Nexperia USA Inc. BZV55-C11,115

Overview

BZV55-C11,115 from Nexperia USA Inc. is a Zener voltage regulator diode rated around 11 V, SOD-80 / small glass Zener package. Its main job is to hold a protected node near a defined breakdown voltage, so voltage tolerance, leakage, impedance, and package dissipation matter more than headline current alone.

BZV55-C11,115 is most relevant to voltage reference rails, overvoltage clamps, bias networks, analog input protection, where the surrounding circuit depends on the same rating profile, footprint, thermal behavior, and sourcing continuity.

Technical Context

BZV55-C11,115 is used as a controlled breakdown device rather than a simple rectifier. Its practical behavior depends on Zener voltage, tolerance, dynamic impedance, leakage, and the external series impedance that limits current.

In clamp or shunt-regulator positions, BZV55-C11,115 should be evaluated at the real operating current because low-current knee behavior and high-current dissipation can change the effective rail voltage.

Key Specifications

Pinout & Package

BZV55-C11,115 uses SOD-80 / small glass Zener package. Pin mapping, polarity, or item format should be matched to the exact board, fixture, or procurement requirement before replacement.

Key Features

• BZV55-C11,115 is identified as a Zener voltage regulator diode.
• 11 V voltage or operating class for the relevant circuit stress.
• low-power regulator current set by package dissipation current or output class, subject to package and thermal derating.
• SOD-80 / small glass Zener package package or item format for procurement and assembly review.
• 11 V nominal Zener voltage
• voltage regulation and clamping
• compact package
• Shunt regulation and overvoltage clamp behavior.
• Nominal Zener voltage should be matched to the protected rail.

Applications

Equivalent & Alternatives

When evaluating BZV55-C11,115 equivalent devices, compare voltage rating or operating class, current or output capability, package and footprint, pin mapping or polarity, thermal behavior, qualification suffix, lifecycle and sourcing status. A similar family name is not enough when the board depends on timing, leakage, firmware, optical output, or protection behavior.

Quality

BZV55-C11,115 should be sourced as original Nexperia USA Inc. material through traceable and controlled supply channels. Quality verification may include package inspection, polarity review, Zener-voltage screening, leakage testing, solderability checks, and reel label verification, along with incoming inspection suited to Zener voltage regulator diode production, repair, or lifecycle procurement.

Availability

BZV55-C11,115 is available at Aetrix Electronics and suitable for voltage reference rails, overvoltage clamps, bias networks, analog input protection requiring 11 V, SOD-80 / small glass Zener package in a controlled BOM or repair program.

Supply support may include scheduled delivery planning, volume procurement support, BOM continuity assistance, traceable sourcing management, and lifecycle availability coordination for manufacturers, repair teams, contract manufacturers, and engineering buyers managing Zener voltage regulator diode demand.

For production deployment, confirming package fit, pin mapping or polarity, electrical rating, temperature margin, lifecycle status, approved manufacturer identity, and sourcing continuity helps reduce qualification risk for BZV55-C11,115.

Manufacturer

Nexperia USA Inc. supplies logic ICs, ESD protection, bipolar transistors, MOSFETs, diodes, rectifiers, and small-signal discrete semiconductors for automotive, industrial, mobile, and consumer electronics. BZV55-C11,115 belongs to the Nexperia product area indicated by its family prefix.

FAQ

What is BZV55-C11,115 used for?

BZV55-C11,115 is used for voltage reference rails, overvoltage clamps, bias networks. In those circuits, BZV55-C11,115 provides the Zener voltage regulator diode function with 11 V, SOD-80 / small glass Zener package. The final selection should match the schematic role, operating stress, package footprint, and sourcing requirements.

What Zener voltage should be checked for BZV55-C11,115?

BZV55-C11,115 should be checked against its nominal Zener voltage, tolerance band, test current, leakage, dynamic impedance, and package power rating. In real clamp or shunt circuits, BZV55-C11,115 also depends on the external series impedance that limits current during overvoltage events.

Can BZV55-C11,115 be used as a voltage reference?

BZV55-C11,115 can support simple reference or bias rails when its voltage tolerance, operating current, noise, and temperature behavior fit the circuit. Precision references may need tighter devices, so BZV55-C11,115 should be evaluated against the regulation accuracy actually required.

Can BZV55-C11,115 be replaced by a similar part?

BZV55-C11,115 can be compared with similar family members only after electrical limits, package, orientation, qualification suffix, timing or leakage behavior, and approved-source rules are reviewed. A similar name alone is not enough because BZV55-C11,115 may carry package, program, bin, or lifecycle details.

Why source BZV55-C11,115 through Aetrix Electronics?

Sourcing BZV55-C11,115 through Aetrix Electronics supports traceable procurement, scheduled delivery planning, BOM continuity assistance, and lifecycle availability coordination. This is useful when BZV55-C11,115 is needed for production builds, repair lots, controlled alternates, or long-running equipment support.