My Inquiry
My Account
Diodes Incorporated AP2822GKETR-G1-01
- Part No.:
- AP2822GKETR-G1-01
- Manufacturer:
- Diodes Incorporated
- Package:
- SC-74A, SOT-753
- Datasheet:
-
AP2822GKETR-G1-01.pdf
- Description:
- IC PWR SWITCH N-CHAN 1:1 SOT23-5
- Quantity:
- Payment:
- Shipping:
Inventory:2,913
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP2822GKETR-G1-01 from BCD Semiconductor Manufacturing Limited is a high-side power distribution switch with active-high enable, 2.0A continuous current rating, 85mΩ RDS(ON), integrated over-current and thermal protection, and open-drain FLAG output for USB-compliant hot-plug power management in notebook and motherboard applications.
For engineers reviewing the AP2822GKETR-G1-01 datasheet, AP2822GKETR-G1-01 pinout, AP2822GKETR-G1-01 application, or AP2822GKETR-G1-01 equivalent, this device supports precise current-limited USB VBUS switching, fault reporting to host controllers, and stable operation across -40°C to +85°C ambient with 2.7V–5.5V supply range.
Technical Context
The AP2822GKETR-G1-01 integrates an N-channel MOSFET with charge pump gate drive, enabling low on-resistance (85mΩ typ.) while maintaining logic-level enable compatibility. Its current-limit threshold is fixed at 2.2A (min) to 3.2A (max) under 4.0V VOUT, with fold-back short-circuit response limiting peak fault current to 1.1A.
Functional blocks include UVLO (2.2–3.0V activation), soft-start (500µs turn-on time), deglitched open-drain FLAG output (5–15ms delay to fault assertion), and reverse-current blocking (<1.0µA leakage when disabled). Thermal shutdown triggers at 150°C with 30°C hysteresis.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| RDS(ON) | 85mΩ typ. at VIN=5V, IOUT=2.0A - meets USB voltage-drop requirements under full load. |
| Continuous Current | 2.0A - fixed rating per part number G variant; enables robust USB bus/hub power delivery. |
| Enable Logic | Active-high - EN pin asserts switch ON when driven ≥1.6V; compatible with standard GPIO outputs. |
| Supply Range | 2.7V–5.5V - supports single-supply operation from USB 5V or lower-voltage battery rails. |
| FLAG Output | Open-drain, deglitched, active-low - signals OCP/OTP faults to USB controller with 5–15ms latency. |
| Shutdown Current | 1.0µA max - minimizes standby power loss in portable systems during sleep states. |
| UVLO Threshold | 2.2–3.0V - prevents erratic switching during brown-out or cold-start conditions. |
Pinout & Package
AP2822GKETR-G1-01 is housed in a standard SOT-23-5 package (2.82mm × 2.92mm × 1.30mm), optimized for space-constrained USB power rail routing and thermal dissipation in high-density PCB layouts.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | FLAG | Open-drain fault indicator - requires external pull-up; sinks current during OCP/OTP events. |
| 2 | GND | Power ground reference - shared return path for internal protection circuits and MOSFET source. |
| 3 | EN | Active-high enable input - logic HIGH ≥1.6V turns on switch; LOW ≤1.0V disables output. |
| 4 | VIN | Main power input - connects to upstream 2.7–5.5V supply (e.g., USB VBUS or DC-DC output). |
| 5 | VOUT | Switched output - delivers regulated, current-limited power to downstream USB loads or hubs. |
Key Features
| Feature | Design Value |
|---|---|
| Low RDS(ON) | 85mΩ typ. reduces conduction loss and self-heating at 2.0A, enabling compact thermal design. |
| USB Compliance | Fully compliant with USB voltage drop and hot-plug timing specifications via soft-start and FLAG signaling. |
| No Reverse Current | Blocks backflow from VOUT to VIN when disabled - eliminates need for external blocking diodes. |
| Fold-back Short Protection | Limits short-circuit current to 1.1A (typ.) - sustains safe operation during sustained VOUT-to-GND faults. |
| Output Pull-Low Resistor | Integrated 100–200Ω discharge path - ensures rapid VOUT ramp-down after disable, preventing floating loads. |
Applications
| USB Bus-Powered Hubs | Notebook USB-C Power Delivery |
|---|---|
|
Use Scenario: Distributing clean, current-limited 5V power to multiple downstream USB peripherals from a single upstream port. IC Role / Device Role / Timing Role: High-side switch controlling VBUS rail with real-time fault detection and reporting to hub controller. Use Value: Prevents overcurrent damage to host port while enabling plug-and-play peripheral enumeration via FLAG-driven interrupt. |
Use Scenario: Managing auxiliary 5V power paths in dual-role USB-C ports where VBUS must be switched independently of CC logic. IC Role / Device Role / Timing Role: Hot-plug power switch with 500µs controlled turn-on and deglitched fault flag for system firmware coordination. Use Value: Eliminates inrush-induced voltage sag and provides deterministic fault isolation without requiring additional sense resistors or comparators. |
| Motherboard USB Port Protection | Battery-Charger Load Switching |
|
Use Scenario: Isolating individual USB ports on desktop/laptop motherboards to prevent cascading failures during cable shorts. IC Role / Device Role / Timing Role: Per-port power switch with thermal shutdown and UVLO, interfacing directly with EC or BMC. Use Value: Enables per-port reset via EN pin and centralized fault monitoring via shared FLAG lines, reducing BOM count vs. discrete solutions. |
