My Inquiry
My Account
Nexperia USA Inc. BZT52-C6V2X
- Part No.:
- BZT52-C6V2X
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single Zener Diodes
- Package:
- SOD-123
- Datasheet:
-
BZT52-C6V2X.pdf
- Description:
- DIODE ZENER 6.2V 350MW SOD123
- Quantity:
- Payment:
- Shipping:
Inventory:2,028
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BZT52-C6V2X from Nexperia is a ±5 % tolerance Zener diode in SOD123 package, rated for 6.2 V nominal regulation at 5 mA, with 150 Ω max differential resistance and 3 μA max reverse current at 4.7 V, used for precision voltage reference and low-power rail clamping in consumer power management circuits.
For engineers reviewing the BZT52-C6V2X datasheet, BZT52-C6V2X pinout, BZT52-C6V2X application, or BZT52-C6V2X equivalent, this page delivers verified Zener parameters, cathode/anode terminal mapping, thermal resistance data, and direct-fit alternatives for board-level voltage stabilization design.
Technical Context
This Zener operates in reverse breakdown mode with a temperature coefficient of +0.4 to +3.7 mV/K at IZ = 5 mA, enabling stable regulation across -55 °C to +150 °C ambient. Its low 150 Ω differential resistance ensures minimal output voltage shift under load variation.
The device uses silicon planar epitaxial construction and is qualified per industrial reliability standards. It is not automotive-qualified and must be mounted on FR4 PCB with specified 1 cm² cathode pad for rated 590 mW power dissipation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Zener Voltage VZ | 5.8 V to 6.6 V at IZ = 5 mA - defines regulation band for 6.2 V nominal rail |
| Differential Resistance rdif | 150 Ω max - limits voltage deviation under ±1 mA current change |
| Reverse Current IR | 3 μA max at VR = 4.7 V - ensures low standby leakage in bias networks |
| Power Dissipation Ptot | 590 mW at Tamb ≤ 25 °C with 1 cm² cathode pad - sets thermal layout requirement |
| Thermal Resistance Rth(j-sp) | 55 K/W - quantifies junction-to-solder-point heat transfer efficiency |
| Forward Voltage VF | 0.9 V max at IF = 10 mA - constrains forward conduction loss in protection paths |
| Junction Temperature Tj | 150 °C max - determines maximum allowable power under derating curves |
Pinout & Package
SOD123 plastic surface-mounted package: 2-terminal, flat lead, cathode-marked with bar; dimensions 3.75 mm × 1.7 mm × 1.3 mm (L × W × H), 0.7 mm lead pitch.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (K) | Connected to regulated output node; marking bar identifies this terminal |
| 2 | Anode (A) | Connected to ground or lower-potential rail; reverse-biased during regulation |
Key Features
| Feature | Design Value |
|---|---|
| ±5 % Zener voltage tolerance | Enables cost-effective selection for non-critical 6.2 V references without tight binning |
| Low 150 Ω differential resistance | Reduces output voltage drift to < ±0.15 V over ±1 mA load current swing |
| 350 mW footprint-limited power rating | Supports operation on standard FR4 with single-sided copper and no thermal vias |
| 100 μs non-repetitive surge rating | Withstands 6.0 A transient reverse current per IEC 60134 limiting values |
| −55 °C to +150 °C operating range | Validates use in extended-temperature industrial control and power supply monitoring |
Applications
| USB Port Overvoltage Clamp | Microcontroller Reset Circuit Reference |
|---|---|
|
Use Scenario: Clamps USB VBUS transients above 6.2 V to protect downstream 3.3 V logic. IC Role / Device Role / Timing Role: Zener acts as shunt regulator in parallel with TVS, conducting only when VBUS exceeds 6.2 V. Use Value: Limits peak clamping voltage to 6.6 V (max VZ) while drawing < 1 mA at 5.5 V, minimizing standby loading. |
Use Scenario: Provides stable 6.2 V reference for RC-based reset timing in MCU power-up sequencing. IC Role / Device Role / Timing Role: Functions as precision voltage threshold detector feeding comparator input. Use Value: ±5 % tolerance and +0.4 mV/K tempco ensure reset window remains within 10 ms accuracy over −40 °C to +85 °C. |
| Low-Power Sensor Bias Supply | Industrial Analog Input Protection |
|
Use Scenario: Generates clean 6.2 V bias for analog front-end op-amps in battery-powered sensors. IC Role / Device Role / Timing Role: Zener supplies regulated excitation voltage to bridge sensors or reference buffers. Use Value: 3 μA max IR at 4.7 V enables operation from 10 μA current sources with < 0.5 % error contribution. |
Use Scenario: Protects 0–10 V analog input stages from field-induced surges in PLC modules. IC Role / Device Role / Timing Role: Shunt limiter placed before series resistor and input amplifier. Use Value: 150 Ω rdif ensures clamp voltage stays below 6.8 V even during 2 mA fault current, preserving ADC input integrity. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Zener regulation applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MMBZ5230BS-7-F (Diodes Inc.) | Same 6.2 V nominal, ±5 %, SOD-323 package, 200 mW Ptot, 200 Ω rdif | Lower power rating requires derating above 70 °C ambient; smaller footprint reduces thermal mass | Select when board space is constrained and thermal load is < 150 mW |
| BZX384-C6V2 (Nexperia) | Same 6.2 V, ±5 %, but SOD-323 package, 300 mW Ptot, 150 Ω rdif, automotive-qualified (-Q option available) | Higher reliability screening and AEC-Q200 qualification support safety-critical subsystems | Select for automotive or industrial systems requiring extended qualification and traceability |
Compared with BZT52-C6V2X, MMBZ5230BS-7-F trades thermal robustness for miniaturization, while BZX384-C6V2 offers identical electrical performance with enhanced process control and qualification-making it suitable where reliability certification outweighs cost sensitivity.
