My Inquiry
My Account
Microchip Technology AT29C512-70TU-T
- Part No.:
- AT29C512-70TU-T
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 32-TFSOP (0.724", 18.40mm Width)
- Datasheet:
-
AT29C512-70TU-T.pdf
- Description:
- IC FLASH 512KBIT PARALLEL 32TSOP
- Quantity:
- Payment:
- Shipping:
Inventory:2,485
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AT29C512-70TU-T from Atmel is a 512 Kbit (64K × 8) CMOS Flash memory IC designed for in-system reprogrammability with 70 ns read access time, single 5V ±10% supply operation, and sector-based programming of 512 × 128-byte sectors. It delivers 50 mA active current, 300 µA CMOS standby current, and >10,000 program/erase endurance cycles, targeting embedded firmware storage in industrial controllers and legacy microcontroller systems.
For engineers reviewing the AT29C512-70TU-T datasheet, AT29C512-70TU-T pinout, AT29C512-70TU-T application, or AT29C512-70TU-T equivalent, key selection considerations include its TSOP-32 package, hardware/software data protection, DATA polling and toggle-bit end-of-program detection, and compatibility with EPROM-style read interfaces in space-constrained industrial designs.
Technical Context
The AT29C512-70TU-T implements sector-erase architecture with internal address/data latches for 128-byte loads, automatic erase-and-program sequencing controlled by an on-chip timer, and dual-line chip enable (CE) and output enable (OE) logic to prevent bus contention during reads. Its timing-critical byte-load protocol requires successive WE or CE transitions within 150 µs to complete sector loading before initiating internal programming.
Hardware data protection includes VCC sense (<3.8 V inhibits programming), 5 ms power-on delay, noise filtering (<15 ns pulses ignored), and CE/OE/WE state monitoring; software protection uses a three-command sequence (AAh/55h/A0h) to enable/disable write access per sector. Product identification mode returns manufacturer code 1Fh and device code 5Dh via software or hardware entry.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Size | 512 Kbit (64K × 8), directly replaceable for EPROMs in legacy 8-bit microcontroller boot memory |
| Read Access Time | 70 ns - enables direct interface with 12–14 MHz 8051 or Z80 derivatives without wait states |
| Supply Voltage | 5 V ±10% - eliminates need for dedicated programming voltage regulators in system design |
| Sector Architecture | 512 sectors × 128 bytes - allows fine-grained firmware updates without full-chip erasure |
| Program Cycle Time | 10 ms per sector - deterministic timing supports predictable firmware update scheduling |
| Endurance | >10,000 program/erase cycles per sector - sufficient for field firmware upgrades over 5+ year product life |
| Standby Current | 300 µA CMOS - critical for low-power industrial sensors and battery-backed control modules |
Pinout & Package
AT29C512-70TU-T is packaged in a 32-lead Thin Small Outline Package (TSOP, Type 1), 8 mm × 20 mm body, compliant with JEDEC MO-142 BD. Pin 1 identifier located at top-left corner when notch faces upward.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A15 | Address Inputs | 16-bit address bus; A7–A15 select sector (0–511), A0–A6 select byte within sector |
| I/O0–I/O7 | Bidirectional Data Bus | 8-bit parallel data path; supports DATA polling on I/O7 and toggle-bit detection on I/O6 |
| CE | Chip Enable | Active-low global enable; must be low for read, program, or identification modes |
| OE | Output Enable | Active-low output control; high-Z when high, required high during program cycles |
| WE | Write Enable | Active-low command strobe; used with CE to initiate byte loads and sector programming |
| VCC | Power Supply | +5 V ±10% main supply; powers core logic and I/O buffers |
| GND | Ground | Reference return for all signals and power; decoupling capacitor required near pin |
| NC | No Connect | Two unconnected pins (A12 and A15 positions in TSOP layout); must remain floating |
Key Features
| Feature | Design Value |
|---|---|
| Single 5V-only reprogramming | Eliminates need for +12 V programming supplies, reducing BOM cost and PCB complexity |
| Internal program control timer | Removes external timing components; guarantees consistent 10 ms sector programming duration |
| DATA polling & toggle-bit detection | Enables real-time program status monitoring without dedicated status registers or interrupts |
| Hardware + software data protection | Prevents accidental writes during power-up/down or noise events while allowing secure field updates |
| Green (Pb/Halide-free) packaging | Meets RoHS Directive 2011/65/EU and JEDEC J-STD-609A Class 2a moisture sensitivity |
Applications
| Industrial PLC Firmware Storage | Legacy Microcontroller Boot Memory |
|---|---|
|
Use Scenario: Storing firmware images and configuration tables in programmable logic controllers operating continuously in factory environments (-40°C to +85°C). IC Role / Device Role / Timing Role: Nonvolatile boot memory mapped to CPU address space; provides 70 ns read access to support real-time scan cycle execution. Use Value: Sector erase capability enables field-upgradable ladder logic without full system shutdown or external programmer. |
Use Scenario: Replacing UV-erasable EPROMs in aging 8-bit embedded systems (e.g., Z80, 8051) where board space and power budget are constrained. IC Role / Device Role / Timing Role: Drop-in EPROM replacement with identical read interface timing and pinout compatibility in TSOP-32 footprint. Use Value: Eliminates UV window and eraser equipment; enables in-circuit firmware patching using existing system-level programming logic. |
| Medical Device Configuration Storage | Telecom Line Card Parameter Tables |
|
Use Scenario: Holding calibration coefficients and safety-critical operational parameters in Class II medical instruments requiring long-term data retention. IC Role / Device Role / Timing Role: Secure nonvolatile storage with hardware VCC-sense and software lock; accessed only during initialization or service mode. Use Value: >10,000 endurance cycles support lifetime recalibration; 300 µA standby current extends battery backup runtime. |
Use Scenario: Storing line-specific DSP coefficients and protocol stack parameters in carrier-grade DSLAM and xDSL line cards. IC Role / Device Role / Timing Role: Field-updatable parameter memory accessed via microcontroller during line provisioning or fault recovery. Use Value: Sector-based updates allow per-line tuning without disrupting adjacent channels; green packaging meets telecom environmental compliance. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AT29C512-70JU | Same die, PLCC-32 package instead of TSOP-32; 32J footprint vs. 32T; higher thermal resistance (θJA ≈ 55°C/W vs. 45°C/W) | Preferred for through-hole prototyping or high-vibration environments where lead strength matters | Select AT29C512-70JU if board layout uses PLCC socket or requires mechanical robustness over density |
| MX29LV512CTTI-70G | 3 V core + 5 V I/O; 70 ns access but lower 30 mA active current; supports CFI query; no hardware VCC-sense protection | Targets newer 3.3 V systems with mixed-voltage I/O; lacks Atmel's dual-line CE/OE bus contention control | Select MX29LV512CTTI-70G only if migrating to 3.3 V supply and accepting reduced hardware write protection |
Compared with AT29C512-70JU, the AT29C512-70TU-T offers superior board-area efficiency and thermal performance in surface-mount production; versus MX29LV512CTTI-70G, it retains full 5 V compatibility and stronger hardware-level write inhibition for legacy industrial deployments.
