My Inquiry
My Account
Microchip Technology AT29C512-70TI
- Part No.:
- AT29C512-70TI
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 32-TFSOP (0.724", 18.40mm Width)
- Datasheet:
-
AT29C512-70TI.pdf
- Description:
- IC FLASH 512KBIT PARALLEL 32TSOP
- Quantity:
- Payment:
- Shipping:
Inventory:1,783
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AT29C512-70TI from Atmel is a 512 Kbit (64K × 8) in-system programmable Flash memory IC designed for nonvolatile code and data storage in embedded microcontroller systems. It features 70 ns read access time, 5 V ±10% single-supply operation, sector-based reprogramming (512 sectors × 128 bytes), and hardware/software data protection. It is used in industrial firmware update modules requiring reliable, field-reprogrammable storage.
For engineers reviewing the AT29C512-70TI datasheet, AT29C512-70TI pinout, AT29C512-70TI application, or AT29C512-70TI equivalent, key selection criteria include its 70 ns access time, industrial temperature range (–40°C to +85°C), TSOP-32 package, sector erase architecture, and compatibility with standard 5 V microcontroller buses.
Technical Context
The AT29C512-70TI implements a sector-programmable Flash architecture where each 128-byte sector is erased and programmed in a single internal cycle. It uses address latching during byte load operations and supports DATA polling (I/O7 complement) and toggle-bit (I/O6) methods for program completion detection.
Its dual-line chip enable (CE) and output enable (OE) control enables bus contention avoidance in shared-memory systems, while hardware protection includes VCC sense (<3.8 V inhibits programming), 5 ms power-on delay, and noise filtering on WE/CE inputs.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 512 Kbit (64K × 8), sufficient for boot code or configuration tables in mid-complexity MCU systems |
| Read Access Time | 70 ns maximum - enables direct execution from flash in 10–15 MHz microcontroller systems |
| Supply Voltage | 5 V ±10% - eliminates need for dedicated programming voltage; compatible with legacy 5 V logic rails |
| Sector Size | 128 bytes per sector - balances granularity of updates with overhead of sector management firmware |
| Endurance | >10,000 program/erase cycles per sector - supports frequent field firmware patching in industrial controllers |
| Standby Current | 100 µA (CMOS) - suitable for low-power modes in battery-backed or energy-conscious designs |
| Operating Temperature | –40°C to +85°C - qualified for industrial-grade embedded applications without derating |
Pinout & Package
AT29C512-70TI is packaged in a 32-lead Thin Small Outline Package (TSOP, Type I, 8 mm × 20 mm, JEDEC MO-142 BD), pin-compatible with industry-standard 32-pin Flash memory footprints.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A15 | Address Inputs | 16-bit address bus supporting full 64K-word addressing; A7–A15 define sector, A0–A6 define byte within sector |
| I/O0–I/O7 | Bidirectional Data Bus | 8-bit CMOS/TTL-compatible data path; carries loaded sector data and returns polled status (I/O6 toggle, I/O7 complement) |
| CE | Chip Enable | Active-low global device select; must be low for read, program, or identification mode; high disables outputs to high-Z |
| OE | Output Enable | Active-low output gate; used with CE for read access; high disables outputs regardless of CE state |
| WE | Write Enable | Active-low control for byte loading and sector programming; timing-critical for 150 µs inter-byte window during sector load |
| VCC | Power Supply | +5 V ±10% supply; powers core logic and I/O buffers; VCC sense circuitry prevents programming below ~3.8 V |
| GND | Ground Reference | Signal and power return; decoupling required near VCC pin due to 50 mA active current |
| NC | No Connect | Two pins (TSOP pins 6 and 9) are unconnected; must remain floating or tied to GND per layout guidelines |
Key Features
| Feature | Design Value |
|---|---|
| Single 5 V Reprogramming | Eliminates need for external 12 V programming supply - simplifies system power design and enables in-field firmware updates |
| Hardware Data Protection | VCC sensing, 5 ms power-on delay, and noise filtering prevent accidental writes during brown-out or EMI events |
| Software Data Protection | Three-byte unlock sequence (5555h/2AAAh/A0h) required before any sector write - prevents unintended overwrites by corrupted firmware |
| DATA Polling & Toggle Bit | Real-time, bus-compatible status reporting via I/O7 complement or I/O6 toggling - avoids fixed delays and enables deterministic firmware timing |
| Fast Sector Program Cycle | 10 ms typical - enables rapid sector-level updates without blocking system operation for extended periods |
Applications
| Industrial PLC Firmware Storage | Medical Device Configuration Memory |
|---|---|
Use Scenario: Storing firmware images and calibration parameters in programmable logic controllers deployed in factory automation environments. IC Role / Device Role / Timing Role: Nonvolatile code storage with in-system reprogrammability; provides 70 ns read access for real-time instruction fetch and supports sector-level updates during maintenance windows. Use Value: Enables remote firmware patches without hardware replacement; industrial temperature rating ensures reliability in uncontrolled cabinet environments. |
Use Scenario: Holding device-specific calibration coefficients and safety-critical configuration data in portable diagnostic equipment. IC Role / Device Role / Timing Role: Secure, endurance-rated data retention element; software/hardware protection prevents corruption during power cycling or ESD events. Use Value: >10,000 erase/write cycles support lifetime recalibration; 100 µA standby current extends battery life between service intervals. |
| Telecom Base Station Boot Loader | Automotive Body Control Module (BCM) Parameter Table |
Use Scenario: Hosting boot loader code and fail-safe recovery images in outdoor telecom infrastructure units exposed to wide thermal swings. IC Role / Device Role / Timing Role: Primary boot memory with fast read access and robust sector erase - ensures deterministic startup even after unexpected power loss. Use Value: 70 ns access time meets tight boot timing budgets; –40°C to +85°C rating guarantees operation in rooftop enclosures. |
Use Scenario: Storing vehicle-specific lighting profiles, door lock logic, and sensor thresholds in automotive BCMs. IC Role / Device Role / Timing Role: Field-updatable parameter store; sector architecture allows updating lighting logic without rewriting entire firmware image. Use Value: 128-byte sector granularity minimizes update time and flash wear; 5 V compatibility integrates seamlessly with legacy automotive MCU buses. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AM29LV512-70EC | 3 V core with 5 V I/O; 70 ns access; 512 Kbit density; requires VPP = 12 V for programming | Designed for mixed-voltage systems; not 5 V-only compatible | Select only if migrating to lower-voltage core logic while retaining 5 V interface compatibility |
| SST39VF512-70-4C-NHE | 3.3 V supply; 70 ns access; 512 Kbit; no VPP required; supports byte-write without sector erase | Optimized for newer 3.3 V embedded platforms; lacks hardware VCC-sense protection | Prefer for new 3.3 V designs requiring finer-grained writes; not drop-in compatible with 5 V systems |
Compared with AM29LV512-70EC and SST39VF512-70-4C-NHE, the AT29C512-70TI uniquely delivers true 5 V-only operation with integrated hardware write inhibition and industrial temperature qualification - making it the only option among the three that requires no voltage translation or external protection circuitry in legacy 5 V controller designs.
