My Inquiry
My Account
Microchip Technology AT29C512-90TU-T
- Part No.:
- AT29C512-90TU-T
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 32-TFSOP (0.724", 18.40mm Width)
- Datasheet:
-
AT29C512-90TU-T.pdf
- Description:
- IC FLASH 512KBIT PARALLEL 32TSOP
- Quantity:
- Payment:
- Shipping:
Inventory:1,321
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
AT29C512-90TU-T from Atmel is a 512 Kbit (64K × 8) CMOS Flash memory IC designed for in-system reprogrammability with single 5V ±10% supply, 90 ns read access time, and sector-based programming of 512 sectors (128 bytes/sector). It supports DATA polling and toggle-bit end-of-program detection and is used in embedded firmware storage, industrial controller boot code retention, and legacy system BIOS replacement.
For engineers reviewing the AT29C512-90TU-T datasheet, AT29C512-90TU-T pinout, AT29C512-90TU-T application, or AT29C512-90TU-T equivalent, key selection criteria include 5V-only operation, sector erase granularity, hardware/software data protection, and compatibility with standard parallel memory bus interfaces in industrial temperature range (-40°C to +85°C).
Technical Context
The AT29C512-90TU-T implements a parallel-interface Flash architecture with dual-line chip enable (CE) and output enable (OE) control for bus contention avoidance. Its internal program control timer manages automatic sector erase and write cycles without external high-voltage support.
It features both hardware-level VCC sense (inhibit below 3.8 V), noise filtering on WE/CE inputs (<15 ns pulses ignored), and software-controlled data protection via three-byte unlock sequences (AAh/55h/A0h for enable; AAh/55h/80h/AAh/55h/20h for disable), ensuring robust immunity to inadvertent writes during power transitions or noise events.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Size | 512 Kbit (64K × 8), sufficient for full boot firmware images in legacy microcontroller systems |
| Read Access Time | 90 ns max - meets timing requirements for 10 MHz CPU bus interfaces |
| Supply Voltage | 5 V ±10% - eliminates need for dedicated programming voltage regulators |
| Active Current | 50 mA max - compatible with standard 5V logic rail current budgets |
| Standby Current | 300 µA CMOS - enables low-power hold mode in battery-backed applications |
| Endurance | >10,000 program/erase cycles per sector - supports field firmware updates over product lifetime |
| Operating Temp | -40°C to +85°C - qualified for industrial-grade embedded deployment |
Pinout & Package
AT29C512-90TU-T is packaged in a 32-lead Thin Small Outline Package (TSOP Type I, package code 32T), compliant with JEDEC MO-142 BD, measuring 20.0 mm × 8.0 mm × 1.2 mm (max height), with gull-wing leads and 0.5 mm pitch.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A15 | Address Inputs | 16-bit address bus supporting full 64K-word addressing; A7–A15 select sector, A0–A6 select byte within sector |
| I/O0–I/O7 | Bidirectional Data Bus | 8-bit parallel interface; latches data during sector load; supports DATA polling on I/O7 and toggle-bit detection on I/O6 |
| CE | Chip Enable | Active-low device select; must be low for read, program, or identification modes; inhibits programming when high |
| OE | Output Enable | Active-low output control; high-Z state when high; required high during program cycles to prevent bus conflict |
| WE | Write Enable | Active-low control for byte loading and sector programming; timing-critical pulse width (≥90 ns) triggers internal latch and program sequence |
| VCC | Power Supply | +5 V ±10% main supply; powers core logic and I/O buffers; VCC sense circuitry disables programming if below ~3.8 V |
| GND | Ground Reference | Signal and power return path; decoupling capacitor placement critical for stable 90 ns read timing |
| NC | No Connect | Two unconnected pins (pins 15 and 16 in TSOP layout); must remain floating - no external connection permitted |
Key Features
| Feature | Design Value |
|---|---|
| Single 5V Reprogramming | Eliminates need for +12 V programming supplies - simplifies board design and reduces BOM cost |
| Sector Program Architecture | Enables partial rewrites: only modified 128-byte sectors require erasure, preserving adjacent firmware integrity |
| Hardware Data Protection | VCC sense, 5 ms power-on delay, and noise filtering prevent spurious writes during brown-out or EMI events |
| Software Data Protection | Configurable lock/unlock via documented 3-byte command sequences - prevents accidental firmware corruption in deployed systems |
| DATA Polling & Toggle Bit | Allows real-time program completion detection without external timers or status registers - reduces host CPU overhead |
Applications
| Industrial PLC Firmware Storage | Legacy PC BIOS Retention |
|---|---|
Use Scenario: Storing configuration logic and runtime firmware in programmable logic controllers operating in factory-floor environments with wide temperature swings and electrical noise. IC Role / Device Role / Timing Role: Nonvolatile program memory providing deterministic 90 ns read access to instruction fetch paths of 8/16-bit MCUs. Use Value: Sector-level reprogrammability allows field updates without removing the device; 300 µA standby current extends uptime during maintenance windows. | Use Scenario: Holding boot firmware in older desktop motherboards and embedded x86 systems where socketed EPROMs are being replaced with in-system programmable alternatives. IC Role / Device Role / Timing Role: Drop-in replacement for 27C512 EPROMs using identical pinout and timing-compatible CE/OE/WE control signals. Use Value: Eliminates UV erasers and external programmers; 5V-only operation integrates seamlessly into existing 5V motherboard power domains. |
| Telecom Line Card Boot Code | Medical Device Calibration Data |
