My Inquiry
My Account
Diodes Incorporated AP65200MP-13
- Part No.:
- AP65200MP-13
- Manufacturer:
- Diodes Incorporated
- Package:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
- Datasheet:
-
AP65200MP-13.pdf
- Description:
- IC REG BUCK ADJ 2A 8MSOP
- Quantity:
- Payment:
- Shipping:
Inventory:3,310
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP65200MP-13 from Diodes Incorporated is a 340 kHz external-compensated synchronous DC/DC buck converter with integrated 130 mΩ high- and low-side MOSFETs, delivering up to 2 A continuous output current at up to 95% efficiency across 4.7–18 V input range, and featuring automated light-load efficiency improvement for gaming consoles and FPGA power supplies.
For engineers reviewing the AP65200MP-13 datasheet, AP65200MP-13 pinout, AP65200MP-13 application, or AP65200MP-13 equivalent, this device supports adjustable output (0.925–16 V), programmable soft-start, current-mode control for fast transient response, and thermal/overcurrent protection in SO-8EP, MSOP-8EP, and U-DFN2626-10 packages.
Technical Context
The AP65200MP-13 implements fixed-frequency current-mode control with 340 kHz oscillator and internal slope compensation to suppress subharmonic oscillation. Its error amplifier (800 V/V gain, 1000 µA/V transconductance) interfaces externally via COMP pin for loop stabilization using RC network.
It integrates cycle-by-cycle overcurrent protection triggered by high-side MOSFET voltage drop sensing, with fold-back frequency reduction to 102 kHz and 70% current limit when FB drops to 0.3 V. Thermal shutdown activates at 160°C with 40°C hysteresis.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VIN Range | 4.7 V to 18 V - supports wide-input industrial and consumer power rails including 5 V, 12 V, and 18 V supplies. |
| Continuous Output Current | 2 A - delivers stable regulated output under sustained load without derating at +85°C ambient. |
| Switching Frequency | 340 kHz - enables compact magnetics while balancing EMI and efficiency; typical variation ±12% over temperature. |
| Feedback Reference Voltage | 0.925 V ±25 mV - sets output voltage accuracy; used with external resistor divider to configure 0.925–16 V outputs. |
| RDS(ON) (HS & LS) | 130 mΩ each - minimizes conduction loss and enables >95% peak efficiency at 3.3 V/2 A with 12 V input. |
| Soft-Start Current | 6 µA - charges external capacitor to ramp reference from 0 V to 0.925 V; 0.1 µF yields 15 ms startup time. |
| Thermal Shutdown Threshold | 160°C - protects die during overload or poor PCB thermal design; auto-recovery at ~120°C. |
Pinout & Package
AP65200MP-13 is supplied in a RoHS-compliant SO-8EP package with exposed thermal pad (soldered to GND), offering θJA = 40°C/W on 2″×2″ 2 oz copper PCB with thermal vias.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| BS (Pin 1) | Bootstrap Supply Input | Provides gate drive voltage for high-side MOSFET; requires ≥0.01 µF capacitor from SW to BS. |
| IN (Pin 2) | Main Power Input | Accepts 4.7–18 V supply; must be bypassed with bulk capacitor to suppress input ripple and noise. |
| SW (Pin 3) | Switching Node Output | Connects to inductor input; carries high di/dt switching waveform; critical for EMI and layout integrity. |
| GND (Pin 4) | Power Ground | Primary return path for high-current switch node and IC ground; must be low-impedance and tied to thermal pad. |
| FB (Pin 5) | Feedback Input | Senses output voltage via resistive divider; regulates output to 0.925 V reference; sensitive to noise coupling. |
| COMP (Pin 6) | Compensation Node | Output of error amplifier; connects to external RC network to set pole-zero placement for loop stability. |
| EN (Pin 7) | Enable Control | Digital input with 0.7–0.8 V rising threshold and 2.2–2.5 V lockout; 100 kΩ pull-up enables automatic startup. |
| SS (Pin 8) | Soft-Start Control | Accepts external capacitor to linearly ramp reference voltage; floating disables soft-start. |
Key Features
| Feature | Design Value |
