My Inquiry
My Account
Microchip Technology AT29C512-70JI
- Part No.:
- AT29C512-70JI
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 32-LCC (J-Lead)
- Datasheet:
-
AT29C512-70JI.pdf
- Description:
- IC FLASH 512KBIT PARALLEL 32PLCC
- Quantity:
- Payment:
- Shipping:
Inventory:1,435
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AT29C512-70JI from Atmel is a 512 Kbit (64K × 8) in-system programmable Flash memory IC operating at 5 V only, featuring 70 ns read access time, sector-based reprogramming (512 sectors × 128 bytes), and hardware/software data protection. It serves as nonvolatile program/data storage in industrial microcontroller systems requiring field-upgradable firmware with endurance exceeding 10,000 write/erase cycles.
For engineers reviewing the AT29C512-70JI datasheet, AT29C512-70JI pinout, AT29C512-70JI application, or AT29C512-70JI equivalent, key selection considerations include its industrial temperature range (–40°C to +85°C), TSOP/PLCC package compatibility, sector-program timing (10 ms), DATA polling/Toggle Bit status detection, and 5 V ±10% supply tolerance.
Technical Context
The AT29C512-70JI implements a sector-erase architecture where each 128-byte sector is erased and programmed in a single internal cycle, using latched address/data and an embedded control timer. Its read interface mirrors standard EPROM behavior with dual-line chip enable (CE) and output enable (OE) control to prevent bus contention.
Programming requires no external high-voltage supply: all operations-including software data protection enable/disable, chip erase, and product identification-are executed via 5 V-only command sequences applied to specific address/data combinations (e.g., 5555h/2AAAh). Status detection relies on DATA polling (I/O7 complement) or Toggle Bit (I/O6 toggling) during program/erase cycles.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 512 Kbit (64K × 8), sufficient for boot code or configuration tables in resource-constrained embedded systems |
| Read Access Time | 70 ns maximum - enables direct execution from flash in 8-bit microcontrollers with ≤14 MHz bus clocks |
| Supply Voltage | 5 V ±10% - compatible with legacy 5 V logic families without level-shifting circuitry |
| Operating Temperature | –40°C to +85°C - qualified for industrial control, motor drives, and instrumentation environments |
| Endurance | >10,000 program/erase cycles per sector - supports infrequent firmware updates over product lifetime |
| Standby Current | 100 µA typical CMOS standby - reduces power in sleep-mode applications such as remote sensors |
| Program Cycle Time | 10 ms per sector - defines minimum interval between successive sector writes in field update routines |
Pinout & Package
AT29C512-70JI is available in 32-lead PLCC (32J) and TSOP (32T) packages. The industrial-grade variant uses the same pinout across both packages.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A15 | Address Inputs | 16-bit address bus supporting full 64K-word addressing; A7–A15 select sector, A0–A6 select byte within sector |
| I/O0–I/O7 | Bidirectional Data Bus | CMOS/TTL-compatible 8-bit data path; I/O7 used for DATA polling, I/O6 for Toggle Bit status monitoring |
| CE | Chip Enable | Active-low global device select; must be low for read, program, or identification modes |
| OE | Output Enable | Active-low output gate control; high-Z when high, enabling bus sharing with other peripherals |
| WE | Write Enable | Active-low control for byte load and program initiation; timing-critical for 150 µs inter-byte loading window |
| VCC | Power Supply | +5 V ±10% main supply; internal voltage sensing disables programming if below ~3.8 V |
| GND | Ground Reference | Signal and power ground return; decoupling capacitor required near VCC pin |
| NC | No Connect | Unbonded pins in PLCC/TSOP packages - must remain unconnected per datasheet |
Key Features
| Feature | Design Value |
|---|---|
| 5 V-only sector programming | Eliminates need for external 12 V programming supply, simplifying system-level reprogramming infrastructure |
| Hardware data protection | VCC sense, 5 ms power-on delay, and noise filtering prevent accidental writes during power transients or EMI events |
| Software data protection | Three-byte unlock sequence (5555h/2AAAh/A0h) required before each program cycle - prevents unintended firmware corruption |
| DATA polling & Toggle Bit | Dual asynchronous status reporting methods allow host MCU to poll I/O7 or I/O6 without fixed timeout delays |
| Single-cycle sector erase/program | Internal latching of 128-byte sector data frees address/data bus during 10 ms internal operation - improves system concurrency |
Applications
| Industrial PLC Firmware Storage | Automotive Body Control Module |
|---|---|
Use Scenario: Storing ladder logic firmware and I/O mapping tables in programmable logic controllers deployed in factory automation cabinets. IC Role / Device Role / Timing Role: Nonvolatile program memory providing deterministic 70 ns read access for real-time scan cycle execution. Use Value: Industrial temperature rating (–40°C to +85°C) and >10,000 endurance cycles ensure reliable operation across thermal cycling and multi-year deployments. | Use Scenario: Holding calibration data and feature-enable codes in body control units managing door locks, lighting, and HVAC subsystems. IC Role / Device Role / Timing Role: Secure configuration storage with software/hardware write protection preventing unauthorized parameter changes. Use Value: 5 V-only operation integrates directly with automotive 5 V power domains; DATA polling enables robust firmware update verification under variable supply conditions. |
| Medical Diagnostic Equipment | Networking Edge Router Boot Memory |
Use Scenario: Storing boot firmware and safety-critical diagnostic algorithms in portable ultrasound or patient monitor devices. IC Role / Device Role / Timing Role: Trusted boot source with hardware VCC-sense protection ensuring no inadvertent writes during brown-out conditions. Use Value: Low 100 µA standby current extends battery life in portable configurations; sector granularity allows selective firmware patching without full chip erase. | Use Scenario: Hosting bootloader and minimal OS image in enterprise edge routers requiring field-upgradable firmware without service interruption. IC Role / Device Role / Timing Role: In-system reprogrammable flash memory accessed via parallel bus during cold start and maintenance windows. Use Value: 10 ms sector program time enables rapid field updates; Toggle Bit status detection provides deterministic timing for automated update scripts. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AM29LV512-70JC | 3 V core / 5 V I/O; 70 ns access; 512 Kbit density; different command set and sector layout | Requires level translation for pure 5 V systems; lacks hardware VCC-sense protection | Preferred only in mixed-voltage designs where 3 V logic coexists with 5 V peripherals |
| SST39VF512-70-4C-NHE | 3 V supply only; 70 ns access; 512 Kbit; byte-write capability (no sector constraint) | Not compatible with 5 V-only systems; no industrial temperature grade available | Only suitable for new 3 V designs prioritizing byte-level updates over legacy 5 V integration |
Compared with AM29LV512-70JC and SST39VF512-70-4C-NHE, the AT29C512-70JI uniquely delivers true 5 V-only operation with integrated VCC-sense protection and industrial temperature qualification - critical for retrofitting legacy 5 V controller boards without redesigning power or interface circuitry.
