Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Name*
Company*
Email Address*
Phone/WhatsApp
Part Number*
Quantity*
Message
Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Name*
Company*
Email Address*
Phone/WhatsApp
Upload My List
Message

Diodes Incorporated AP64350SP-EVM

Part No.:
AP64350SP-EVM
Manufacturer:
Diodes Incorporated
Category:
DC/DC & AC/DC (Off-Line) SMPS Evaluation Boards
Package:
Datasheet:
AetrixAP64350SP-EVM.pdf
Description:
EVAL BOARD FOR AP64350
Quantity:
Payment:
Payment
Shipping:
Shipping

Inventory:4,976

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Part Number
Quantity*
Price
Name*
Company
Email*
Comments

Product details

Overview

AP64350SP-EVM from Diodes Incorporated is an evaluation board for the AP64350 40V, 3.5A synchronous buck converter featuring programmable switching frequency (100kHz–2.2MHz), 22µA quiescent current in PFM mode, and integrated 75mΩ/45mΩ MOSFETs. It supports output voltages from 0.8V to 39V and implements Frequency Spread Spectrum (±6% jitter) and proprietary gate drive for EMI reduction. The board enables rapid validation of 5V/12V/24V distributed power bus designs.

For engineers reviewing the AP64350SP-EVM datasheet, AP64350SP-EVM pinout, AP64350SP-EVM application, or AP64350SP-EVM equivalent, this evaluation platform provides direct access to VIN, VOUT, EN, SW, and feedback nodes via test points; supports adjustable output voltage via resistor dividers; and delivers verified efficiency, load transient, and short-circuit protection performance per Diodes Inc. Rev. 1 documentation.

Technical Context

The AP64350SP-EVM implements peak current mode control with internal compensation, enabling stable regulation across 3.8V–40V input and 0.8V–39V output ranges. Its SO-8EP-mounted AP64350 IC integrates high- and low-side MOSFETs and supports external clock synchronization within 100kHz–2.2MHz.

EMI mitigation is achieved through dual mechanisms: Frequency Spread Spectrum (FSS) with ±6% switching frequency jitter and a proprietary gate driver that suppresses switching-node ringing without degrading turn-on/turn-off timing-directly reducing high-frequency radiated noise.

Key Specifications

ParameterValue and Actual Design Meaning
Input Voltage Range3.8V to 40V DC - supports 5V, 12V, and 24V industrial bus rails with headroom for transients
Output Current3.5A continuous - validated at full load with thermal shutdown protection active
Quiescent Current22µA in PFM mode - enables >90% efficiency at light loads in battery-backed systems
Switching FrequencyProgrammable 100kHz–2.2MHz - allows optimization for size (high-freq) or EMI (low-freq)
Reference Voltage0.8V ±1% - ensures precise output regulation across temperature and line variations
FSS Jitter±6% frequency modulation - spreads spectral energy to lower peak EMI emissions
Protection FeaturesUVLO, OVP, cycle-by-cycle current limit, thermal shutdown - prevents fault propagation in fielded systems

Availability

AP64350SP-EVM is available at Aetrix Electronics and suitable for industrial embedded developers, optical networking equipment designers, and cordless power tool manufacturers requiring stable component supply, fast prototyping turnaround, and production-ready reference design validation.

Supply support for AP64350SP-EVM includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in power management, signal integrity, and protection solutions for industrial, consumer, and communications markets.

The AP64350 product line targets high-efficiency, low-EMI point-of-load conversion in space-constrained applications such as network systems and white goods, with emphasis on wide-input-voltage operation and ultralow IQ.

FAQ

What input voltage range is supported by the AP64350SP-EVM?

The AP64350SP-EVM supports input voltages from 3.8V to 40V DC, validated per Diodes Inc. Rev. 1 documentation. It operates reliably at 12V nominal input (per Quick Start Guide) and handles 45V transient spikes for up to 400ms, making it suitable for automotive and industrial 24V bus applications with surge margin.