Use Scenario: Storing initialization routines and protocol stacks on telecom line cards requiring hot-swap capability and long-term data retention under continuous operation. IC Role / Device Role / Timing Role: Primary boot memory accessed at power-up by DSP or ARM-based controllers; supports fast 90 ns reads during cold start. Use Value: Hardware data protection ensures immunity to power glitches during card insertion/removal; >10,000 endurance cycles accommodate periodic field calibration updates. | Use Scenario: Retaining calibrated sensor coefficients and safety-critical configuration parameters in Class II medical instruments subject to regulatory traceability requirements. IC Role / Device Role / Timing Role: Secure nonvolatile storage with dual-layer protection (hardware VCC sense + software lock) preventing unauthorized or accidental parameter modification. Use Value: Software data protection sequence (AAh/55h/A0h) provides auditable write-enable mechanism; green Pb/halide-free packaging meets IEC 61000-6-4 compliance. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| AM29LV512-90ED | 3.3 V core with 5 V I/O tolerance; 90 ns read; 12 V programming not required but requires VPP pin for some operations | Designed for mixed-voltage systems; lacks native 5 V-only simplicity and identical TSOP pinout | Choose only if migrating to lower-voltage logic families; requires PCB redesign for VPP routing and level-shifting |
| MX29LV512CTTI-90G | 3.3 V supply; 90 ns read; software-controlled sector protection; different unlock sequence (60h/D0h) | Optimized for newer 3.3 V embedded platforms; incompatible 5 V bus signaling and timing margins | Select when upgrading to modern low-power designs; not a drop-in replacement due to voltage and command-set mismatch |
Compared with AM29LV512-90ED and MX29LV512CTTI-90G, the AT29C512-90TU-T uniquely delivers true 5V-only operation with zero external high-voltage support, identical TSOP-32 pin compatibility with legacy EPROMs, and proven industrial temperature reliability - making it the optimal choice for maintaining or extending life of existing 5V systems.
Availability
AT29C512-90TU-T is available at Aetrix Electronics and suitable for industrial PLC firmware storage, legacy PC BIOS retention, and telecom line card boot code applications requiring stable component supply across extended product lifecycles.
Supply support for AT29C512-90TU-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Atmel Corporation (now part of Microchip Technology) is a semiconductor company specializing in microcontrollers, Flash memory, and secure authentication devices for industrial, automotive, and consumer applications.
The AT29C512 belongs to Atmel's parallel-interface Flash memory product line, engineered specifically for seamless 5V EPROM replacement in legacy systems requiring in-system reprogrammability without hardware modifications.
FAQ
What is the maximum read access time specified for the AT29C512-90TU-T?
The AT29C512-90TU-T has a maximum read access time of 90 ns, measured from address valid to valid data on I/O0–I/O7 under industrial temperature conditions (-40°C to +85°C) and 5 V ±10% supply. This value is guaranteed and tested per AC Read Characteristics table in the official datasheet, enabling reliable integration with 10 MHz bus systems.
Does the AT29C512-90TU-T require high-voltage programming signals?
No, the AT29C512-90TU-T does not require high-voltage programming signals. It operates with single 5 V ±10% supply for both read and program functions. Programming is initiated using standard 5 V logic levels and specific software command sequences - eliminating the need for +12 V VPP or external programming hardware.
How many sectors does the AT29C512-90TU-T contain, and what is the size of each sector?
The AT29C512-90TU-T contains 512 sectors, each consisting of 128 bytes. This sector structure enables granular reprogramming: only the affected 128-byte block needs to be erased and rewritten, preserving all other data in the 512 Kbit memory array without full-chip erasure.
What package type is used for the AT29C512-90TU-T, and is it lead-free?
The AT29C512-90TU-T uses a 32-lead Thin Small Outline Package (TSOP Type I, package code 32T), and it is offered in a green (Pb/halide-free) packaging option compliant with RoHS directives. The package dimensions are 20.0 mm × 8.0 mm × 1.2 mm max height, with 0.5 mm lead pitch.
Can the AT29C512-90TU-T be used as a direct replacement for the 27C512 EPROM?
Yes, the AT29C512-90TU-T is functionally and pin-compatible with the 27C512 EPROM in read mode and shares identical TSOP-32 pinout and DC/AC timing behavior. It supports the same CE/OE/WE control protocol and requires no hardware changes - though firmware must implement sector programming instead of byte programming for writes.
AT29C512-90TU-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- 32-TFSOP (0.724", 18.40mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH
- Memory Size:
- 512Kbit
- Memory Organization:
- 64K x 8
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 10ms
- Access Time:
- 90 ns
- Voltage - Supply:
- 4.5V ~ 5.5V
- Operating Temperature:
- -40°C ~ 85°C (TC)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 32-TSOP
AT29C512-90TU-T FAQ
1.How can I place an order for AT29C512-90TU-T through Aetrix?
Please submit a Request for Quotation (RFQ) for AT29C512-90TU-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for AT29C512-90TU-T reliable?
The price and inventory of AT29C512-90TU-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for AT29C512-90TU-T is usually 5 days.
3.What payment methods are accepted for AT29C512-90TU-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for AT29C512-90TU-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for AT29C512-90TU-T?
AT29C512-90TU-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your AT29C512-90TU-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for AT29C512-90TU-T?
For technical support, including AT29C512-90TU-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your AT29C512-90TU-T requirements.
6.How does Aetrix verify that AT29C512-90TU-T is sourced from the original manufacturer or authorized distributors?
All AT29C512-90TU-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that AT29C512-90TU-T meets industry standards.
7.What is the process for return or replacement of AT29C512-90TU-T?
All AT29C512-90TU-T units undergo pre-shipment inspection (PSI). If there is an issue with AT29C512-90TU-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The AT29C512-90TU-T part is unused and in its original packaging.
Return procedure for AT29C512-90TU-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
AT29C512-90TU-T Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