Availability
AT29C512-70JI is available at Aetrix Electronics and suitable for industrial control systems, automotive body electronics, medical diagnostics equipment, and networking infrastructure requiring stable component supply across extended product lifecycles.
Supply support for AT29C512-70JI includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Atmel Corporation (now part of Microchip Technology) is a semiconductor manufacturer specializing in microcontrollers, nonvolatile memory, and secure authentication solutions.
The AT29C512-70JI belongs to Atmel's legacy parallel Flash memory product line, designed specifically for 5 V embedded systems needing in-field firmware upgrades without high-voltage programming infrastructure.
FAQ
What is the operating temperature range specified for the AT29C512-70JI?
The AT29C512-70JI is rated for industrial operation from –40°C to +85°C. This specification is confirmed in the Ordering Information table and DC Operating Range section of the datasheet, making it suitable for deployment in harsh environments such as factory floors, vehicle engine compartments, and outdoor telecommunications enclosures where ambient temperatures exceed commercial-grade limits.
Does the AT29C512-70JI require external high-voltage circuitry for programming?
No, the AT29C512-70JI does not require external high-voltage circuitry. All programming, erasure, and protection functions are executed using only the 5 V supply. Internal voltage sensing and timing circuits handle sector erase and program operations autonomously after the correct 5 V-only command sequences are issued to addresses 5555h and 2AAAh.
How is end-of-program detection implemented in the AT29C512-70JI?
The AT29C512-70JI supports two independent end-of-program detection methods: DATA polling (monitoring complement state on I/O7) and Toggle Bit (observing toggling on I/O6). Both methods operate asynchronously and can be initiated at any point during the 10 ms internal program cycle, eliminating reliance on fixed timeout values in host firmware.
What package types are available for the AT29C512-70JI?
The AT29C512-70JI is offered in two package variants: 32-lead PLCC (32J) and 32-lead TSOP (32T). Both share identical pinouts and electrical characteristics. The PLCC version provides through-hole mounting compatibility, while the TSOP offers surface-mount footprint advantages for space-constrained industrial PCBs.
Can the AT29C512-70JI be used as a direct replacement for EPROMs like the 27C512?
Yes, the AT29C512-70JI is pin-compatible and functionally compatible with 27C512 EPROMs in read mode, supporting identical address/data bus timing and CE/OE/WE control signals. However, unlike EPROMs, it supports in-system reprogramming without UV erasure - enabling field firmware updates without component removal.
AT29C512-70JI Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 32-LCC (J-Lead)
- Packaging:
- Tube
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH
- Memory Size:
- 512Kbit
- Memory Organization:
- 64K x 8
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 10ms
- Access Time:
- 70 ns
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TC)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 32-PLCC (13.97x11.43)
AT29C512-70JI FAQ
1.How can I place an order for AT29C512-70JI through Aetrix?
Please submit a Request for Quotation (RFQ) for AT29C512-70JI on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AT29C512-70JI reliable?
The price and inventory of AT29C512-70JI are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AT29C512-70JI is usually 5 days.
3.What payment methods are accepted for AT29C512-70JI?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AT29C512-70JI transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AT29C512-70JI?
AT29C512-70JI orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AT29C512-70JI order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AT29C512-70JI?
For technical support, including AT29C512-70JI datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AT29C512-70JI requirements.
6.How does Aetrix verify that AT29C512-70JI is sourced from the original manufacturer or authorized distributors?
All AT29C512-70JI products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AT29C512-70JI meets industry standards.
7.What is the process for return or replacement of AT29C512-70JI?
All AT29C512-70JI units undergo pre-shipment inspection (PSI). If there is an issue with AT29C512-70JI, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AT29C512-70JI part is unused and in its original packaging.
Return procedure for AT29C512-70JI:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AT29C512-70JI Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