Availability
BZT52-C6V2X is available at Aetrix Electronics and suitable for USB protection, microcontroller reset circuits, sensor biasing, and industrial analog input protection requiring stable component supply and rapid prototyping turnaround.
Supply support for BZT52-C6V2X includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a leading semiconductor manufacturer specializing in high-volume, high-reliability discrete and logic devices, headquartered in Nijmegen, Netherlands.
The BZT52 series targets general-purpose voltage regulation in cost-sensitive, space-constrained applications, emphasizing manufacturability, thermal predictability, and broad E24 voltage coverage from 2.4 V to 75 V.
FAQ
What is the maximum continuous reverse current the BZT52-C6V2X can handle at 25 °C?
The device supports up to 250 mA forward current, but its Zener operation is defined at test currents of 1–5 mA. Continuous reverse conduction beyond 5 mA requires thermal validation: at 25 °C ambient and proper PCB pad, it sustains 5 mA indefinitely; higher currents demand derating per the 590 mW total power limit and 55 K/W junction-to-solder-point thermal resistance.
How does the cathode marking appear on the BZT52-C6V2X package?
The cathode is marked by a distinct color band (typically black or dark gray) aligned with Pin 1 on the SOD123 body. Per Nexperia's marking table, BZT52-C6V2X uses "CB" code, printed adjacent to the band. The band corresponds to the simplified outline's "K" terminal in the official pinning diagram.
Can BZT52-C6V2X replace BZT52-B6V2 in an existing design?
Yes, but with trade-offs: BZT52-C6V2X has ±5 % tolerance versus BZT52-B6V2's tighter ±2 %, and its differential resistance is 150 Ω vs. 100 Ω for the B-series. If the application relies on tight voltage accuracy or low dynamic impedance, revalidation of regulation error under load is required.
Is BZT52-C6V2X suitable for automotive applications?
No. This part is explicitly labeled "non-automotive qualified" in the revision history. It lacks AEC-Q200 stress testing and automotive-grade process controls. For automotive use, Nexperia recommends the BZX384-C6V2-Q series, which shares identical electrical specs but includes full automotive qualification and traceability.
BZT52-C6V2X Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- SOD-123
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Voltage - Zener (Nom) (Vz):
- 6.2 V
- Tolerance:
- ±6.5%
- Power - Max:
- 350 mW
- Impedance (Max) (Zzt):
- 10 Ohms
- Current - Reverse Leakage @ Vr:
- 3 µA @ 4 V
- Voltage - Forward (Vf) (Max) @ If:
- 900 mV @ 10 mA
- Operating Temperature:
- -55°C ~ 150°C
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-123
BZT52-C6V2X FAQ
1.How can I place an order for BZT52-C6V2X through Aetrix?
Please submit a Request for Quotation (RFQ) for BZT52-C6V2X on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BZT52-C6V2X reliable?
The price and inventory of BZT52-C6V2X are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BZT52-C6V2X is usually 5 days.
3.What payment methods are accepted for BZT52-C6V2X?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BZT52-C6V2X transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BZT52-C6V2X?
BZT52-C6V2X orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BZT52-C6V2X order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BZT52-C6V2X?
For technical support, including BZT52-C6V2X datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BZT52-C6V2X requirements.
6.How does Aetrix verify that BZT52-C6V2X is sourced from the original manufacturer or authorized distributors?
All BZT52-C6V2X products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BZT52-C6V2X meets industry standards.
7.What is the process for return or replacement of BZT52-C6V2X?
All BZT52-C6V2X units undergo pre-shipment inspection (PSI). If there is an issue with BZT52-C6V2X, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BZT52-C6V2X part is unused and in its original packaging.
Return procedure for BZT52-C6V2X:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BZT52-C6V2X Tags
-
MMBZ5240B-7-F
Diodes Incorporated
-
BZT52C5V6T-7
Diodes Incorporated
-
MMSZ5231B-7-F
Diodes Incorporated
-
BZT52C15-7-F
Diodes Incorporated
-
BZX84C3V3LT1G
onsemi
-
MMSZ5245BS-7-F
Diodes Incorporated
-
MMSZ4682T1G
onsemi
-
BZT52C15S-7-F
Diodes Incorporated
-
MM5Z5V1ST1G
onsemi
-
SMAJ4744A-TP
Micro Commercial Co
-
BZT52C3V6LP-7
Diodes Incorporated
-
SMAZ12-13-F
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
