2006SL-13 offers tighter feedback tolerance and higher frequency for smaller magnetics; versus MP2307DN-LF-Z, it eliminates the need for a second regulator IC but lacks synchronous rectification efficiency.
Availability
AP2006SL-13 is available at Aetrix Electronics and suitable for DSL line card power, XDSL modem supply, and industrial sensor node applications requiring stable component supply and legacy-compatible packaging.
Supply support for AP2006SL-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Anachip Corp. is a Taiwan-based fabless semiconductor company specializing in analog and power management ICs for consumer, telecom, and industrial markets since 1997.
The AP2006 series was designed specifically for cost-sensitive, space-constrained dual-rail power systems in broadband access equipment and legacy telecom infrastructure.
FAQ
Is AP2006SL-13 pin-compatible with AP2006DIP-13?
Yes - both share identical pin assignments (VCC, GND, FB1, FB2, SCP, SS/EN, OUT1, OUT2) and electrical specifications. The only difference is package type: SOP-8L versus DIP-8L. Layout adaptation is required for footprint, but schematic and feedback network design remain identical.
What is the maximum recommended output current for the linear controller (OUT2)?
The linear controller's pre-driver (OUT2) is rated for 30 mA continuous current into an external NPN base or NMOS gate. When driving a typical NPN with hFE=100, this supports up to ~3 A collector current - but actual safe output current depends on external transistor SOA, heatsinking, and VCC–VOUT2 headroom per the 1.2 V saturation voltage spec.
Can AP2006SL-13 operate with input voltage below 4.5 V?
No - the absolute minimum operating voltage is 4.5 V per datasheet Absolute Maximum Ratings. Below this, internal bias generation fails, oscillator stops, and regulation is not guaranteed. Startup may occur near 4.3 V (VUT threshold), but sustained operation requires ≥4.5 V.
Does AP2006SL-13 support synchronization to an external clock?
No - the 250 kHz oscillator is internal and fixed-frequency only. There is no SYNC pin or frequency adjustment interface. Applications requiring clock synchronization must use alternative controllers such as the MP2315 or RT7290B with dedicated sync inputs.
AP2006SL-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Topology:
- Step-Down (Buck) (1), Linear (LDO) (1)
- Number of Outputs:
- 2
- Frequency - Switching:
- 250kHz
- Voltage/Current - Output 1:
- Controller
- Voltage/Current - Output 2:
- Controller
- Voltage/Current - Output 3:
- -
- w/LED Driver:
- No
- w/Supervisor:
- No
- w/Sequencer:
- No
- Voltage - Supply:
- 4.5V ~ 22V
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOP
AP2006SL-13 FAQ
1.How can I place an order for AP2006SL-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP2006SL-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP2006SL-13 reliable?
The price and inventory of AP2006SL-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP2006SL-13 is usually 5 days.
3.What payment methods are accepted for AP2006SL-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP2006SL-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP2006SL-13?
AP2006SL-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP2006SL-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP2006SL-13?
For technical support, including AP2006SL-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP2006SL-13 requirements.
6.How does Aetrix verify that AP2006SL-13 is sourced from the original manufacturer or authorized distributors?
All AP2006SL-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP2006SL-13 meets industry standards.
7.What is the process for return or replacement of AP2006SL-13?
All AP2006SL-13 units undergo pre-shipment inspection (PSI). If there is an issue with AP2006SL-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP2006SL-13 part is unused and in its original packaging.
Return procedure for AP2006SL-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP2006SL-13 Tags
-
TPS6521905RHBR
Texas Instruments
-
MIC3385YHL-TR
Microchip Technology
-
A4402ELPTR-T
Allegro MicroSystems
-
LM26480SQ-AA/NOPB
Texas Instruments
-
A4402KLPTR-T
Allegro MicroSystems
-
BD71847AMWV-E2
ROHM Semiconductor
-
ADP5040ACPZ-1-R7
Analog Devices Inc.
-
LT3048IDC#TRPBF
Analog Devices Inc.
-
ADP5037ACPZ-R7
Analog Devices Inc.
-
XRP7714ILB-F
MaxLinear, Inc.
-
LTC3260EDE#TRPBF
Analog Devices Inc.
-
LTC3260EMSE#PBF
Analog Devices Inc.
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
