My Inquiry
My Account
Microchip Technology AT29C512-12PI
- Part No.:
- AT29C512-12PI
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 32-DIP (0.600", 15.24mm)
- Datasheet:
-
AT29C512-12PI.pdf
- Description:
- IC FLASH 512KBIT PARALLEL 32DIP
- Quantity:
- Payment:
- Shipping:
Inventory:2,794
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AT29C512-12PI from Atmel is a 512 Kbit (64K × 8) in-system programmable Flash memory IC designed for nonvolatile code and data storage in embedded systems. It features 70 ns read access time, 5 V ±10% single-supply operation, 10 ms sector program cycle time, and supports hardware/software data protection. It is used in industrial firmware storage where reliable reprogramming without high-voltage programming is required.
For engineers reviewing the AT29C512-12PI datasheet, AT29C512-12PI pinout, AT29C512-12PI application, or AT29C512-12PI equivalent, key selection considerations include its 120 ns maximum access time at industrial temperature range (–40°C to +85°C), PLCC-32 package, sector-based 128-byte programming, DATA polling/Toggle Bit end-of-write detection, and CMOS/TTL-compatible I/O.
Technical Context
The AT29C512-12PI implements a sector-erase architecture with 512 independent 128-byte sectors, enabling selective reprogramming without full-chip erasure. Its internal address and data latches allow 128-byte page loading before automatic erase-and-program execution under internal timer control.
It supports dual write-enable methods (WE- or CE-controlled byte loads), hardware protection via VCC sense (<3.8 V inhibit), power-on delay (~5 ms), and noise filtering (<15 ns pulse rejection), plus software protection using three-step command sequences (AAh/55h/A0h) to enable/disable write access.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 512 Kbit (64K × 8), sufficient for boot code or configuration tables in microcontroller-based systems |
| Read Access Time | 120 ns max - defines minimum bus cycle timing for CPU interface at industrial temperature |
| Sector Size | 128 bytes - enables fine-grained firmware updates without disturbing adjacent sectors |
| Program Cycle Time | 10 ms per sector - determines worst-case firmware patch latency during field upgrades |
| Supply Voltage | 5 V ±10% - compatible with legacy 5 V logic rails without external regulators |
| Operating Temperature | –40°C to +85°C - qualified for industrial environments including factory automation and motor drives |
| Standby Current | 300 µA max - enables low-power retention in battery-backed or sleep-mode applications |
| Endurance | >10,000 program/erase cycles per sector - supports long-term field update capability in deployed equipment |
Pinout & Package
AT29C512-12PI is packaged in a 32-lead Plastic J-Leaded Chip Carrier (PLCC-32), pin-compatible with industry-standard 32J footprint. The package features gull-wing leads, 1.27 mm pitch, and JEDEC MS-016 compliant dimensions (12.45 mm × 14.00 mm body).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A15 | Address Inputs | 16-bit address bus for accessing all 64K words; A7–A15 define sector address during programming |
| I/O0–I/O7 | Bidirectional Data Bus | 8-bit parallel interface; I/O7 used for DATA polling, I/O6 for Toggle Bit status monitoring |
| CE | Chip Enable | Active-low chip select; must be low for read/write; high disables outputs and enters standby mode |
| OE | Output Enable | Active-low output control; used with CE to manage bus contention during reads |
| WE | Write Enable | Active-low write strobe; controls byte load initiation and sector programming trigger |
| VCC | Power Supply | +5 V ±10% supply; powers core logic and I/O buffers; VCC sense circuitry prevents writes below ~3.8 V |
| GND | Ground Reference | Signal and power ground reference plane; decoupling required within 1 cm of VCC pin |
| NC | No Connect | Unbonded pins (positions 6, 9, 10, 22, 23); must remain unconnected per design |
Key Features
| Feature | Design Value |
|---|---|
| Single 5 V Reprogramming | Eliminates need for +12 V programming voltage, simplifying power design and enabling in-circuit updates |
| Hardware Data Protection | VCC sense, 5 ms power-on delay, and noise filtering prevent accidental writes during power transients or EMI events |
| Software Data Protection | Three-byte unlock sequence (AAh/55h/A0h) required before each sector program, preventing unintended firmware corruption |
| DATA Polling & Toggle Bit | Real-time write completion detection via I/O7 complement or I/O6 toggling-no fixed timeout needed in host firmware |
| CMOS/TTL Compatibility | Input thresholds (VIL = 0.8 V, VIH = 2.0 V) and output drive (VOH = 2.4 V @ –400 µA) ensure interoperability with mixed-logic systems |
| Industrial Temperature Range | Guaranteed operation from –40°C to +85°C supports deployment in harsh environments without derating |
Applications
| Industrial PLC Firmware Storage | Medical Device Configuration Memory |
|---|---|
Use Scenario: Storing ladder logic programs and I/O mapping tables in programmable logic controllers operating in factory-floor environments with wide ambient temperature swings. IC Role / Device Role / Timing Role: Nonvolatile code storage with in-system reprogrammability; provides deterministic 120 ns read access for real-time scan-cycle execution. Use Value: Enables remote firmware updates without removing the PLC module; sector-level erase preserves calibration data during partial code revisions. |
Use Scenario: Holding device-specific calibration coefficients, safety-critical parameter sets, and regulatory-compliant boot images in portable diagnostic equipment. IC Role / Device Role / Timing Role: Secure, tamper-resistant configuration store; software/hardware protection prevents unauthorized modification of FDA-cleared settings. Use Value: Meets IEC 62304 software lifecycle requirements by supporting traceable, versioned firmware updates with write-locking capability. |
| Automotive Body Control Module (BCM) | Telecom Line Card Boot Memory |
Use Scenario: Storing lighting control algorithms, window position profiles, and fault log history in automotive BCMs exposed to under-hood thermal cycling. IC Role / Device Role / Timing Role: Industrial-grade Flash memory interfacing directly to 8-bit/16-bit microcontrollers; operates reliably across –40°C to +85°C without thermal derating. Use Value: >10,000 endurance cycles support lifetime over-the-air (OTA) updates; low 300 µA standby current minimizes battery drain during vehicle sleep mode. |
Use Scenario: Hosting bootloader and FPGA configuration bitstreams on carrier-grade line cards requiring hot-swap compatibility and field-upgradable firmware. IC Role / Device Role / Timing Role: Parallel-interface boot memory mapped into processor address space; 120 ns access ensures fast initialization during card insertion or reset. Use Value: Sector-based programming allows independent update of bootloader and FPGA image without interrupting active traffic processing. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AM29LV512-120EC | 3 V core / 5 V I/O; 120 ns access; 512 Kbit; SOIC-32 package | Lacks hardware VCC-sense protection; requires separate 3 V supply rail | Select when migrating to lower-power 3 V systems; verify compatibility with existing 5 V address/data bus levels |
| MX29LV512CTTI-12G | 3 V only; 120 ns access; 512 Kbit; TSOP-32; supports CFI query | No 5 V tolerance; no hardware write-inhibit on VCC drop; requires CFI-aware bootloader | Prefer for new 3 V designs needing standardized command set; not drop-in for 5 V legacy interfaces |
Compared with AM29LV512-120EC and MX29LV512CTTI-12G, the AT29C512-12PI uniquely delivers true 5 V-only operation with integrated VCC-sense and noise-filtered write control-critical for retrofitting into legacy 5 V industrial controllers without board redesign.
