My Inquiry
My Account
Microchip Technology AT25010A-10TI-2.7
- Part No.:
- AT25010A-10TI-2.7
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 8-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
AT25010A-10TI-2.7.pdf
- Description:
- IC EEPROM 1KBIT SPI 20MHZ 8TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:2,184
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AT25010A-10TI-2.7 from Microchip Technology (formerly Atmel) is a 1-Kbit SPI serial EEPROM organized as 128 words × 8 bits, operating from 2.7V to 5.5V with 20 MHz clock rate at 5V, 8-byte page write capability, and hardware/software write protection. It serves as nonvolatile configuration storage in microcontroller-based industrial control modules requiring low-voltage operation and automotive-grade reliability.
For engineers reviewing the AT25010A-10TI-2.7 datasheet, AT25010A-10TI-2.7 pinout, AT25010A-10TI-2.7 application, or AT25010A-10TI-2.7 equivalent, key selection criteria include its TSSOP-8 package, −40°C to +85°C industrial temperature range, 1 million write cycles endurance, 100-year data retention, and support for SPI Modes 0 and 3 with HOLD and WP pins for robust system-level data integrity.
Technical Context
The AT25010A-10TI-2.7 implements a synchronous serial peripheral interface (SPI) slave architecture with separate SI/SO lines, MSB-first data transfer, and op-code–driven command set including WREN, WRITE, RDSR, and WRSR. Its internal status register controls block write protection (BP1/BP0) and ready/busy (RDY) flag.
It features self-timed internal write cycles (≤5 ms), no pre-erase requirement, and dual-layer data protection via both hardware (WP pin) and software (WREN/WRDI instructions). The HOLD pin suspends ongoing serial communication without resetting the sequence, enabling multi-master arbitration support.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Size | 1024 bits (128 × 8), sufficient for small firmware parameters or calibration data storage |
| Supply Voltage Range | 2.7 V to 5.5 V - supports direct interfacing with 3.3 V and 5 V microcontrollers without level shifting |
| Max Clock Frequency | 20 MHz at VCC = 5 V - enables fast configuration reads during boot-up sequences |
| Write Endurance | 1,000,000 cycles - suitable for frequent logging or runtime parameter updates in industrial sensors |
| Data Retention | 100 years at 25°C - ensures long-term reliability in unattended embedded systems |
| Operating Temperature | −40°C to +85°C - qualified for industrial control cabinets and automotive under-hood environments |
| Page Write Size | 8 bytes - minimizes write latency while avoiding excessive overwrites in sequential updates |
Pinout & Package
AT25010A-10TI-2.7 is supplied in an 8-lead Thin Shrink Small Outline Package (TSSOP), 0.170" wide body, JEDEC MO-153 compliant, with 0.65 mm pitch and exposed pad not present.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| CS | Chip Select | Active-low enable signal; initiates SPI command sequence on falling edge |
| SCK | Serial Clock | Input-only synchronous timing reference; device operates only as SPI slave |
| SI | Serial Data Input | Receives op-codes, addresses, and write data; MSB-first, sampled on SCK rising edge (Mode 0) |
| SO | Serial Data Output | Drives read data and status register contents; high-impedance when CS high or HOLD active |
| GND | Ground Reference | Return path for all digital and power currents; requires low-impedance PCB connection |
| VCC | Power Supply | Single 2.7–5.5 V supply; decoupling capacitor (0.1 µF) required near pin |
| WP | Write Protect | Hardware lock: drives low to inhibit all write operations regardless of WREN state |
| HOLD | Communication Suspend | Pauses ongoing SPI transfer without resetting address counter; requires SCK low to assert |
Key Features
| Feature | Design Value |
|---|---|
| SPI Mode Compatibility | Supports Modes 0 (CPOL=0, CPHA=0) and 3 (CPOL=1, CPHA=1) - interoperable with diverse MCU SPI peripherals |
| Block Write Protection | Four configurable protection levels (none, 1/4, 1/2, full array) via nonvolatile BP1/BP0 bits - prevents accidental corruption of critical sectors |
| Self-timed Write Cycle | No external timing control needed; internal logic completes erase-and-program in ≤5 ms - simplifies host firmware design |
| Dual Write Enable | Combines hardware (WP pin) and software (WREN instruction) activation - enforces layered security for safety-critical writes |
| HOLD Functionality | Halts serial communication mid-sequence without losing context - enables priority interrupt handling in real-time systems |
Applications
| Industrial Sensor Calibration | Automotive ECU Configuration |
|---|---|
Use Scenario: Storing factory-calibrated sensor offset/gain coefficients and temperature compensation tables in pressure or current-sense modules. IC Role / Device Role / Timing Role: Nonvolatile configuration memory accessed during power-on initialization via SPI from host MCU. Use Value: Enables field-replaceable sensor modules with unique calibration data retained across 100+ years without battery backup. | Use Scenario: Holding vehicle-specific tuning maps, VIN-linked settings, and diagnostic fault codes in engine control units. IC Role / Device Role / Timing Role: SPI EEPROM providing secure, write-protected storage for mission-critical ECU parameters. Use Value: Meets AEC-Q100 Grade 2 requirements with −40°C to +85°C operation and 1M write cycles for reprogramming during service. |
| Smart Meter Firmware Settings | Medical Device Parameter Storage |
Use Scenario: Retaining tariff schedules, pulse constants, and communication protocol configurations in utility meters deployed for >15 years. IC Role / Device Role / Timing Role: Low-power serial EEPROM interfaced to metering SoC during wake-up cycles. Use Value: 2.7 V minimum supply allows operation during brown-out conditions; 100-year retention eliminates recalibration during product lifetime. | Use Scenario: Saving user-adjusted therapy parameters, usage logs, and calibration history in portable infusion pumps and glucose monitors. IC Role / Device Role / Timing Role: Secure, tamper-resistant nonvolatile memory with hardware WP pin enabled during normal operation. Use Value: Block write protection prevents overwrite of FDA-mandated audit trails; 1M endurance supports daily clinical use over 10+ years. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial EEPROM applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| M95128-WMN6TP | 128 Kbit capacity, 5 MHz max clock at 2.5–5.5 V, SO8 package, no HOLD pin | Larger memory for complex configuration sets; lacks HOLD for multi-master suspend | Select when >1 Kbit storage is required and HOLD functionality is unnecessary |
| CAT25010VI-GT3 | 1 Kbit, 10 MHz max clock at 1.8–5.5 V, TSSOP-8, identical pinout and command set | Broader voltage range (1.8 V) but lower speed; same footprint and software compatibility | Choose for ultra-low-power 1.8 V systems where 20 MHz is not required |
Compared with M95128-WMN6TP and CAT25010VI-GT3, the AT25010A-10TI-2.7 delivers optimal balance of speed (20 MHz), industrial temperature rating, and HOLD/WP dual-protection - making it preferred for time-sensitive, safety-aware designs where pin compatibility and deterministic suspend behavior are critical.
