My Inquiry
My Account
Diodes Incorporated AP7380-30WR-7
- Part No.:
- AP7380-30WR-7
- Manufacturer:
- Diodes Incorporated
- Package:
- SC-74A, SOT-753
- Datasheet:
-
AP7380-30WR-7.pdf
- Description:
- IC REG LINEAR 3V 150MA SOT25
- Quantity:
- Payment:
- Shipping:
Inventory:3,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AP7380-30WR-7 from Diodes Incorporated is a fixed 3.0V, 150mA ultra-low dropout (ULDO) linear regulator in SOT25 (WR) package. It delivers ±1% output voltage accuracy, 500mV dropout at 50mA, 1.8µA ground current at zero load, and operates across 3.5V–24V input range-enabling direct regulation from 12V/24V rails or multi-cell batteries in portable instrumentation and USB-powered devices.
For engineers reviewing the AP7380-30WR-7 datasheet, AP7380-30WR-7 pinout, AP7380-30WR-7 application, or AP7380-30WR-7 equivalent, key selection criteria include dropout performance under 150mA load, thermal shutdown behavior at +160°C, compatibility with 1µF ceramic output capacitors, and EN pin logic thresholds (2.0V high / 0.4V low) for system-level power sequencing control.
Technical Context
The AP7380-30WR-7 integrates a precision voltage reference, error amplifier, resistor network for fixed 3.0V output, current-limit protection (150mA), and enable-controlled shutdown. Its architecture supports stable operation with low-ESR ceramic capacitors and exhibits ±100ppm/°C output voltage drift over –40°C to +125°C junction temperature.
Line regulation is 0.05%/V and load regulation is 0.5% across 1–150mA output current, while thermal shutdown activates at +160°C with +20°C hysteresis-ensuring robust fault recovery in thermally constrained PCB layouts without external thermal management.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | Fixed 3.0V ±1% - ensures stable MCU core or sensor biasing without external feedback components. |
| Max Input Voltage | 24V - allows direct connection to industrial 12V/24V supplies or 6-cell Li-ion battery stacks. |
| Dropout Voltage | 360mV typ @ 50mA - enables >90% efficiency at light loads when VIN = 3.36V, critical for battery runtime extension. |
| Ground Current | 1.8µA typ @ IOUT = 0mA - minimizes standby power loss in always-on monitoring circuits. |
| EN Pin Threshold | VIL = 0.4V, VIH = 2.0V - compatible with 1.8V/3.3V GPIOs for precise enable/disable control. |
| Thermal Shutdown | +160°C activation with +20°C hysteresis - prevents permanent damage during sustained overload or poor heatsinking. |
| Output Accuracy | ±1% over temperature and line/load - eliminates need for post-regulation trimming in precision analog signal chains. |
Pinout & Package
SOT25 (WR) package: 5-pin surface-mount outline with exposed pad (non-electrical), 3.0mm × 2.8mm footprint, 1.1mm height, matte tin-plated leads, moisture sensitivity level 1 per J-STD-020.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND | Power ground reference and thermal path to PCB copper; must be connected to solid ground plane for thermal performance. |
| 2 | VIN | Main input supply terminal; accepts 3.5–24V DC; requires 1µF ceramic input capacitor placed ≤2mm from pin. |
| 3 | VOUT | Regulated 3.0V output; drives load and 1µF ceramic output capacitor; sensitive to trace inductance. |
| 4 | NC | No internal connection; left unconnected or tied to GND for mechanical stability only. |
| 5 | EN | Active-high enable input; pulls regulator into <0.01µA standby mode when held ≤0.4V; requires clean digital logic drive. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 1.8µA at zero load - extends battery life in IoT sensors operating in deep-sleep cycles. |
| Low-ESR ceramic capacitor support | Stable with 1µF X5R/X7R output cap - eliminates bulk tantalum or electrolytic capacitors, reducing board area and cost. |
| High line/load regulation | 0.05%/V line, 0.5% load variation - maintains ADC reference stability despite input rail sag or dynamic load steps. |
| Integrated thermal shutdown | +160°C trip with +20°C hysteresis - enables automatic recovery after transient overloads without system reset. |
| Wide input range | 3.5V–24V operation - accommodates unregulated wall adapters, automotive transients, and multi-cell battery inputs without pre-regulation. |
Applications
| Portable Medical Sensors | Industrial USB-Powered Modules |
|---|---|
|
Use Scenario: Continuous glucose monitor (CGM) with BLE radio and electrochemical sensor front-end. IC Role / Device Role / Timing Role: Primary 3.0V supply for analog sensor interface and BLE SoC core domain. Use Value: 1.8µA ground current extends coin-cell battery life beyond 6 months; ±1% output accuracy ensures consistent sensor calibration across temperature. |
Use Scenario: DIN-rail mounted USB-C field data logger interfacing with 4–20mA transmitters. IC Role / Device Role / Timing Role: Local 3.0V regulator for USB PHY and microcontroller I/O bank from 24V industrial bus. Use Value: 24V max input withstands 40V transients per IEC 61000-4-4; 500mV dropout enables operation down to 3.5V during brownout conditions. |
| Handheld Test Instruments | Automotive Diagnostic Tools |
|
Use Scenario: Battery-powered multimeter with LCD display, op-amp signal conditioning, and flash memory. IC Role / Device Role / Timing Role: Main 3.0V rail for display driver, ADC reference, and non-volatile memory. Use Value: Low noise and 0.5% load regulation prevent digit flicker during backlight switching; thermal shutdown protects against enclosure overheating. |
