My Inquiry
My Account
Infineon Technologies BC 807-16 E6327
- Part No.:
- BC 807-16 E6327
- Manufacturer:
- Infineon Technologies
- Category:
- Single Bipolar Transistors
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
BC 807-16 E6327.pdf
- Description:
- TRANS PNP 45V 0.5A PG-SOT23
- Quantity:
- Payment:
- Shipping:
Inventory:8,200
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BC807-16 E6327 from Infineon Technologies is a PNP silicon general-purpose audio-frequency bipolar junction transistor with VCEO = 45 V, IC = 500 mA, hFE = 100–160 (at IC = 100 mA), VCE(sat) ≤ 0.7 V (at IC = 500 mA), and SOT-23 package. It serves as a medium-power switching or linear amplification device in low-voltage DC control circuits, motor drivers, and LED load interfaces.
For engineers reviewing the BC807-16 E6327 datasheet, BC807-16 E6327 pinout, BC807-16 E6327 application, or BC807-16 E6327 equivalent, key selection criteria include guaranteed hFE group 16 performance across temperature, low saturation voltage for efficient switching, RoHS-compliant SOT-23 footprint compatibility, and AEC-Q101 qualification for automotive-grade reliability.
Technical Context
This PNP BJT operates in active, saturation, and cutoff regions with defined DC current gain grouping (hFE = 100–160 at IC = 100 mA, VCE = 1 V) and thermal derating per junction-to-solder-point resistance (RthJS ≤ 215 K/W). Its fT = 200 MHz supports stable operation up to mid-frequency signal conditioning.
Designed for complementary pairing with NPN BC817 series, it enables push-pull output stages and level-shifting circuits. The device meets AEC-Q101 stress testing requirements and features Pb-free termination per RoHS Directive 2011/65/EU.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 45 V - Maximum collector-emitter voltage before breakdown under open-base condition; sets safe operating voltage ceiling in 24 V and 36 V DC systems. |
| IC | 500 mA - Continuous collector current rating; supports driving relays, small solenoids, or LED arrays without external heat sinking. |
| hFE (100 mA) | 100–160 - Guaranteed DC current gain group "16"; ensures predictable base drive requirements in linear amplifier or switch-mode bias networks. |
| VCE(sat) | ≤ 0.7 V @ IC = 500 mA, IB = 50 mA - Low saturation voltage minimizes power loss and self-heating during on-state switching. |
| fT | 200 MHz - Transition frequency confirms usable bandwidth for audio preamplifier stages and PWM signal buffering up to ~20 MHz. |
| RthJS | ≤ 215 K/W - Junction-to-solder-point thermal resistance defines PCB copper area requirement for thermal management at full load. |
Pinout & Package
SOT-23 plastic surface-mount package with gull-wing leads; 3-terminal configuration optimized for automated placement and reflow soldering.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Emitter) | E | Current sink node; connects to higher potential rail in PNP switching configurations; requires low-impedance return path for stable bias. |
| 2 (Base) | B | Control input; accepts current-limited drive (max IB = 100 mA) to saturate or cut off the transistor reliably. |
| 3 (Collector) | C | Output node; delivers switched load current to ground; must be routed with adequate trace width for 500 mA continuous conduction. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive electronics per stress test requirements including HTSL, TC, and AC/DC life testing. |
| RoHS-compliant packaging | Pb-free termination and halogen-free molding compound meet EU Directive 2011/65/EU and JEDEC J-STD-020 moisture sensitivity level 1. |
| Low VCE(sat) | ≤ 0.7 V at rated IC/IB reduces conduction loss by >30% vs. legacy PNP transistors like BC327 in 12 V relay driver designs. |
| Complementary NPN pairing | Direct functional match with BC817-16 for balanced push-pull outputs, eliminating need for gain-matching external components. |
Applications
| Automotive Door Module | Industrial PLC Output Stage |
|---|---|
Use Scenario: Driving window lift motors and mirror adjustment actuators in 12 V vehicle platforms. IC Role / Device Role / Timing Role: PNP switch controlling ground-side motor winding current; handles bidirectional PWM at ≤1 kHz. Use Value: VCEO = 45 V provides 2× margin over 12 V battery transients; AEC-Q101 qualification ensures field reliability over 15-year service life. | Use Scenario: Isolating microcontroller GPIO pins from 24 V industrial solenoid loads. IC Role / Device Role / Timing Role: Medium-current interface transistor enabling logic-level control of 500 mA inductive loads. Use Value: hFE group 16 guarantees consistent base resistor sizing across production lots; SOT-23 footprint simplifies layout in space-constrained DIN-rail modules. |
| LED Backlight Driver | Consumer Appliance Power Sequencing |
Use Scenario: Constant-current switching for white LED strings in display backlight units. IC Role / Device Role / Timing Role: Linear current regulator in emitter-follower configuration with feedback resistor network. Use Value: Tight hFE binning (100–160) ensures uniform LED brightness across panels; low VCE(sat) maintains efficiency above 92% at 350 mA. | Use Scenario: Enabling/disabling auxiliary power rails (e.g., 5 V standby → 3.3 V core) during boot-up sequence. IC Role / Device Role / Timing Role: Low-speed power switch controlled by system supervisor IC with open-drain output. Use Value: RthJS ≤ 215 K/W allows operation at full IC without heatsink in ambient ≤ 70 °C; RoHS compliance satisfies global appliance safety certifications. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar PNP general-purpose transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BC807-16LT1G | Same hFE group and VCEO, but packaged in SOT-23 with different marking and tape/reel orientation; RthJS = 200 K/W. | Identical functional use; minor assembly line feed compatibility difference due to reel pitch and orientation. | Select when sourcing from ON Semiconductor distribution channels or requiring alternate tape-and-reel logistics. |
| MMBT807 | Same electrical specs and SOT-23 package, but not AEC-Q101 qualified; hFE min = 100 (no group binning). | Acceptable for commercial-grade consumer products where automotive reliability is not required. | Choose for cost-sensitive non-automotive designs where qualification overhead is unnecessary. |
Compared with BC807-16 E6327, BC807-16LT1G offers identical performance with alternate packaging logistics, while MMBT807 trades AEC-Q101 validation and hFE binning for lower unit cost in non-automotive applications.