How is output voltage adjusted on the AP64350SP-EVM?

Output voltage is set using an external resistor divider on the FB pin. Table 1 in the documentation specifies R1/R2 values for common outputs: e.g., 115kΩ/22.1kΩ yields 5.0V ±1%. The board includes solder pads and jumpers to accommodate different resistor configurations without PCB modification.

Does the AP64350SP-EVM support external clock synchronization?

Yes-the AP64350 IC on the EVM supports external clock synchronization via the RT/CLK pin, accepting frequencies from 100kHz to 2.2MHz. This allows deterministic switching alignment with system clocks to avoid beat frequencies and simplify EMI filtering in synchronized multi-rail power systems.

What protection features are demonstrated on the AP64350SP-EVM?

The EVM demonstrates undervoltage lockout (UVLO), output overvoltage protection (OVP), cycle-by-cycle peak current limiting, and thermal shutdown-each verified in the "Typical Performance Characteristics" section (Figures 6–9). Short-circuit protection recovery is observable under 3.5A load conditions per Figure 9.

AP64350SP-EVM Specifications

Product attributes
Attribute value
Manufacturer:
Diodes Incorporated
Series:
-
Packaging:
Box
Product Status:
Active
Main Purpose:
DC/DC, Step Down
Outputs and Type:
1 Non-Isolated Output
Voltage - Output:
-
Current - Output:
5V
Voltage - Input:
3.5A
Regulator Topology:
3.8V ~ 40V
Frequency - Switching:
Buck
Contents:
-
Utilized IC / Part:
Board(s)
Power - Output:
AP64350

AP64350SP-EVM FAQ

1.How can I place an order for AP64350SP-EVM through Aetrix?

Please submit a Request for Quotation (RFQ) for AP64350SP-EVM on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for AP64350SP-EVM reliable?

The price and inventory of AP64350SP-EVM are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP64350SP-EVM is usually 5 days.

3.What payment methods are accepted for AP64350SP-EVM?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP64350SP-EVM transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for AP64350SP-EVM?

AP64350SP-EVM orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your AP64350SP-EVM order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for AP64350SP-EVM?

For technical support, including AP64350SP-EVM datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP64350SP-EVM requirements.

6.How does Aetrix verify that AP64350SP-EVM is sourced from the original manufacturer or authorized distributors?

All AP64350SP-EVM products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP64350SP-EVM meets industry standards.

7.What is the process for return or replacement of AP64350SP-EVM?

All AP64350SP-EVM units undergo pre-shipment inspection (PSI). If there is an issue with AP64350SP-EVM, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The AP64350SP-EVM part is unused and in its original packaging.

Return procedure for AP64350SP-EVM:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

AP64350SP-EVM Tags

  • AP64350SP-EVM
  • AP64350SP-EVM PDF
  • AP64350SP-EVM Datasheet
  • AP64350SP-EVM Specifications
  • AP64350SP-EVM Images
  • Diodes Incorporated
  • Diodes Incorporated AP64350SP-EVM
  • Buy AP64350SP-EVM
  • AP64350SP-EVM Price
  • AP64350SP-EVM Distributor
  • AP64350SP-EVM Supplier
  • AP64350SP-EVM Wholesale
Related Products
DFR0571
DFR0571

DFRobot

DFR0379
DFR0379

DFRobot

DFR0205
DFR0205

DFRobot

1385
1385

Adafruit Industries LLC

COM-15208
COM-15208

SparkFun Electronics

1944
1944

Adafruit Industries LLC

2465
2465

Adafruit Industries LLC

DC2468A
DC2468A

Analog Devices Inc.

DC2841A
DC2841A

Analog Devices Inc.

TPS552892EVM-111
TPS552892EVM-111

Texas Instruments

TPS55289EVM-093
TPS55289EVM-093

Texas Instruments

EPC9158
EPC9158

EPC

Tech Hub

Search

Search

PRODUCT

PRODUCT

PHONE

PHONE

USER

USER