My Inquiry
My Account
Diodes Incorporated AP7365-30ERG-13
- Part No.:
- AP7365-30ERG-13
- Manufacturer:
- Diodes Incorporated
- Package:
- TO-261-4, TO-261AA
- Datasheet:
-
AP7365-30ERG-13.pdf
- Description:
- IC REG LINEAR 3V 600MA SOT223R
- Quantity:
- Payment:
- Shipping:
Inventory:3,425
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP7365-30ERG-13 from Diodes Incorporated is a fixed-output 3.0V, 600mA low-dropout linear regulator in SOT223-3 (ER) package with 35μA quiescent current, 300mV dropout at full load, and integrated enable control, thermal shutdown, and current limiting-designed for FPGA I/O rail and battery-powered portable electronics requiring stable low-noise voltage regulation.
For engineers reviewing the AP7365-30ERG-13 datasheet, AP7365-30ERG-13 pinout, AP7365-30ERG-13 application, or AP7365-30ERG-13 equivalent, key selection criteria include dropout voltage under 600mA load, PSRR performance at 1kHz, EN logic thresholds, thermal resistance in SOT223-ER package, and compatibility with 1μF ceramic output capacitors.
Technical Context
The AP7365-30ERG-13 implements a PMOS pass transistor architecture enabling low dropout (300mV @ 600mA, VOUT ≥ 2.5V) and fast transient response without external compensation. Its bandgap reference and error amplifier deliver ±2% output accuracy across –40°C to +85°C ambient.
Enable functionality uses active-high logic with VIH ≥ 1.4V and VIL ≤ 0.4V, supporting direct microcontroller GPIO control. Built-in protection includes thermal shutdown at +145°C with +15°C hysteresis and current limit clamping at 1.4A (short-circuit at 240mA).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | Fixed 3.0V ±2% over –40°C to +85°C, suitable for powering 3.3V-tolerant I/O rails with margin. |
| Max Output Current | 600mA continuous, enabling single-rail supply for mid-power FPGA I/O banks or DSP peripherals. |
| Dropout Voltage | 300mV at 600mA (VOUT ≥ 2.5V), allowing operation from 3.3V input down to 3.0V output with headroom. |
| Quiescent Current | 35μA typical, minimizing standby power loss in always-on subsystems like real-time clocks or sensor interfaces. |
| PSRR | 65dB at 1kHz, suppressing switching noise from upstream DC/DC converters feeding the LDO input. |
| Start-Up Time | 200μs typical, enabling rapid wake-up from deep-sleep modes in portable devices. |
| Thermal Resistance θJA | 142°C/W (SOT223-ER on FR-4, 1oz Cu), defining maximum power dissipation before thermal shutdown. |
Pinout & Package
SOT223-3 (ER package) with exposed thermal pad (OUT tab); pin 1 = OUT, pin 2 = GND, pin 3 = IN. The thermal pad must be soldered to a PCB copper pour for thermal management.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| OUT (Pin 1 / Tab) | Regulated output voltage node | Exposed metal tab serves as primary current path and thermal conduction surface; requires minimum 1μF ceramic capacitor to GND. |
| GND (Pin 2) | Reference ground for internal circuitry | Low-impedance return path for error amplifier, bandgap, and protection circuits; must connect directly to power plane. |
| IN (Pin 3) | Unregulated input voltage supply | Accepts 2V–6V input; requires ≥1μF ceramic bypass capacitor placed adjacent to pin to suppress high-frequency noise. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low IQ | 35μA enables >1-year battery life in coin-cell–powered IoT sensors with 10μA average system current. |
| Fast transient response | Stable 200mV undershoot/overshoot during 10mA↔600mA load steps, critical for GSM/TDMA baseband power integrity. |
| 1μF ceramic stability | Eliminates need for large tantalum or electrolytic capacitors, reducing board area and cost in space-constrained designs. |
| Integrated EN control | Active-high enable allows precise sequencing with MCU GPIO, supporting multi-rail power-up/down coordination. |
| Robust fault protection | Combined current limit (1.4A), short-circuit clamp (240mA), and thermal shutdown (+145°C) prevent damage during abnormal conditions. |
Applications
| FPGA I/O Power | Portable Medical Sensor Hub |
|---|---|
Use Scenario: Powering configurable I/O banks of Xilinx Artix-7 FPGA in handheld diagnostic device. IC Role / Device Role / Timing Role: Primary 3.0V LDO supplying I/O voltage with tight regulation and fast load step response. Use Value: Maintains signal integrity during burst-mode data acquisition by limiting output deviation to <±20mV under 100mA→600mA transients. |
Use Scenario: Regulating power for ultra-low-power ECG front-end ASIC and BLE radio in wearable patch monitor. IC Role / Device Role / Timing Role: Always-on 3.0V supply enabling sub-10μA sleep current while supporting instant wake-up. Use Value: 35μA quiescent current extends CR2032 battery life beyond 18 months in continuous monitoring mode. |
| Industrial PLC Digital Input Module | Automotive Infotainment USB Hub |
Use Scenario: Providing isolated 3.0V rail for optocoupler interface ICs in DIN-rail mounted controller. IC Role / Device Role / Timing Role: Secondary LDO after isolated DC/DC converter, rejecting ripple and ensuring noise-free logic levels. Use Value: 65dB PSRR at 1kHz attenuates 100kHz switching noise from upstream flyback converter to <100μVpp. |
