My Inquiry
My Account
Nexperia USA Inc. BC807-40HZ
- Part No.:
- BC807-40HZ
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single Bipolar Transistors
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
BC807-40HZ.pdf
- Description:
- TRANS PNP 45V 0.5A TO-236AB
- Quantity:
- Payment:
- Shipping:
Inventory:160
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BC807-40HZ from Nexperia is a PNP general-purpose bipolar junction transistor in SOT23 package, rated for −45 V VCEO, −500 mA continuous collector current, and DC current gain (hFE) of 250–600 at VCE = −1 V and IC = −100 mA. It operates reliably up to 175 °C junction temperature and is used in low-voltage switching and linear amplification circuits in industrial control modules.
For engineers reviewing the BC807-40HZ datasheet, BC807-40HZ pinout, BC807-40HZ application, or BC807-40HZ equivalent, this page delivers verified electrical parameters, thermal derating behavior, SOT23 terminal mapping, and validated alternatives for discrete PNP switching design.
Technical Context
This transistor implements standard PNP BJT architecture with base-emitter and collector-base junctions optimized for stable DC gain across wide temperature range (−55 °C to +175 °C). Its hFE binning (40H) ensures minimum 250 gain at IC = −100 mA, supporting predictable biasing in emitter-follower and common-emitter configurations.
Thermal performance is defined by four mounting-dependent Rth(j-a) values (280–470 K/W), reflecting power dissipation limits under varying PCB copper layer count and collector pad area - critical for sustained operation near 500 mA in compact industrial enclosures.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | −45 V: Maximum safe collector-emitter voltage with open base; defines off-state blocking capability in low-side switch applications. |
| IC | −500 mA: Continuous DC collector current at 25 °C ambient; sets maximum load drive capacity in relay drivers or LED sinks. |
| hFE | 250–600 @ VCE = −1 V, IC = −100 mA: Confirmed DC current gain range enabling precise base resistor calculation for saturation control. |
| VCE(sat) | ≤ −700 mV @ IC = −500 mA, IB = −50 mA: Verified saturation voltage ensuring ≤0.7 V drop during full-load conduction, minimizing power loss. |
| Tj(max) | +175 °C: Maximum junction temperature; supports operation in high-ambient environments like motor control housings or power supply heatsinks. |
| Ptot | 540 mW @ 4-layer FR4 PCB with 1 cm² collector pad: Real-world power handling limit under optimal thermal layout conditions. |
| fT | 80 MHz @ VCE = −5 V, IC = −10 mA: Transition frequency confirming suitability for audio-frequency amplification and <10 MHz switching. |
Pinout & Package
SOT23 (TO-236AB) plastic surface-mount package with 3 leads; standardized footprint per Nexperia's reflow and wave soldering guidelines (Fig. 44–45).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Base (B) | Current-controlled input node; requires series resistor to limit IB and ensure saturation at target IC. |
| 2 | Emitter (E) | Common reference terminal for PNP configuration; connected to higher potential rail in low-side switch topologies. |
| 3 | Collector (C) | Output current path; routed to load (e.g., relay coil or LED anode) with thermal pad connection recommended for >300 mA operation. |
Key Features
| Feature | Design Value |
|---|---|
| Three hFE bins (16/25/40) | Enables precise gain selection: BC807-40HZ guarantees ≥250 hFE, reducing base drive uncertainty in production designs. |
| High-temperature operation | Rated for continuous operation up to +175 °C junction temperature, supporting use in sealed industrial enclosures without forced cooling. |
| Low VCE(sat) | ≤700 mV at full 500 mA load ensures <350 mW conduction loss, critical for thermally constrained PCB layouts. |
| Standard SOT23 footprint | Compatible with automated pick-and-place and reflow processes; matches JEDEC TO-236AB mechanical dimensions (3.0 × 1.4 × 1.1 mm). |
Applications
| Industrial Relay Driver | LED Current Sink |
|---|---|
Use Scenario: Driving 24 V DC industrial relays with coil resistance ~200 Ω in PLC output modules. IC Role / Device Role / Timing Role: PNP switch sinking relay coil current from 24 V rail to ground-controlled logic signal. Use Value: Guaranteed hFE ≥250 ensures reliable saturation with ≤2.2 kΩ base resistor, eliminating need for Darlington stages. | Use Scenario: Constant-current sink for indicator LEDs in HMI panels operating from 5 V or 12 V supplies. IC Role / Device Role / Timing Role: Linear current regulator using emitter resistor feedback, leveraging stable hFE over temperature. Use Value: Low VBE (~1.2 V) and tight hFE tolerance enable ±5% LED current accuracy without trimming. |
| Temperature Sensor Interface | Low-Voltage Level Shifter |
Use Scenario: Amplifying output of NTC thermistors in HVAC sensor nodes where ambient reaches 85 °C. IC Role / Device Role / Timing Role: Common-emitter amplifier stage converting thermistor resistance change into voltage swing. Use Value: Stable hFE across −40 °C to +125 °C ensures consistent gain calibration without software compensation. | Use Scenario: Bidirectional level translation between 3.3 V microcontroller GPIO and 5 V legacy peripherals. IC Role / Device Role / Timing Role: Active pull-up element in open-collector interface, enabling voltage domain bridging. Use Value: Fast fT (80 MHz) and low Cc (7 pF) support clean edge transitions up to 10 MHz data rates. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar PNP general-purpose transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BC807-40W | Same hFE bin (250–600) but marked for wafer-level testing; identical electrical specs and SOT23 package. | No functional difference; W suffix denotes alternate test flow, not performance variation. | Select when sourcing from distributors emphasizing wafer-tested lots for traceability-critical programs. |
| MMBT3906LT1G | Lower VCEO (−40 V), lower hFE (100–300), and higher VCE(sat) (≤−800 mV @ −50 mA); same SOT23 footprint. | Not suitable for 45 V systems or high-gain biasing; acceptable only in ≤30 V, low-current (<100 mA) applications. | Choose only if cost sensitivity outweighs voltage margin and gain stability requirements. |
Compared with BC807-40HZ, BC807-40W offers identical performance with enhanced test documentation, while MMBT3906LT1G trades voltage headroom and gain consistency for broader distributor availability at lower cost in non-critical designs.