Availability
AT29C512-12PI is available at Aetrix Electronics and suitable for industrial automation, medical diagnostics, automotive body electronics, and telecom infrastructure requiring stable component supply across extended product lifecycles.
Supply support for AT29C512-12PI includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Atmel Corporation (now part of Microchip Technology) is a semiconductor manufacturer specializing in microcontrollers, Flash memory, and secure authentication devices for embedded applications.
The AT29C512-12PI belongs to Atmel's legacy parallel Flash memory product line, engineered for cost-sensitive, high-reliability industrial systems requiring simple 5 V in-system reprogrammability without external high-voltage generators.
FAQ
What is the maximum read access time specification for AT29C512-12PI?
The AT29C512-12PI has a maximum read access time (tACC) of 120 ns over the full industrial temperature range (–40°C to +85°C). This value is guaranteed under VCC = 5 V ±10%, and defines the minimum time between address valid and stable data output on I/O0–I/O7. It is measured with CL = 5 pF and applies to both PLCC-32 and other package variants sharing the -12 speed grade.
Does AT29C512-12PI support in-system programming without external high voltage?
Yes, AT29C512-12PI supports true 5-volt-only in-system programming. No external high-voltage generator is required: all program and erase operations are initiated using standard 5 V logic-level signals (CE, OE, WE) and specific address/data command sequences. This eliminates the need for dedicated programming hardware and enables field firmware updates via the same bus used for normal read operations.
How does hardware data protection work on AT29C512-12PI?
AT29C512-12PI implements four hardware safeguards: (1) VCC sense circuitry inhibits programming if supply drops below ~3.8 V; (2) a 5 ms internal power-on delay prevents writes during startup; (3) program cycles are blocked unless CE is low, OE is high, and WE is low simultaneously; and (4) input noise filters reject pulses shorter than 15 ns on WE or CE. These operate independently of software protection.
What package type is used for AT29C512-12PI?
AT29C512-12PI is supplied in a 32-lead Plastic J-Leaded Chip Carrier (PLCC-32), designated as package type 32J. Its dimensions conform to JEDEC MS-016, Variation AE, with a body size of 12.45 mm × 14.00 mm and 1.27 mm lead pitch. Pin 1 is marked by a corner notch, and the package is lead-free and RoHS-compliant per Atmel's 2002 specification.
Can AT29C512-12PI be used as a direct replacement for AT29C512-12JC?
No, AT29C512-12PI is not a direct replacement for AT29C512-12JC due to differing packages: AT29C512-12PI uses PLCC-32 (32J), while AT29C512-12JC uses PDIP-32 (32P6). Although both share identical speed grade (-12), temperature range, and electrical specifications, their mechanical footprints and soldering requirements differ. PCB layout and reflow profile must be validated separately for each package.
AT29C512-12PI Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 32-DIP (0.600", 15.24mm)
- Packaging:
- Tube
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH
- Memory Size:
- 512Kbit
- Memory Organization:
- 64K x 8
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 10ms
- Access Time:
- 120 ns
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TC)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 32-PDIP
AT29C512-12PI FAQ
1.How can I place an order for AT29C512-12PI through Aetrix?
Please submit a Request for Quotation (RFQ) for AT29C512-12PI on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AT29C512-12PI reliable?
The price and inventory of AT29C512-12PI are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AT29C512-12PI is usually 5 days.
3.What payment methods are accepted for AT29C512-12PI?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AT29C512-12PI transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AT29C512-12PI?
AT29C512-12PI orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AT29C512-12PI order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AT29C512-12PI?
For technical support, including AT29C512-12PI datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AT29C512-12PI requirements.
6.How does Aetrix verify that AT29C512-12PI is sourced from the original manufacturer or authorized distributors?
All AT29C512-12PI products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AT29C512-12PI meets industry standards.
7.What is the process for return or replacement of AT29C512-12PI?
All AT29C512-12PI units undergo pre-shipment inspection (PSI). If there is an issue with AT29C512-12PI, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AT29C512-12PI part is unused and in its original packaging.
Return procedure for AT29C512-12PI:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AT29C512-12PI Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