|---|---|
| Automated Light-Load Efficiency Improvement | Switches to discontinuous conduction mode below critical load to reduce switching losses and maintain >85% efficiency at 10 mA. |
| Integrated 130 mΩ HS/LS MOSFETs | Eliminates external power switches and reduces BOM count; enables compact 2 A solution with minimal external components. |
| External Programmable Soft-Start | 6 µA internal current source allows precise control of output voltage ramp rate via capacitor value (e.g., 0.1 µF = 15 ms). |
| Current-Mode Control with Slope Compensation | Ensures stable operation across duty cycles >50%; provides inherent line/load regulation and fast transient response (<10 µs). |
| Comprehensive Protection Suite | Includes cycle-by-cycle OCP (4.4 A HS / 0.9 A LS), thermal shutdown (160°C), UVLO (4.05 V), and overvoltage lockout (1.1 V FB threshold). |
Applications
| Gaming Console Power Rails | FPGA Core Voltage Supply |
|---|---|
|
Use Scenario: Powers GPU memory and I/O banks in compact gaming hardware requiring tight voltage tolerance and dynamic load handling. IC Role / Device Role / Timing Role: Primary synchronous buck regulator delivering 1.2 V/2 A with <±1% regulation and <50 mV load transient deviation. Use Value: Integrated MOSFETs and current-mode control enable rapid response to burst-mode GPU loads while maintaining efficiency above 90% at 500 mA–2 A. |
Use Scenario: Supplies configurable core voltage (e.g., 1.0–1.2 V) to Xilinx Artix-7 or Intel Cyclone V FPGAs during configuration and active operation. IC Role / Device Role / Timing Role: Adjustable-output buck converter with soft-start and precision feedback enabling safe FPGA power-up sequencing. Use Value: 0.925 V reference and ±25 mV tolerance ensure compliance with FPGA core voltage specs; programmable soft-start prevents configuration errors due to overshoot. |
| Flat Panel TV Backlight Driver Support | Distributed Power for Network Systems |
|
Use Scenario: Generates auxiliary 3.3 V or 5 V rail for LED driver ICs and microcontrollers in smart TV mainboards. IC Role / Device Role / Timing Role: Secondary buck converter operating from 12 V intermediate bus; handles 0.5–2 A loads with light-load optimization. Use Value: Automated light-load mode maintains >87% efficiency at standby (50 mA), reducing no-load power consumption and meeting Energy Star requirements. |
Use Scenario: Provides isolated 5 V or 12 V point-of-load (POL) conversion for Ethernet PHYs, PoE controllers, and management MCUs in enterprise switches. IC Role / Device Role / Timing Role: High-efficiency POL regulator supporting hot-swap and remote monitoring via EN and FB pins. Use Value: Enable pin interface allows centralized power sequencing; thermal protection ensures reliability in densely packed switch chassis with limited airflow. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar synchronous buck regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MP2315DJ-LF-P (Monolithic Power) | 3 A rating, 500 kHz fSW, 80 mΩ RDS(ON), no external COMP pin - uses internal compensation. | Higher current and frequency suit smaller inductors but lacks external loop tuning flexibility for noisy environments. | Select when board space is constrained and loop stability is verified across all load/line conditions without adjustment. |
| TPS54202HDDCR (Texas Instruments) | 2 A, 400–2200 kHz adjustable fSW, 120 mΩ RDS(ON), integrated soft-start and Eco-mode for light loads. | Wider frequency range enables EMI spread-spectrum tuning; Eco-mode differs from AP65200's algorithm in transition behavior and minimum off-time. | Select when EMI compliance requires frequency dithering or when tighter light-load regulation (<±2%) is required. |
Compared with MP2315DJ-LF-P and TPS54202HDDCR, the AP65200MP-13 offers external compensation for robust loop tuning in variable PCB layouts, deterministic 340 kHz switching for predictable filter design, and proven light-load behavior in consumer audio and display systems.