Availability
AT25010A-10TI-2.7 is available at Aetrix Electronics and suitable for industrial sensor calibration, automotive ECU configuration, and smart meter firmware settings requiring stable component supply across extended product lifecycles.
Supply support for AT25010A-10TI-2.7 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Microchip Technology is a global semiconductor company specializing in microcontrollers, analog devices, and memory solutions, with broad industrial and automotive qualification expertise.
The AT25010A-10TI-2.7 belongs to Microchip's legacy Atmel SPI EEPROM family, designed specifically for reliable, low-voltage nonvolatile storage in space-constrained embedded systems requiring guaranteed data integrity.
FAQ
What is the maximum clock frequency supported by the AT25010A-10TI-2.7?
The AT25010A-10TI-2.7 supports up to 20 MHz SCK frequency when operated at VCC = 5.0 V. At 2.7 V, the maximum rated clock frequency is 10 MHz per AC characteristics table. This allows high-speed configuration reads in host MCU boot sequences while maintaining timing margin at lower voltages.
Does the AT25010A-10TI-2.7 require an external erase cycle before writing?
No, the AT25010A-10TI-2.7 does not require a separate erase cycle. All programming operations are self-timed and internally manage erase-and-write sequencing. A Write Enable (WREN) instruction must precede each WRITE command, and the WP pin must be high during write attempts. The AT25010A-10TI-2.7 automatically returns to write-disable state after completion.
How is write protection implemented on the AT25010A-10TI-2.7?
The AT25010A-10TI-2.7 implements dual-layer write protection: hardware via the WP pin (low = all writes inhibited), and software via status register bits BP1/BP0 that configure 1/4, 1/2, or full-array block protection. Both mechanisms operate independently - WP overrides software settings, and WRSR can only modify BP bits when WP is high and WREN has been issued.
What package type is used for the AT25010A-10TI-2.7?
The AT25010A-10TI-2.7 uses an 8-lead Thin Shrink Small Outline Package (TSSOP), designated as 8A2 per Microchip's ordering guide. It measures 3.00 mm × 4.40 mm with 0.65 mm lead pitch and complies with JEDEC MO-153, Variation AA. This compact surface-mount package supports high-density PCB layouts in industrial and automotive modules.
Can the AT25010A-10TI-2.7 interface with a 1.8 V microcontroller?
No - the AT25010A-10TI-2.7 is a 2.7 V–5.5 V device (indicated by "-2.7" suffix). For 1.8 V operation, Microchip offers the AT25010A-10TI-1.8 variant. Interfacing the AT25010A-10TI-2.7 with a 1.8 V MCU requires level translation on all SPI signals (CS, SCK, SI, SO, WP, HOLD) to avoid violating absolute maximum input voltage ratings.
AT25010A-10TI-2.7 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 8-TSSOP (0.173", 4.40mm Width)
- Packaging:
- Tube
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- EEPROM
- Technology:
- EEPROM
- Memory Size:
- 1Kbit
- Memory Organization:
- 128 x 8
- Memory Interface:
- SPI
- Clock Frequency:
- 20 MHz
- Write Cycle Time - Word, Page:
- 5ms
- Access Time:
- -
- Voltage - Supply:
- 2.7V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-TSSOP
AT25010A-10TI-2.7 FAQ
1.How can I place an order for AT25010A-10TI-2.7 through Aetrix?
Please submit a Request for Quotation (RFQ) for AT25010A-10TI-2.7 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AT25010A-10TI-2.7 reliable?
The price and inventory of AT25010A-10TI-2.7 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AT25010A-10TI-2.7 is usually 5 days.
3.What payment methods are accepted for AT25010A-10TI-2.7?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AT25010A-10TI-2.7 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AT25010A-10TI-2.7?
AT25010A-10TI-2.7 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AT25010A-10TI-2.7 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AT25010A-10TI-2.7?
For technical support, including AT25010A-10TI-2.7 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AT25010A-10TI-2.7 requirements.
6.How does Aetrix verify that AT25010A-10TI-2.7 is sourced from the original manufacturer or authorized distributors?
All AT25010A-10TI-2.7 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AT25010A-10TI-2.7 meets industry standards.
7.What is the process for return or replacement of AT25010A-10TI-2.7?
All AT25010A-10TI-2.7 units undergo pre-shipment inspection (PSI). If there is an issue with AT25010A-10TI-2.7, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AT25010A-10TI-2.7 part is unused and in its original packaging.
Return procedure for AT25010A-10TI-2.7:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AT25010A-10TI-2.7 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