Use Scenario: Supplying 3.0V to USB 2.0 PHY and hub controller in automotive head unit with wide input range. IC Role / Device Role / Timing Role: Input-tolerant LDO accepting 4.3V–5.5V vehicle battery variations while delivering clean 3.0V. Use Value: 2V–6V input range accommodates cold-crank (4.3V) and load-dump (5.5V) conditions without dropout or reset. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar fixed-output LDO applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MCP1703T-3002E/MB | Higher IQ (2.5μA vs 35μA), lower max current (250mA), same 3.0V fixed output and SOT23-5 package. | Optimized for ultra-low-power microcontroller cores-not suitable for 600mA FPGA I/O loads. | Select only when load current ≤250mA and IQ <5μA is mandatory; not drop-in for AP7365-30ERG-13's 600mA capability. |
| TPS7A2030PDBVR | Lower dropout (175mV @ 300mA), higher PSRR (75dB @ 1kHz), but rated only to 300mA and uses 5-pin SOT23. | Better noise rejection and efficiency at light loads, but insufficient current for high-speed I/O banks. | Prefer for noise-sensitive analog rails with <300mA demand; avoid where 600mA peak current or SOT223 thermal mass is required. |
Compared with MCP1703T-3002E/MB and TPS7A2030PDBVR, the AP7365-30ERG-13 uniquely balances 600mA delivery, 35μA IQ, and SOT223 thermal robustness-making it the only viable choice for compact, battery-operated systems needing both high current and long runtime.
Availability
AP7365-30ERG-13 is available at Aetrix Electronics and suitable for FPGA power delivery, portable medical instrumentation, industrial digital I/O modules, and automotive infotainment subsystems requiring stable component supply with full traceability and lifecycle continuity.
Supply support for AP7365-30ERG-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global semiconductor company specializing in discrete, analog, and mixed-signal solutions, with manufacturing certified to IATF 16949 and product qualification per AEC-Q100/101 standards.
The AP7365 series belongs to Diodes' high-performance LDO portfolio targeting battery-powered and thermally constrained applications-designed specifically for fast transient response, ultra-low IQ, and seamless integration into space-limited portable and industrial systems.
FAQ
What is the recommended input capacitor for AP7365-30ERG-13?
A minimum 1μF X5R/X7R ceramic capacitor placed between IN and GND is required for stability and noise suppression. The datasheet confirms no upper capacitance limit, and larger values improve line transient response. Layout best practice mandates placing this capacitor within 2mm of the IN and GND pins using wide copper traces to minimize inductance.
Can AP7365-30ERG-13 operate without an output capacitor?
No. An output capacitor is mandatory for stability and transient performance. The device is specified to be stable only with ≥1μF ceramic output capacitance having ESR >15mΩ. Omitting the output capacitor causes oscillation and unregulated output, as confirmed by the "Output Capacitor" section in DS32260 Rev. 11–3, page 8.
Does AP7365-30ERG-13 require a minimum load current?
No minimum load is required. The AP7365-30ERG-13 remains stable and regulated from zero load up to 600mA, as explicitly stated in the "No Load Stability" subsection (page 9). This eliminates the need for dummy loads in standby or sleep modes.
How does thermal shutdown behave during sustained overload?
When junction temperature reaches +145°C, the output disables; recovery occurs at +130°C due to +15°C hysteresis. Under continuous overload, this causes thermal cycling-on/off oscillation-limiting average power dissipation. The SOT223-ER package's θJA of 142°C/W means >420mW dissipation in still air will trigger cycling at +85°C ambient.
AP7365-30ERG-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-261-4, TO-261AA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 6V
- Voltage - Output (Min/Fixed):
- 3V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.4V @ 600mA
- Current - Output:
- 600mA
- Current - Quiescent (Iq):
- 80 µA
- Current - Supply (Max):
- -
- PSRR:
- 65dB (1kHz)
- Control Features:
- -
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 85°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-223R
AP7365-30ERG-13 FAQ
1.How can I place an order for AP7365-30ERG-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP7365-30ERG-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP7365-30ERG-13 reliable?
The price and inventory of AP7365-30ERG-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP7365-30ERG-13 is usually 5 days.
3.What payment methods are accepted for AP7365-30ERG-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP7365-30ERG-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP7365-30ERG-13?
AP7365-30ERG-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP7365-30ERG-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP7365-30ERG-13?
For technical support, including AP7365-30ERG-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP7365-30ERG-13 requirements.
6.How does Aetrix verify that AP7365-30ERG-13 is sourced from the original manufacturer or authorized distributors?
All AP7365-30ERG-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP7365-30ERG-13 meets industry standards.
7.What is the process for return or replacement of AP7365-30ERG-13?
All AP7365-30ERG-13 units undergo pre-shipment inspection (PSI). If there is an issue with AP7365-30ERG-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP7365-30ERG-13 part is unused and in its original packaging.
Return procedure for AP7365-30ERG-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP7365-30ERG-13 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