Availability
AT29C512-70TI is available at Aetrix Electronics and suitable for industrial PLC firmware storage, medical device configuration memory, and telecom base station boot loader applications requiring stable component supply across extended product lifecycles.
Supply support for AT29C512-70TI includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Atmel Corporation (now part of Microchip Technology) is a semiconductor manufacturer specializing in microcontrollers, nonvolatile memory, and secure authentication devices.
The AT29C512 belongs to Atmel's legacy parallel-interface Flash memory product line, engineered for cost-effective, field-upgradable code and data storage in industrial and automotive control systems using standard 5 V microprocessor buses.
FAQ
What is the operating temperature range for the AT29C512-70TI?
The AT29C512-70TI is rated for industrial temperature operation from –40°C to +85°C. This specification is confirmed in the Ordering Information table and DC Operating Range section of the official datasheet (Rev. 0456F). The "I" suffix in the part number explicitly denotes industrial grade, distinguishing it from commercial-grade variants like AT29C512-70JC.
Does the AT29C512-70TI require a high-voltage programming supply?
No, the AT29C512-70TI operates with a single 5 V ±10% supply for both read and program operations. Its "5-volt Only Reprogramming" feature eliminates the need for external 12 V (VPP) programming voltages. Hardware protection circuits monitor VCC and inhibit programming if it falls below ~3.8 V, ensuring safe operation under brown-out conditions.
How is sector programming performed on the AT29C512-70TI?
Sector programming on the AT29C512-70TI loads 128 bytes into an internal latch using byte-load cycles (WE or CE pulses), then automatically erases and programs the entire sector. A7–A15 define the sector address; A0–A6 define the byte offset. Each byte must be loaded within 150 µs of the prior byte's WE/CE rising edge, after which the 10 ms internal programming cycle begins.
What methods does the AT29C512-70TI provide to detect end-of-program?
The AT29C512-70TI supports two hardware-confirmed methods: DATA polling (reading I/O7 returns complement of last loaded byte until completion) and Toggle Bit (I/O6 toggles between 0 and 1 during programming and stops when complete). Both methods are specified in the datasheet's "DATA POLLING" and "TOGGLE BIT" sections and require no external timers.
Is the AT29C512-70TI pin-compatible with other 32-pin Flash memories?
The AT29C512-70TI in TSOP-32 (32T) package follows JEDEC MO-142 BD mechanical dimensions and uses standard parallel Flash pinout (A0–A15, I/O0–I/O7, CE/OE/WE, VCC/GND). While functional compatibility depends on timing and command sets, its physical footprint matches common 32-pin Flash packages - enabling PCB reuse where timing margins and software drivers align.
AT29C512-70TI Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 32-TFSOP (0.724", 18.40mm Width)
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH
- Memory Size:
- 512Kbit
- Memory Organization:
- 64K x 8
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 10ms
- Access Time:
- 70 ns
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TC)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 32-TSOP
AT29C512-70TI FAQ
1.How can I place an order for AT29C512-70TI through Aetrix?
Please submit a Request for Quotation (RFQ) for AT29C512-70TI on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AT29C512-70TI reliable?
The price and inventory of AT29C512-70TI are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AT29C512-70TI is usually 5 days.
3.What payment methods are accepted for AT29C512-70TI?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AT29C512-70TI transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AT29C512-70TI?
AT29C512-70TI orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AT29C512-70TI order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AT29C512-70TI?
For technical support, including AT29C512-70TI datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AT29C512-70TI requirements.
6.How does Aetrix verify that AT29C512-70TI is sourced from the original manufacturer or authorized distributors?
All AT29C512-70TI products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AT29C512-70TI meets industry standards.
7.What is the process for return or replacement of AT29C512-70TI?
All AT29C512-70TI units undergo pre-shipment inspection (PSI). If there is an issue with AT29C512-70TI, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AT29C512-70TI part is unused and in its original packaging.
Return procedure for AT29C512-70TI:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AT29C512-70TI Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
