My Inquiry
My Account
Diodes Incorporated AP62200Z6-7
- Part No.:
- AP62200Z6-7
- Manufacturer:
- Diodes Incorporated
- Package:
- SOT-563, SOT-666
- Datasheet:
-
AP62200Z6-7.pdf
- Description:
- IC REG BUCK ADJ 2A SOT563
- Quantity:
- Payment:
- Shipping:
Inventory:14,925
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP62200Z6-7 from Diodes Incorporated is a 2A synchronous buck converter with 4.2V–18V input range, integrated 90mΩ high-side and 65mΩ low-side MOSFETs, 750kHz switching frequency, 135μA quiescent current in PFM mode, and 0.8V ±1% reference voltage - designed for point-of-load regulation in FPGA/DSP power supplies and consumer electronics.
For engineers reviewing the AP62200Z6-7 datasheet, AP62200Z6-7 pinout, AP62200Z6-7 application, or AP62200Z6-7 equivalent, key selection criteria include its COT control architecture for fast transient response, proprietary gate driver for EMI reduction, thermal shutdown at +160°C, and TSOT26 package compatibility with space-constrained PCB layouts.
Technical Context
This device implements Constant On-Time (COT) control to deliver pseudo-fixed-frequency operation across input voltage variations while ensuring rapid load transient recovery and minimal output voltage ripple. Its one-shot on-time computation dynamically adjusts tON based on VIN/VOUT ratio and nominal fSW, enabling stable loop behavior without external compensation.
The proprietary gate driver suppresses switching node ringing by optimizing MOSFET turn-on/turn-off timing without degrading edge speed, directly reducing high-frequency radiated EMI. Protection includes cycle-by-cycle valley current limiting (2.8A typ), UVLO with 3.9V rising threshold, and thermal shutdown with 20°C hysteresis.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VIN Range | 4.2V to 18V DC - supports wide-input industrial and consumer bus rails including 5V, 12V, and 15V systems. |
| IOUT Max | 2A continuous - sufficient for powering FPGA core logic, DSP I/O banks, or ASIC subsystems. |
| fSW | 750kHz typical at VIN=12V, VOUT=5V - enables compact LC filter design with 4.7μH inductor and 2×22μF output capacitance. |
| IQ (PFM) | 135μA typical - extends battery life in always-on subsystems and low-power standby modes. |
| VFB Ref | 0.800V ±1% at +25°C - sets precise output voltage via external resistor divider; supports 0.8V–7V programmable VOUT. |
| RDS(ON) HS/LS | 90mΩ / 65mΩ - minimizes conduction loss and improves full-load efficiency up to 90% at 1A. |
| tSS | 2.5ms soft-start - prevents output overshoot and limits inrush current during power-up sequencing. |
Pinout & Package
AP62200Z6-7 is packaged in TSOT26 (Standard), a 6-pin, 1.7mm × 2.9mm, 0.95mm height surface-mount package with exposed thermal pad for enhanced thermal dissipation (θJA = 70°C/W on 2-layer FR-4).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VIN (Pin 3) | Power Input | Supplies IC bias and high-side MOSFET gate drive; requires ≥10μF ceramic bypass capacitor to GND for noise suppression. |
| SW (Pin 2) | Switching Node | Connects to inductor input; carries high di/dt current - layout must minimize loop area to reduce EMI. |
| GND (Pin 1) | Power Ground | Primary return path for high-current switching and IC ground; must be tied to thermal pad and low-impedance plane. |
| BST (Pin 6) | Bootstrap Supply | Drives high-side MOSFET gate; requires 100nF ceramic capacitor between BST and SW for charge replenishment. |
| EN (Pin 5) | Enable Control | Digital input with 1.2V logic-high threshold; floating EN enables auto-start via internal 1.5μA pull-up current source. |
| FB (Pin 4) | Feedback Sense | Monitors resistive divider output; regulates VOUT by comparing against 0.8V internal reference. |
Key Features
| Feature | Design Value |
|---|---|