Use Scenario: Enabling/disabling charging circuitry powered from a shared 5V rail during battery insertion/removal or thermal throttling. IC Role / Device Role / Timing Role: Load switch with fold-back current limiting and reverse-current blocking to protect charger IC inputs. Use Value: Prevents backfeed into charger IC during battery disconnect and limits fault energy during accidental VOUT short to chassis ground. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-side power switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TI TPS22965DRLR | 2.5A rated, 44mΩ RDS(ON), active-high enable, but lacks integrated FLAG output and fold-back short protection. | Requires external fault monitoring circuitry; better suited for non-USB applications needing ultra-low RDS(ON). | Select when lowest conduction loss is critical and system-level fault handling is already implemented. |
| ON Semi NIS5132MN | 2.0A rated, 90mΩ RDS(ON), active-high enable, includes FLAG but no UVLO or soft-start; higher shutdown current (5µA). | Less robust for USB hot-plug due to missing soft-start and tighter UVLO hysteresis; suitable for simpler 5V-only systems. | Select when FLAG reporting is required but thermal margin and inrush control are secondary concerns. |
Compared with TPS22965DRLR and NIS5132MN, AP2822GKETR-G1-01 uniquely combines USB-compliant soft-start, deglitched FLAG, fold-back short protection, and sub-1µA shutdown current in SOT-23-5-making it optimal for cost-sensitive, space-constrained USB power management where integrated fault intelligence is essential.
Availability
AP2822GKETR-G1-01 is available at Aetrix Electronics and suitable for USB bus-powered hubs, notebook motherboard USB port protection, and battery-charger load switching requiring stable component supply and RoHS-compliant green packaging.
Supply support for AP2822GKETR-G1-01 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
BCD Semiconductor Manufacturing Limited is a China-based analog and power IC designer specializing in high-efficiency, high-reliability semiconductor solutions for consumer, computing, and industrial markets.
The AP2822 product line targets USB-compliant power distribution with integrated protection, delivering compact, cost-effective alternatives to discrete MOSFET+controller solutions in portable and embedded systems.
FAQ
What is the maximum continuous current rating for AP2822GKETR-G1-01?
The AP2822GKETR-G1-01 is rated for 2.0A continuous output current, with a guaranteed current-limit threshold of 2.2A (min) to 3.2A (max) at VOUT=4.0V. This rating is fixed by the G variant designation and validated across -40°C to +85°C ambient temperature.
Does AP2822GKETR-G1-01 support reverse-current blocking?
Yes - when disabled, the device blocks reverse current flow from VOUT to VIN, with leakage limited to 0.1–1.0µA. This eliminates the need for external blocking diodes in battery-backed or multi-rail systems where backfeed could disrupt upstream supplies.
How does the FLAG output behave during over-current events?
The FLAG pin asserts low within 5–15ms of over-current detection, remains low until the fault clears and the device recovers, and is deglitched to reject transient noise. It requires an external pull-up resistor and interfaces directly with microcontroller GPIO interrupt inputs.
Is AP2822GKETR-G1-01 compatible with 3.3V logic enable signals?
Yes - the EN pin accepts logic-high signals as low as 1.6V (min), making it fully compatible with 3.3V GPIO outputs. The enable threshold is specified from 0–1.0V (low) and 1.6–5.5V (high), ensuring reliable turn-on with standard CMOS logic levels.
AP2822GKETR-G1-01 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- SC-74A, SOT-753
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Type:
- USB Switch
- Number of Outputs:
- 1
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- High Side
- Output Type:
- N-Channel
- Interface:
- On/Off
- Voltage - Load:
- 2.7V ~ 5.5V
- Voltage - Supply (Vcc/Vdd):
- Not Required
- Current - Output (Max):
- 2A
- Rds On (Typ):
- 85mOhm
- Input Type:
- Non-Inverting
- Features:
- Status Flag
- Fault Protection:
- Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-23-5
AP2822GKETR-G1-01 FAQ
1.How can I place an order for AP2822GKETR-G1-01 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP2822GKETR-G1-01 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP2822GKETR-G1-01 reliable?
The price and inventory of AP2822GKETR-G1-01 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP2822GKETR-G1-01 is usually 5 days.
3.What payment methods are accepted for AP2822GKETR-G1-01?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP2822GKETR-G1-01 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP2822GKETR-G1-01?
AP2822GKETR-G1-01 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP2822GKETR-G1-01 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP2822GKETR-G1-01?
For technical support, including AP2822GKETR-G1-01 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP2822GKETR-G1-01 requirements.
6.How does Aetrix verify that AP2822GKETR-G1-01 is sourced from the original manufacturer or authorized distributors?
All AP2822GKETR-G1-01 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP2822GKETR-G1-01 meets industry standards.
7.What is the process for return or replacement of AP2822GKETR-G1-01?
All AP2822GKETR-G1-01 units undergo pre-shipment inspection (PSI). If there is an issue with AP2822GKETR-G1-01, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP2822GKETR-G1-01 part is unused and in its original packaging.
Return procedure for AP2822GKETR-G1-01:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP2822GKETR-G1-01 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