Availability
BC807-16 E6327 is available at Aetrix Electronics and suitable for automotive door modules, industrial PLC output stages, and LED backlight drivers requiring stable component supply, long-term lifecycle support, and RoHS-compliant manufacturing.
Supply support for BC807-16 E6327 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and industrial control ICs, with global wafer fabrication and packaging operations.
The BC807 series belongs to Infineon's discrete bipolar transistor product line, engineered for high-reliability general-purpose switching and amplification in automotive, industrial, and consumer power interface applications.
FAQ
Is BC807-16 E6327 pin-compatible with BC807-25 or BC807-40?
Yes - all BC807 variants share identical SOT-23 pinout (E-B-C) and mechanical footprint. However, hFE group differs: BC807-16 has hFE = 100–160, BC807-25 = 160–250, and BC807-40 = 250–400. Base resistor values must be adjusted accordingly to maintain saturation.
What is the maximum allowable base current for continuous operation?
The absolute maximum DC base current is 100 mA per datasheet Section 2. Exceeding this risks metallization failure. For reliable 500 mA collector switching, design IB ≥ 50 mA (hFE min = 100), with 20% margin - i.e., 60 mA typical drive using a 180 Ω resistor from 3.3 V MCU GPIO.
Does BC807-16 E6327 support pulsed operation beyond 500 mA?
Yes - peak collector current ICM is 1000 mA for pulse widths < 300 µs and duty cycle < 2%. Derating curves in Figure 7 confirm 1.5× overcurrent capability for short-duration motor stall or inrush events when board layout provides adequate thermal mass.
Can BC807-16 E6327 replace BC327 in existing designs?
Yes - both are PNP transistors in TO-92 and SOT-23 packages with comparable VCEO (45 V) and IC (500 mA). However, BC807-16 has higher hFE (100–160 vs. 100–250 for BC327-16) and lower VCE(sat) (0.7 V vs. 0.9 V), improving efficiency but potentially requiring base resistor reduction by ~15%.
BC 807-16 E6327 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Transistor Type:
- PNP
- Current - Collector (Ic) (Max):
- 500 mA
- Voltage - Collector Emitter Breakdown (Max):
- 45 V
- Vce Saturation (Max) @ Ib, Ic:
- 700mV @ 50mA, 500mA
- Current - Collector Cutoff (Max):
- 100nA (ICBO)
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 100 @ 100mA, 1V
- Power - Max:
- 330 mW
- Frequency - Transition:
- 200MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-SOT23
BC 807-16 E6327 FAQ
1.How can I place an order for BC 807-16 E6327 through Aetrix?
Please submit a Request for Quotation (RFQ) for BC 807-16 E6327 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BC 807-16 E6327 reliable?
The price and inventory of BC 807-16 E6327 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BC 807-16 E6327 is usually 5 days.
3.What payment methods are accepted for BC 807-16 E6327?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BC 807-16 E6327 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BC 807-16 E6327?
BC 807-16 E6327 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BC 807-16 E6327 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BC 807-16 E6327?
For technical support, including BC 807-16 E6327 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BC 807-16 E6327 requirements.
6.How does Aetrix verify that BC 807-16 E6327 is sourced from the original manufacturer or authorized distributors?
All BC 807-16 E6327 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BC 807-16 E6327 meets industry standards.
7.What is the process for return or replacement of BC 807-16 E6327?
All BC 807-16 E6327 units undergo pre-shipment inspection (PSI). If there is an issue with BC 807-16 E6327, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BC 807-16 E6327 part is unused and in its original packaging.
Return procedure for BC 807-16 E6327:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BC 807-16 E6327 Tags
-
MMBT3906LT1G
onsemi
-
MMBT3904-7-F
Diodes Incorporated
-
MMBT3904LT1G
onsemi
-
MMBT3906-7-F
Diodes Incorporated
-
MMBT3904-TP
Micro Commercial Co
-
MMBT2222A-7-F
Diodes Incorporated
-
BC846BLT1G
onsemi
-
BC847B,215
Nexperia USA Inc.
-
SMMBT3904LT1G
onsemi
-
MMBT2222A-TP
Micro Commercial Co
-
MMBTA06LT1G
onsemi
-
MMBT2222ALT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