| Constant On-Time (COT) Control | Enables <10μs load transient recovery and eliminates need for external compensation network. |
| Proprietary Ringing-Free Gate Driver | Reduces high-frequency radiated EMI without increasing MOSFET switching losses or compromising tON/tOFF. |
| Low-IQ PFM Mode | 135μA quiescent current at light load preserves battery runtime in always-on applications like remote controls or IoT sensors. |
| Integrated Protection Suite | Includes undervoltage lockout (UVLO), cycle-by-cycle valley current limit, and thermal shutdown with 20°C hysteresis. |
| Lead-Free & Halogen-Free | Fully RoHS 3 compliant (<900ppm Br/Cl, <1000ppm Sb); qualified for industrial temperature range (−40°C to +125°C). |
Applications
| FPGA Core Power Supply | Distributed 5V Bus Regulation |
|---|---|
|
Use Scenario: Regulating clean, low-noise 1.2V core voltage for Xilinx Artix-7 or Intel Cyclone V FPGA banks under dynamic load conditions. IC Role / Device Role / Timing Role: Primary synchronous buck regulator implementing COT control for sub-10μs transient response to logic switching events. Use Value: Maintains VCCINT within ±2% tolerance during 0–2A step loads, minimizing timing margin erosion and logic errors. |
Use Scenario: Stepping down 12V system rail to stable 5V for USB peripherals, display controllers, and sensor interfaces in smart TVs. IC Role / Device Role / Timing Role: Point-of-load DC-DC converter with integrated MOSFETs and EMI-optimized switching node. Use Value: Achieves >88% efficiency at 1A and meets CISPR-32 Class B radiated emissions without added shielding or ferrites. |
| Home Audio DSP Power | White Goods MCU Subsystem |
|
Use Scenario: Supplying 3.3V to TI TMS320C55x DSP in premium soundbars with strict acoustic noise requirements. IC Role / Device Role / Timing Role: Low-ripple, low-EMI buck converter operating in PFM at idle and PWM under audio processing load. Use Value: Delivers <20mVPP output ripple at 50mA and <50mVPP at 2A, eliminating audible switching artifacts. |
Use Scenario: Powering 32-bit ARM Cortex-M4 MCU and CAN transceiver in refrigerator main control board with extended thermal cycles. IC Role / Device Role / Timing Role: Industrial-grade buck regulator with −40°C to +125°C junction rating and robust thermal shutdown. Use Value: Survives 10,000+ thermal cycles in condenser compartment; maintains regulation during compressor startup surges. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar synchronous buck converter applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MP2451DT-LF-Z (Monolithic Power) | Fixed 2.2MHz fSW, 0.8V ref, 2A rating, but higher IQ (260μA) and no PFM mode. | Limited light-load efficiency (<75% @5mA); less suitable for battery-backed standby rails. | Prefer AP62200Z6-7 when >84% light-load efficiency and EMI-sensitive layouts are required. |
| RT7297BGS (Richtek) | Adjustable fSW (300–2000kHz), 0.6V ref, 2A, but lacks proprietary EMI suppression and has 250μA IQ. | Requires external EMI filters in Class B environments; larger solution size due to external compensation. | Choose AP62200Z6-7 for drop-in replacement where board space, thermal performance, and EMI compliance are critical. |
Compared with MP2451DT-LF-Z and RT7297BGS, AP62200Z6-7 delivers superior light-load efficiency via PFM, lower EMI through optimized gate drive, and tighter thermal management with 20°C shutdown hysteresis - making it optimal for compact, thermally constrained, and emission-sensitive designs.
Availability
AP62200Z6-7 is available at Aetrix Electronics and suitable for FPGA power supplies, distributed 5V bus regulation, and home audio DSP applications requiring stable component supply, long-term lifecycle support, and consistent parametric performance across production batches.