Availability
AP65200MP-13 is available at Aetrix Electronics and suitable for gaming consoles, flat-panel TVs, and FPGA power supplies requiring stable component supply, long-term manufacturability, and RoHS-compliant packaging.
Supply support for AP65200MP-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in power management, signal integrity, and protection solutions for high-volume consumer and industrial markets.
The AP65200 belongs to Diodes' high-efficiency synchronous buck converter product line, designed specifically for cost-sensitive, space-constrained consumer electronics requiring reliable 2 A POL conversion with minimal external components.
FAQ
What is the recommended input capacitor for AP65200MP-13 at 12 V input and 2 A load?
A minimum 10 µF ceramic capacitor placed close to the IN and GND pins is required; Diodes recommends two 22 µF X5R/X7R MLCCs in parallel for optimal high-frequency decoupling and ripple suppression. Total effective capacitance should exceed 40 µF with ESR <10 mΩ to prevent input voltage sag during load transients.
How does the AP65200MP-13 enter and exit light-load mode?
The IC automatically detects output current via internal current sense circuitry and transitions to light-load mode when load falls below ~200 mA. It exits this mode when current exceeds the same threshold. No external control is needed-mode switching is transparent and maintains regulation within ±1.5% across the full load range.
Can the AP65200MP-13 operate with an output voltage lower than 0.925 V?
No. The internal reference is fixed at 0.925 V, and the feedback comparator is designed to regulate only at or above this voltage. Attempting to set VOUT < 0.925 V results in unregulated operation and potential instability; the minimum valid output is 0.925 V with R2 = 0 Ω and R1 omitted (not recommended for production).
What thermal design guidance applies to the SO-8EP package of AP65200MP-13?
The exposed thermal pad must be soldered to a minimum 80% copper area connected to a solid GND plane with ≥4 thermal vias (0.3 mm diameter, spaced ≤1 mm apart). On a 2″×2″ 2 oz FR-4 board, this achieves θJA = 40°C/W; insufficient pad area or missing vias increase junction temperature by >30°C at full load.
AP65200MP-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Function:
- Step-Down
- Output Configuration:
- Positive
- Topology:
- Buck
- Output Type:
- Adjustable
- Number of Outputs:
- 1
- Voltage - Input (Min):
- 4.7V
- Voltage - Input (Max):
- 18V
- Voltage - Output (Min/Fixed):
- 0.925V
- Voltage - Output (Max):
- 16V
- Current - Output:
- 2A
- Frequency - Switching:
- 340kHz
- Synchronous Rectifier:
- Yes
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-MSOP-EP
AP65200MP-13 FAQ
1.How can I place an order for AP65200MP-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP65200MP-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP65200MP-13 reliable?
The price and inventory of AP65200MP-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP65200MP-13 is usually 5 days.
3.What payment methods are accepted for AP65200MP-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP65200MP-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP65200MP-13?
AP65200MP-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP65200MP-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP65200MP-13?
For technical support, including AP65200MP-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP65200MP-13 requirements.
6.How does Aetrix verify that AP65200MP-13 is sourced from the original manufacturer or authorized distributors?
All AP65200MP-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP65200MP-13 meets industry standards.
7.What is the process for return or replacement of AP65200MP-13?
All AP65200MP-13 units undergo pre-shipment inspection (PSI). If there is an issue with AP65200MP-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP65200MP-13 part is unused and in its original packaging.
Return procedure for AP65200MP-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP65200MP-13 Tags
-
TPS562201DDCR
Texas Instruments
-
MC34063ABD-TR
STMicroelectronics
-
TPS561201DDCR
Texas Instruments
-
MC33063ADR
Texas Instruments
-
MC34063ADR
Texas Instruments
-
TPS560200DBVR
Texas Instruments
-
AP3012KTR-G1
Diodes Incorporated
-
TLV61048DBVR
Texas Instruments
-
AZ34063UMTR-G1
Diodes Incorporated
-
TPS562200DDCR
Texas Instruments
-
AP62300TWU-7
Diodes Incorporated
-
MC34063EBD-TR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