Use Scenario: OBD-II scanner powered via vehicle cigarette lighter (9–16V nominal, up to 24V cranking). IC Role / Device Role / Timing Role: Post-regulator for 3.0V logic supply feeding CAN transceiver and ARM Cortex-M host. Use Value: 24V absolute max rating handles load-dump spikes; EN pin allows microcontroller-controlled power gating during sleep mode. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ULDO regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MCP1703T-3002E/MB | 3.0V fixed, 250mA, 600mV dropout @ 250mA, 2.5µA IQ, SOT23-5 | Higher current capability but larger dropout at full load; no thermal shutdown | Select when >150mA peak load required and thermal fault protection is handled externally. |
| TPS7A2030PDBVR | 3.0V fixed, 300mA, 175mV dropout @ 300mA, 6.5µA IQ, WSON-6 | Lower dropout and higher current, but 3.5× higher quiescent current and no EN pin | Select for ultra-low-dropout priority in space-constrained designs where standby current is secondary. |
Compared with MCP1703T-3002E/MB and TPS7A2030PDBVR, the AP7380-30WR-7 uniquely balances ultra-low IQ (1.8µA), integrated thermal shutdown, and 24V input tolerance-making it optimal for long-life battery systems requiring fault resilience without external protection circuitry.
Availability
AP7380-30WR-7 is available at Aetrix Electronics and suitable for portable medical sensors, industrial USB-powered modules, handheld test instruments, and automotive diagnostic tools requiring stable component supply across extended temperature and input voltage ranges.
Supply support for AP7380-30WR-7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and ICs, specializing in power management, signal integrity, and protection solutions for industrial, computing, and consumer markets.
The AP7380 series belongs to Diodes' high-reliability linear regulator product line, designed specifically for battery-powered and wide-input industrial applications demanding low dropout, ultra-low quiescent current, and robust thermal protection.
FAQ
What is the minimum input voltage required for regulation at 3.0V output?
The AP7380-30WR-7 requires VIN ≥ 3.5V to maintain regulation, as specified in Recommended Operating Conditions. Below this, output voltage collapses due to insufficient headroom for internal pass element operation-even though dropout voltage is as low as 360mV at 50mA.
Can the AP7380-30WR-7 be used with a 10µF aluminum electrolytic output capacitor?
No-datasheet specifies stability only with low-ESR ceramic capacitors (1µF typical). Aluminum electrolytics exhibit higher ESR and ESL, which can cause oscillation or poor transient response. Use X5R/X7R 1µF ceramics placed within 2mm of VOUT and GND pins.
Is the EN pin internally pulled up or down?
The EN pin has no internal pull-up or pull-down; it is a high-impedance CMOS input. External pull-up to VIN or microcontroller GPIO is required to ensure defined state during power-up. Leaving it floating may result in unpredictable regulator enable/disable behavior.
Does the AP7380-30WR-7 support reverse polarity protection?
No-the device lacks built-in reverse-voltage protection. Applying negative voltage to VIN or VOUT relative to GND exceeds Absolute Maximum Ratings and may cause permanent damage. An external series Schottky diode or dedicated protection IC is required for reverse-polarity environments.
AP7380-30WR-7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- SC-74A, SOT-753
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 24V
- Voltage - Output (Min/Fixed):
- 3V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 1.5V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 3 µA
- Current - Supply (Max):
- 3 µA
- PSRR:
- -
- Control Features:
- -
- Protection Features:
- Current Limit, Thermal Shutdown
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-25
AP7380-30WR-7 FAQ
1.How can I place an order for AP7380-30WR-7 through Aetrix?
Please submit a Request for Quotation (RFQ) for AP7380-30WR-7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AP7380-30WR-7 reliable?
The price and inventory of AP7380-30WR-7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AP7380-30WR-7 is usually 5 days.
3.What payment methods are accepted for AP7380-30WR-7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AP7380-30WR-7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AP7380-30WR-7?
AP7380-30WR-7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AP7380-30WR-7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AP7380-30WR-7?
For technical support, including AP7380-30WR-7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AP7380-30WR-7 requirements.
6.How does Aetrix verify that AP7380-30WR-7 is sourced from the original manufacturer or authorized distributors?
All AP7380-30WR-7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AP7380-30WR-7 meets industry standards.
7.What is the process for return or replacement of AP7380-30WR-7?
All AP7380-30WR-7 units undergo pre-shipment inspection (PSI). If there is an issue with AP7380-30WR-7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AP7380-30WR-7 part is unused and in its original packaging.
Return procedure for AP7380-30WR-7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AP7380-30WR-7 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