Supply support for AP62200Z6-7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global semiconductor company specializing in discrete, analog, and mixed-signal solutions, with manufacturing certified to IATF 16949 and product definitions aligned to AEC-Q200 for industrial and automotive reliability.
AP62200Z6-7 belongs to Diodes' AP62xxx family of EMI-optimized synchronous buck converters, engineered specifically for space-constrained, noise-sensitive consumer and industrial point-of-load applications demanding high efficiency across light-to-heavy load ranges.
FAQ
What is the recommended input capacitor for AP62200Z6-7?
A minimum 10μF X5R/X7R ceramic capacitor placed close to VIN and GND pins is required to suppress high-frequency switching noise and stabilize input voltage during load transients. For improved ripple rejection and hold-up time, pair it with a 22μF–47μF bulk tantalum or aluminum polymer capacitor.
Can AP62200Z6-7 operate with an output voltage below 0.8V?
No - the internal reference voltage is fixed at 0.800V ±1%, and the FB pin senses the resistive divider output. Setting VOUT below 0.8V would violate regulation accuracy and is outside the specified operating range per datasheet Section 6 (Recommended Operating Conditions).
How does the EN pin behave when left unconnected?
When EN is floating, an internal 1.5μA pull-up current source charges the pin to the 1.2V logic-high threshold, enabling automatic startup after power-up. No external pull-up is needed, though a small capacitor (e.g., 1nF) can be added to delay startup for power-rail sequencing.
Is AP62200Z6-7 qualified for automotive applications?
AP62200Z6-7 itself is not AEC-Q100 qualified; however, Diodes offers automotive-grade variants (e.g., AP62200T) with tighter reference voltage (0.763V) and qualification support. For automotive use, contact Diodes or Aetrix for PPAP-capable, IATF 16949-manufactured alternatives.
AP62200Z6-7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- SOT-563, SOT-666
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Function:
- Step-Down
- Output Configuration:
- Positive
- Topology:
- Buck
- Output Type:
- Adjustable
- Number of Outputs:
- 1
- Voltage - Input (Min):
- 4.2V
- Voltage - Input (Max):
- 18V
- Voltage - Output (Min/Fixed):
- 0.8V
- Voltage - Output (Max):
- 7V
- Current - Output:
- 2A
- Frequency - Switching:
- 740kHz
- Synchronous Rectifier:
- Yes
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-563
AP62200Z6-7 FAQ
1.How can I place an order for AP62200Z6-7 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP62200Z6-7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP62200Z6-7 reliable?
The price and inventory of AP62200Z6-7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP62200Z6-7 is usually 5 days.
3.What payment methods are accepted for AP62200Z6-7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP62200Z6-7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP62200Z6-7?
AP62200Z6-7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP62200Z6-7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP62200Z6-7?
For technical support, including AP62200Z6-7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP62200Z6-7 requirements.
6.How does Aetrix verify that AP62200Z6-7 is sourced from the original manufacturer or authorized distributors?
All AP62200Z6-7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP62200Z6-7 meets industry standards.
7.What is the process for return or replacement of AP62200Z6-7?
All AP62200Z6-7 units undergo pre-shipment inspection (PSI). If there is an issue with AP62200Z6-7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP62200Z6-7 part is unused and in its original packaging.
Return procedure for AP62200Z6-7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP62200Z6-7 Tags
-
TPS562201DDCR
Texas Instruments
-
MC34063ABD-TR
STMicroelectronics
-
TPS561201DDCR
Texas Instruments
-
MC33063ADR
Texas Instruments
-
MC34063ADR
Texas Instruments
-
TPS560200DBVR
Texas Instruments
-
AP3012KTR-G1
Diodes Incorporated
-
TLV61048DBVR
Texas Instruments
-
AZ34063UMTR-G1
Diodes Incorporated
-
TPS562200DDCR
Texas Instruments
-
AP62300TWU-7
Diodes Incorporated
-
MC34063EBD-TR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
