Analog Devices Inc./Maxim Integrated CABLE-PH10

Overview

CABLE-PH10 from TRINAMIC is a 200 mm pre-terminated cable with a 10-pin JST PHR-10 connector on one end and a clean-cut unterminated end on the other, constructed with AWG 24 UL/CSA 1007/1569-TR64 wire. It supports signal interconnection between TRINAMIC stepper motor drivers (e.g., TMC2130, TMC2209) and external control boards or sensors, delivering consistent pinout mapping and color-coded conductors for reliable assembly in motion control prototyping.

For engineers reviewing the CABLE-PH10 datasheet, CABLE-PH10 pinout, CABLE-PH10 application, or CABLE-PH10 equivalent, this cable serves as a standardized interface solution for TRINAMIC evaluation platforms requiring precise 10-conductor routing, mechanical compatibility with PHR-series headers, and traceable conductor identification via defined color sequence (Black–Red–Blue–Gray–Brown–White–White–Green–Black–Red).

Technical Context

CABLE-PH10 implements a fixed-length, single-ended interconnect designed exclusively for TRINAMIC ecosystem integration. Its PHR10 connector mates with corresponding PHR-series receptacles on TRINAMIC driver modules and breakout boards, while the clean-cut end enables custom termination to user-defined PCBs or terminal blocks.

The cable uses AWG 24 stranded copper conductors with UL/CSA 1007/1569-TR64 insulation, supporting signal-level current delivery and moderate flex life. Conductor color coding follows a documented 10-pin sequence-no shielding, no twisted pairs, no differential signaling-intended for low-speed digital I/O, enable/step/direction signals, and basic analog feedback routing.

Key Specifications

Availability

CABLE-PH10 is available at Aetrix Electronics and suitable for stepper motor driver evaluation, motion control system prototyping, and TRINAMIC-based embedded positioning applications requiring stable component supply and consistent mechanical interface behavior.

Supply support for CABLE-PH10 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

TRINAMIC Motion Control GmbH & Co. KG is a German semiconductor company specializing in high-precision motion control ICs, drivers, and system solutions for stepper and BLDC motors.

CABLE-PH10 belongs to TRINAMIC's accessory cable family, engineered to provide plug-and-play physical layer connectivity between TRINAMIC driver ICs/modules and host controllers or sensor peripherals in lab and small-batch development workflows.

FAQ

What is the exact connector type used on the terminated end of CABLE-PH10?

CABLE-PH10 features a JST PHR-10 connector on one end - a 10-position, 2.0 mm pitch, polarized surface-mount header compliant with JST's PHR series mechanical and mating specifications. This connector is designed to mate reliably with TRINAMIC evaluation boards and driver modules equipped with matching PHR-series receptacles.

Does CABLE-PH10 include shielding or twisted-pair construction?

No, CABLE-PH10 does not include shielding or twisted-pair conductors. It consists of 10 individually insulated AWG 24 wires with standard PVC-based UL/CSA 1007/1569-TR64 insulation. The cable is intended for low-speed digital and analog signal routing - such as STEP, DIR, ENN, UART, and reference voltage lines - where EMI immunity is managed at the board or system level, not by the cable itself.

What is the purpose of the "clean cut" end on CABLE-PH10?

The clean cut end of CABLE-PH10 provides bare, insulated, tinned wire ends - each identified by its assigned color per the documented 10-pin sequence - enabling direct soldering to custom PCBs, screw terminals, or crimp connectors. This design gives developers full flexibility to integrate CABLE-PH10 into non-standard or proprietary host interfaces without requiring additional adapter hardware.

Can CABLE-PH10 be used interchangeably with EHR-series cables like CABLE-EH10?

No, CABLE-PH10 is not interchangeable with EHR-series cables. It uses a JST PHR-10 connector (2.0 mm pitch), whereas EHR cables use JST EHR connectors (2.5 mm pitch) with different keying, contact geometry, and mating force. Attempting to mate CABLE-PH10 with an EHR receptacle will result in mechanical incompatibility and potential damage to both connector and board.

Is CABLE-PH10 rated for industrial temperature or continuous operation?

CABLE-PH10 uses UL/CSA 1007/1569-TR64 wire rated for 80 °C operating temperature and general-purpose indoor use. It is not rated for extended high-temperature environments, outdoor exposure, or continuous high-current operation. TRINAMIC specifies CABLE-PH10 for lab evaluation and prototype integration - not for sealed enclosures, high-vibration, or safety-critical deployments without additional validation.