Availability
BC807-40HZ is available at Aetrix Electronics and suitable for industrial relay drivers, LED current sinks, temperature sensor interfaces, and low-voltage level shifters requiring stable component supply across extended temperature ranges.
Supply support for BC807-40HZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on essential efficiency-enhancing components, delivering high-volume, high-reliability discrete and logic devices for automotive, industrial, and consumer markets.
The BC807H series belongs to Nexperia's general-purpose transistor product line, engineered for robust DC switching and amplification in space-constrained, thermally demanding applications where consistent gain and high-temperature reliability are mandatory.
FAQ
What is the maximum allowable collector current for BC807-40HZ at 100 °C ambient temperature?
At Tamb = 100 °C, the maximum continuous collector current is derated to approximately −320 mA based on the 540 mW Ptot rating and thermal resistance of 280 K/W (4-layer PCB). This assumes proper heat spreading via the collector pad and no additional airflow.
Does BC807-40HZ support pulsed operation beyond its DC ratings?
Yes - peak collector current reaches −1 A for single pulses ≤1 ms (Tamb = 25 °C), as confirmed in Table 6. Safe operation requires adherence to the SOA curve (Fig. 2), especially limiting VCE during high-current pulses to avoid second breakdown.
How does the marking code "6U%" correspond to BC807-40HZ?
The marking "6U%" on the device body identifies the BC807-40HZ variant, where "6U" is the factory-specific code for the 40H gain bin, and "%" is a placeholder for the manufacturing site identifier per Table 5 - no functional impact on electrical behavior.
Can BC807-40HZ replace BC807-25H in an existing design without modification?
Yes - both share identical pinout, voltage/current ratings, and package. The higher hFE (250–600 vs. 160–400) may reduce required base drive, potentially improving noise immunity but requiring verification of base resistor value to avoid excessive IB in saturation.
BC807-40HZ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Transistor Type:
- PNP
- Current - Collector (Ic) (Max):
- 500 mA
- Voltage - Collector Emitter Breakdown (Max):
- 45 V
- Vce Saturation (Max) @ Ib, Ic:
- 700mV @ 50mA, 500mA
- Current - Collector Cutoff (Max):
- 100nA (ICBO)
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 250 @ 100mA, 1V
- Power - Max:
- 320 mW
- Frequency - Transition:
- 80MHz
- Operating Temperature:
- 175°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TO-236AB
BC807-40HZ FAQ
1.How can I place an order for BC807-40HZ through Aetrix?
Please submit a Request for Quotation (RFQ) for BC807-40HZ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BC807-40HZ reliable?
The price and inventory of BC807-40HZ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BC807-40HZ is usually 5 days.
3.What payment methods are accepted for BC807-40HZ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BC807-40HZ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BC807-40HZ?
BC807-40HZ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BC807-40HZ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BC807-40HZ?
For technical support, including BC807-40HZ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BC807-40HZ requirements.
6.How does Aetrix verify that BC807-40HZ is sourced from the original manufacturer or authorized distributors?
All BC807-40HZ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BC807-40HZ meets industry standards.
7.What is the process for return or replacement of BC807-40HZ?
All BC807-40HZ units undergo pre-shipment inspection (PSI). If there is an issue with BC807-40HZ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BC807-40HZ part is unused and in its original packaging.
Return procedure for BC807-40HZ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BC807-40HZ Tags
-
MMBT3906LT1G
onsemi
-
MMBT3904-7-F
Diodes Incorporated
-
MMBT3904LT1G
onsemi
-
MMBT3906-7-F
Diodes Incorporated
-
MMBT3904-TP
Micro Commercial Co
-
MMBT2222A-7-F
Diodes Incorporated
-
BC846BLT1G
onsemi
-
BC847B,215
Nexperia USA Inc.
-
SMMBT3904LT1G
onsemi
-
MMBT2222A-TP
Micro Commercial Co
-
MMBTA06LT1G
onsemi
-
MMBT2222ALT1G
onsemi
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
