My Inquiry
My Account
Diodes Incorporated AP2822CKBTR-G1
- Part No.:
- AP2822CKBTR-G1
- Manufacturer:
- Diodes Incorporated
- Package:
- SC-74A, SOT-753
- Datasheet:
-
AP2822CKBTR-G1.pdf
- Description:
- IC PWR SWITCH N-CHAN 1:1 SOT23-5
- Quantity:
- Payment:
- Shipping:
Inventory:2,511
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP2822CKBTR-G1 from Diodes Incorporated is a high-side power distribution switch with integrated N-channel MOSFET, charge pump, and protection circuitry. It delivers 1.0A continuous load current, features 85mΩ RDS(ON), operates from 2.7V to 5.5V, and includes soft-start, over-current fold-back, thermal shutdown, and UVLO - designed for USB bus-powered hubs and hot-plug power supplies.
For engineers reviewing the AP2822CKBTR-G1 datasheet, AP2822CKBTR-G1 pinout, AP2822CKBTR-G1 application, or AP2822CKBTR-G1 equivalent, key selection criteria include load current rating (1.0A), auto-discharge capability (enabled), active-high enable logic, SOT-23-5 package constraints, and FLAG fault signaling for USB controller interfacing.
Technical Context
The AP2822CKBTR-G1 implements a charge-pump–driven N-channel MOSFET gate driver to achieve low RDS(ON) without requiring an external high-side driver. Its over-current protection uses fold-back limiting with 1.1A–2.1A trip range (typ. 1.5A at VOUT = 4.0V) and deglitched FLAG output for reliable fault reporting.
UVLO ensures operation only above 2.2V (typ. 2.5V), while thermal shutdown activates at +150°C with +30°C hysteresis. The device supports both auto-discharge (via internal 100–200Ω pull-low resistor) and non-auto-discharge variants - AP2822CKBTR-G1 includes auto-discharge per ordering code "C" and "KB" package.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| RDS(ON) | 85mΩ typical at VIN = 5.0V, IOUT = 2.0A - meets USB voltage-drop requirements under full load. |
| Continuous Load Current | 1.0A (AP2822C variant) - rated for sustained delivery without thermal derating in +85°C ambient. |
| Supply Voltage Range | 2.7V to 5.5V - compatible with USB 2.0/3.0 VBUS, Li-ion battery, and 3.3V/5V system rails. |
| Enable Logic | Active-high EN input - simplifies direct interface with USB controller GPIOs without level-shifting. |
| FLAG Output | Open-drain, deglitched, active-low fault indicator - provides clean OCP/OTP signaling to microcontroller interrupt pins. |
| Auto-discharge | Enabled (internal 100–200Ω pull-low on VOUT) - ensures rapid output discharge after shutdown for safe hot-plug sequencing. |
| Quiescent Current | 68µA typical - minimizes standby power loss in always-on USB hub applications. |
Pinout & Package
SOT-23-5 (KB package), 2.9mm × 1.6mm footprint, 1.3mm height, lead-free and RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND | Power ground reference for internal circuits and thermal path - must be low-impedance connection to PCB ground plane. |
| 2 | FLAG | Open-drain fault flag output - requires external pull-up; asserts low during over-current or over-temperature events. |
| 3 | EN | Active-high enable input - drives internal gate driver; logic high ≥1.6V enables switch, low ≤1.0V disables. |
| 4 | VOUT | Switched output terminal - connects to downstream load (e.g., USB port VBUS); includes internal auto-discharge resistor. |
| 5 | VIN | Main power input - accepts 2.7–5.5V supply; feeds internal charge pump and protection comparators. |
Key Features
| Feature | Design Value |
|---|---|
| USB-compliant RDS(ON) | 85mΩ ensures <100mV drop at 1.0A - satisfies USB 2.0/3.0 VBUS regulation tolerance. |
| Soft-start control | Internal ramp limits inrush current during hot-plug - prevents VBUS droop and false USB enumeration failures. |
| Fold-back over-current protection | Reduces output current to ~0.7A during short-circuit - lowers power dissipation and avoids thermal runaway. |
| UVLO with hysteresis | 2.5V turn-on threshold with 0.2V hysteresis - prevents oscillation near brown-out conditions. |
| No reverse current flow | Blocks backfeed from VOUT to VIN when disabled - eliminates need for external blocking diode in battery-backed systems. |
Applications
| USB Bus-Powered Hub | Hot-Plug Peripheral Port |
|---|---|
Use Scenario: Power switching for downstream USB ports in self-powered or bus-powered hubs. IC Role / Device Role / Timing Role: High-side load switch controlling VBUS delivery to individual USB ports with fault isolation. Use Value: Enables per-port power cycling and OCP-triggered shutdown without affecting other ports' operation. |
Use Scenario: Safe insertion/removal of USB peripherals into embedded host systems. IC Role / Device Role / Timing Role: Hot-plug sequencer that manages inrush, monitors faults, and signals host controller via FLAG. Use Value: Prevents VBUS collapse and system reset during plug-in; FLAG signal allows firmware to disable port before hardware damage. |
| Notebook USB-C Docking Station | Battery-Charger Power Path |
Use Scenario: Isolating auxiliary USB-C ports in compact docking solutions with shared 5V rail. IC Role / Device Role / Timing Role: Load switch managing power delivery to USB-C DFP ports with strict USB PD compliance margins. Use Value: Maintains <100mV VBUS drop across switch under 1.0A load - critical for stable USB enumeration and data link integrity. |
Use Scenario: Controlling power path between charger IC and system rail in portable devices. IC Role / Device Role / Timing Role: High-side switch enabling/disabling charging path while preventing reverse current into charger. Use Value: Eliminates need for external Schottky diode; auto-discharge ensures fast VOUT decay post-shutdown for accurate battery voltage sensing. |
Availability
AP2822CKBTR-G1 is available at Aetrix Electronics and suitable for USB power management, hot-plug peripheral interfaces, and battery-charger power-path control requiring stable component supply and long-term industrial availability.
