My Inquiry
My Account
Microchip Technology AT29C512-70JU-T
- Part No.:
- AT29C512-70JU-T
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 32-LCC (J-Lead)
- Datasheet:
-
AT29C512-70JU-T.pdf
- Description:
- IC FLASH 512KBIT PARALLEL 32PLCC
- Quantity:
- Payment:
- Shipping:
Inventory:1,122
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AT29C512-70JU-T from Atmel is a 512 Kbit (64K × 8) in-system reprogrammable Flash memory IC with 70 ns read access time, single 5V ± 5% supply operation, and sector-based programming of 512 × 128-byte sectors. It features hardware and software data protection, DATA polling and toggle-bit program completion detection, and CMOS/TTL-compatible I/O for embedded microcontroller systems requiring field-upgradable nonvolatile storage.
For engineers reviewing the AT29C512-70JU-T datasheet, AT29C512-70JU-T pinout, AT29C512-70JU-T application, or AT29C512-70JU-T equivalent, this page delivers verified technical context, real-world timing behavior, sector-program constraints, protection mechanisms, and validated alternative options for industrial firmware storage designs.
Technical Context
The AT29C512-70JU-T implements a sector-erase-and-program architecture where each 128-byte sector must be fully loaded before internal auto-erase and programming commence. Address latching occurs on the falling edge of CE or WE, and data latching on the first rising edge-enabling bus release during load cycles.
It supports dual program enable paths: hardware-controlled via VCC sense (≥3.8 V), power-on delay (5 ms), and noise filtering (15 ns pulse rejection); and software-controlled via three-step command sequences for sector/whole-chip erase and data protection enable/disable. DATA polling on I/O7 and toggle-bit monitoring on I/O6 provide deterministic program cycle termination detection without external timers.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 512 Kbit (64K × 8), organized as 65,536 words × 8 bits - directly maps to standard 8-bit microcontroller data buses. |
| Read Access Time | 70 ns max - enables direct interface with 10–14 MHz microcontrollers without wait states. |
| Supply Voltage | 5.0 V ± 5% - eliminates need for external voltage regulators in legacy 5V system designs. |
| Active Current | 50 mA max at 5 MHz - compatible with standard 5V logic rail current budgets. |
| Standby Current | 300 µA CMOS standby - supports low-power sleep modes in battery-backed or energy-constrained systems. |
| Endurance | >10,000 program/erase cycles per sector - sufficient for firmware update logging and configuration storage over product lifetime. |
| Sector Size | 128 bytes per sector - balances granularity for partial updates against overhead of sector management in host firmware. |
Pinout & Package
AT29C512-70JU-T is packaged in a 32-lead Plastic J-Leaded Chip Carrier (PLCC), JEDEC MS-016 variation AE compliant, with 1.27 mm pitch and 12.45 mm × 14.95 mm body size. Pin 1 identifier is a corner chamfer.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A15 | Address Inputs | 16-bit address bus; A0–A6 select byte within 128-byte sector, A7–A15 select sector (0–511). |
| I/O0–I/O7 | Bidirectional Data Bus | 8-bit parallel data path; latched on WE/CE rising edge during byte load; outputs high-Z when CE or OE high. |
| CE | Chip Enable | Active-low chip select; must be low for read, program, or identification mode; inhibits all operations when high. |
| OE | Output Enable | Active-low output control; enables data output only when CE is also low; prevents bus contention in shared-memory systems. |
| WE | Write Enable | Active-low write strobe; initiates byte load and triggers internal program cycle after full sector load; must be high during reads. |
| VCC | Power Supply | +5.0 V ± 5% supply input; powers core logic and I/O buffers; VCC sense circuit disables programming if below 3.8 V. |
| GND | Ground Reference | Signal and power ground reference for all inputs, outputs, and internal circuitry. |
| NC | No Connect | Two unconnected pins (PLCC positions 15 and 31); must remain floating - no external connection or pull-up/down. |
Key Features
| Feature | Design Value |
|---|---|
| Single 5V-only reprogramming | Eliminates need for +12 V or +21 V programming supplies - simplifies system-level power design and reduces BOM count. |
| Internal program control timer | Automatically manages erase-and-program sequence after sector load - removes requirement for precise external timing control. |
| Hardware data protection | VCC sense, 5 ms power-on delay, and 15 ns noise filtering prevent spurious writes during brown-out or EMI events. |
| DATA polling on I/O7 | Enables polling-based program completion detection using standard read instructions - no dedicated status register or extra I/O lines needed. |
| Software data protection | Three-command unlock sequence (AAh/55h/A0h) required before any sector program - prevents accidental firmware corruption by host software bugs. |
Applications
| Industrial PLC Firmware Storage | Medical Device Configuration Memory |
|---|---|
Use Scenario: Storing field-upgradable ladder logic firmware and calibration tables in programmable logic controllers operating across -40°C to +85°C. IC Role / Device Role / Timing Role: Nonvolatile code and parameter storage with 70 ns read access enabling real-time scan-cycle execution. Use Value: Sector-level reprogramming allows incremental firmware patches without full device erase; 10,000-cycle endurance supports multi-year maintenance cycles. |
Use Scenario: Retaining user-configurable therapy parameters and device serialization data in portable diagnostic equipment with battery backup. IC Role / Device Role / Timing Role: Low-power (300 µA standby) persistent memory for critical settings that survive power loss. Use Value: Hardware write protection prevents corruption during power transitions; software lock adds layer of safety-critical firmware integrity control. |
| Automotive Body Control Module (BCM) | Legacy Industrial HMI Display Firmware |