Availability
AT29C512-70TU-T is available at Aetrix Electronics and suitable for industrial PLC firmware storage, legacy microcontroller boot memory, and medical device configuration storage requiring stable component supply across extended product lifecycles.
Supply support for AT29C512-70TU-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Atmel Corporation (now part of Microchip Technology) is a U.S.-based semiconductor company specializing in microcontrollers, Flash memory, and secure authentication ICs for industrial and automotive markets.
The AT29C512 belongs to Atmel's legacy parallel Flash memory product line, engineered specifically for drop-in EPROM replacement in 5 V embedded systems with emphasis on in-system reprogrammability and industrial temperature reliability.
FAQ
What is the maximum operating temperature range for the AT29C512-70TU-T?
The AT29C512-70TU-T is rated for industrial temperature operation from -40°C to +85°C. This range is validated per the DC and AC operating specifications in the official Atmel datasheet (document 0456i–FLASH–9/08), and applies to all electrical parameters including 70 ns access time, 50 mA active current, and 300 µA standby current. Operation outside this range may result in timing violations or data retention loss.
Does the AT29C512-70TU-T require high-voltage programming signals?
No, the AT29C512-70TU-T operates with single 5 V ±10% supply only-no high-voltage programming signals are needed. Programming is initiated using standard 5 V logic levels on CE, WE, and OE pins, with command sequences (e.g., AAh/55h/A0h) executed on the data bus. This eliminates external HV generators and simplifies integration into 5 V systems.
How does DATA polling work on the AT29C512-70TU-T?
During programming, reading the last loaded byte returns the complement of I/O7 until completion; once valid data appears on I/O7, the program cycle has finished. This allows the host microcontroller to poll I/O7 without halting other operations. The AT29C512-70TU-T supports polling at any time during tWC (10 ms), and the feature is electrically verified per datasheet section 4.7.
Can the AT29C512-70TU-T be used as a direct replacement for EPROMs like the 27C512?
Yes, the AT29C512-70TU-T is pin-compatible and functionally compatible with 27C512 EPROMs in read mode: identical 32-pin TSOP footprint, same A0–A15/I/O0–I/O7/CE/OE/WE signal mapping, and EPROM-like read timing. However, write operations require software command sequences-not UV erasure-making it a functional upgrade rather than blind drop-in for programming.
What is the sector size and total number of sectors in the AT29C512-70TU-T?
The AT29C512-70TU-T contains 512 sectors, each 128 bytes wide, totaling 65,536 bytes (512 Kbit). Sector addressing uses A7–A15, while A0–A6 select the byte within the sector. This architecture is confirmed in the "Description" and "Device Operation" sections of the official datasheet and enables granular firmware updates without erasing unrelated memory regions.
AT29C512-70TU-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 32-TFSOP (0.724", 18.40mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH
- Memory Size:
- 512Kbit
- Memory Organization:
- 64K x 8
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 10ms
- Access Time:
- 70 ns
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TC)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 32-TSOP
AT29C512-70TU-T FAQ
1.How can I place an order for AT29C512-70TU-T through Aetrix?
Please submit a Request for Quotation (RFQ) for AT29C512-70TU-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AT29C512-70TU-T reliable?
The price and inventory of AT29C512-70TU-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AT29C512-70TU-T is usually 5 days.
3.What payment methods are accepted for AT29C512-70TU-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AT29C512-70TU-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AT29C512-70TU-T?
AT29C512-70TU-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AT29C512-70TU-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AT29C512-70TU-T?
For technical support, including AT29C512-70TU-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AT29C512-70TU-T requirements.
6.How does Aetrix verify that AT29C512-70TU-T is sourced from the original manufacturer or authorized distributors?
All AT29C512-70TU-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AT29C512-70TU-T meets industry standards.
7.What is the process for return or replacement of AT29C512-70TU-T?
All AT29C512-70TU-T units undergo pre-shipment inspection (PSI). If there is an issue with AT29C512-70TU-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AT29C512-70TU-T part is unused and in its original packaging.
Return procedure for AT29C512-70TU-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AT29C512-70TU-T Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