Supply support for AP2822CKBTR-G1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in power management, signal integrity, and protection solutions for consumer, computing, and industrial markets.
The AP2822 series belongs to Diodes' high-side load switch product line, engineered specifically for USB-compliant power distribution with integrated protection, soft-start, and fault reporting in space-constrained applications.
FAQ
What is the maximum continuous current rating for AP2822CKBTR-G1?
The AP2822CKBTR-G1 is configured as the "C" variant, rated for 1.0A continuous output current at VOUT = 4.0V and TA = +25°C. Derating applies above +85°C ambient; thermal shutdown activates at +150°C junction temperature to prevent damage.
Does AP2822CKBTR-G1 include auto-discharge functionality?
Yes. The "C" suffix indicates active-high enable with auto-discharge, and "KB" denotes the SOT-23-5 package variant that includes an internal 100–200Ω pull-down resistor on VOUT. This discharges the output capacitance within milliseconds after EN is deasserted.
How does the FLAG pin behave during over-current events?
The FLAG pin is an open-drain output that pulls low within 5–15ms (typ. 10ms) after over-current detection, remains asserted until fault clears, and includes deglitching to reject transient spikes. A pull-up resistor (typically 10kΩ to 3.3V/5V) is required for proper logic-level signaling to the host controller.
Is AP2822CKBTR-G1 recommended for new designs?
No. Per Diodes' official documentation (DS41399 Rev. 1–3), AP2822CKBTR-G1 is marked "NOT RECOMMENDED FOR NEW DESIGN" with no alternate part provided. It remains available for legacy support and existing production, but design-in for new projects is discouraged.
AP2822CKBTR-G1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- SC-74A, SOT-753
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Type:
- USB Switch
- Number of Outputs:
- 1
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- High Side
- Output Type:
- N-Channel
- Interface:
- On/Off
- Voltage - Load:
- 2.7V ~ 5.5V
- Voltage - Supply (Vcc/Vdd):
- Not Required
- Current - Output (Max):
- 1A
- Rds On (Typ):
- 85mOhm
- Input Type:
- Non-Inverting
- Features:
- Status Flag
- Fault Protection:
- Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-23-5
AP2822CKBTR-G1 FAQ
1.How can I place an order for AP2822CKBTR-G1 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP2822CKBTR-G1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP2822CKBTR-G1 reliable?
The price and inventory of AP2822CKBTR-G1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP2822CKBTR-G1 is usually 5 days.
3.What payment methods are accepted for AP2822CKBTR-G1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP2822CKBTR-G1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP2822CKBTR-G1?
AP2822CKBTR-G1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP2822CKBTR-G1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP2822CKBTR-G1?
For technical support, including AP2822CKBTR-G1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP2822CKBTR-G1 requirements.
6.How does Aetrix verify that AP2822CKBTR-G1 is sourced from the original manufacturer or authorized distributors?
All AP2822CKBTR-G1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP2822CKBTR-G1 meets industry standards.
7.What is the process for return or replacement of AP2822CKBTR-G1?
All AP2822CKBTR-G1 units undergo pre-shipment inspection (PSI). If there is an issue with AP2822CKBTR-G1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP2822CKBTR-G1 part is unused and in its original packaging.
Return procedure for AP2822CKBTR-G1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP2822CKBTR-G1 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