Use Scenario: Holding vehicle-specific configuration profiles and diagnostic event logs in under-hood BCMs exposed to thermal cycling. IC Role / Device Role / Timing Role: 5V-tolerant CMOS/TTL I/O interfaces directly with legacy 8051 or PIC microcontrollers without level shifters. Use Value: PLCC package provides mechanical robustness for vibration-prone environments; green Pb/halide-free option meets automotive RoHS requirements. |
Use Scenario: Hosting boot code and GUI assets in panel-mounted HMIs using aging 5V microprocessor platforms. IC Role / Device Role / Timing Role: Drop-in EPROM replacement with identical pinout and read protocol - enables seamless migration from obsolete UV-erasable parts. Use Value: 70 ns access matches original EPROM timing; sector programming avoids full-chip erase delays during display asset updates. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AT29LV512-70JU | 3.0 V–3.6 V operation; 70 ns access; same 512 Kbit density and PLCC-32 package. | Designed for low-voltage systems; lacks 5V compatibility and hardware VCC-sense protection. | Select when migrating to 3.3 V platforms and board redesign permits voltage rail change. |
| MX29LV512CTTI-70G | 3.0 V–3.6 V supply; 70 ns access; 512 Kbit density; TSOP-32 package; supports CFI query mode. | Requires 3.3 V regulator and CFI-aware bootloader; no 5V tolerance or software protection algorithm compatibility. | Choose for higher-volume cost-sensitive designs where TSOP footprint and CFI standardization are priorities. |
Compared with AT29C512-70JU-T, AT29LV512-70JU requires full system voltage reduction but offers lower active power, while MX29LV512CTTI-70G mandates CFI initialization and lacks Atmel's software lock command set - making AT29C512-70JU-T uniquely suited for drop-in 5V legacy upgrades with robust data protection.
Availability
AT29C512-70JU-T is available at Aetrix Electronics and suitable for industrial PLC firmware storage, medical device configuration memory, and automotive body control module applications requiring stable component supply, long-lifecycle support, and green packaging compliance.
Supply support for AT29C512-70JU-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Atmel Corporation (now part of Microchip Technology) is a semiconductor manufacturer specializing in microcontrollers, nonvolatile memory, and secure authentication devices.
The AT29C512-70JU-T belongs to Atmel's legacy 5V Flash memory product line, designed specifically for in-system reprogrammability in industrial and automotive 5V embedded systems requiring field firmware updates without high-voltage programming infrastructure.
FAQ
What is the maximum operating temperature range for the AT29C512-70JU-T?
The AT29C512-70JU-T is rated for industrial temperature operation from -40°C to +85°C. This range is confirmed in the DC and AC Operating Range table (Section 6) and applies to all specified read, program, and standby performance parameters including the 70 ns access time and 50 mA active current.
Does the AT29C512-70JU-T support full-chip erase?
Yes, the AT29C512-70JU-T supports optional full-chip erase via a 6-byte software command sequence documented in Section 4.9 and Application Note "Software Chip Erase." This operation erases all 512 sectors simultaneously and is distinct from sector-based programming.
How does hardware data protection work on the AT29C512-70JU-T?
Hardware data protection on the AT29C512-70JU-T operates through four mechanisms: (1) VCC sense disabling programming below 3.8 V, (2) automatic 5 ms power-on delay before enabling writes, (3) inhibition if OE is low, CE is high, or WE is high, and (4) rejection of noise pulses <15 ns on WE or CE inputs - all defined in Section 4.5.
Can the AT29C512-70JU-T be used as a direct replacement for standard EPROMs?
Yes, the AT29C512-70JU-T is accessed identically to an EPROM during read operations: CE and OE low with WE high asserts data on I/O0–I/O7. Its 70 ns access time, 5V supply, and PLCC-32 footprint match common EPROMs like the 27C512, enabling drop-in replacement without hardware changes.
What is the purpose of the NC pins on the AT29C512-70JU-T PLCC package?
The AT29C512-70JU-T PLCC package has two NC (No Connect) pins - positions 15 and 31 per the 32-lead PLCC top view diagram (Section 2.1). These pins are internally unconnected and must remain floating; they serve mechanical or package-standardization purposes and carry no electrical function in the AT29C512-70JU-T.
AT29C512-70JU-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 32-LCC (J-Lead)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH
- Memory Size:
- 512Kbit
- Memory Organization:
- 64K x 8
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 10ms
- Access Time:
- 70 ns
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TC)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 32-PLCC (13.97x11.43)
AT29C512-70JU-T FAQ
1.How can I place an order for AT29C512-70JU-T through Aetrix?
Please submit a Request for Quotation (RFQ) for AT29C512-70JU-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AT29C512-70JU-T reliable?
The price and inventory of AT29C512-70JU-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AT29C512-70JU-T is usually 5 days.
3.What payment methods are accepted for AT29C512-70JU-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AT29C512-70JU-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AT29C512-70JU-T?
AT29C512-70JU-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AT29C512-70JU-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AT29C512-70JU-T?
For technical support, including AT29C512-70JU-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AT29C512-70JU-T requirements.
6.How does Aetrix verify that AT29C512-70JU-T is sourced from the original manufacturer or authorized distributors?
All AT29C512-70JU-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AT29C512-70JU-T meets industry standards.
7.What is the process for return or replacement of AT29C512-70JU-T?
All AT29C512-70JU-T units undergo pre-shipment inspection (PSI). If there is an issue with AT29C512-70JU-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AT29C512-70JU-T part is unused and in its original packaging.
Return procedure for AT29C512-70JU-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AT29C512-70JU-T Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
