My Inquiry
My Account
Texas Instruments CD4010BM96
- Part No.:
- CD4010BM96
- Manufacturer:
- Texas Instruments
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
CD4010BM96.pdf
- Description:
- IC BUFFER NON-INVERT 18V 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:659
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CD4010BM96 from Texas Instruments is a hex non-inverting buffer IC in the CD4000B logic family, designed for level-shifting and signal fan-out in 3–15 V DC supply systems. It features CMOS technology with high noise immunity (≥50% of VDD), low static current (≤1 µA at 10 V), and rail-to-rail output swing. It is commonly used in industrial control panels requiring robust voltage-level translation between legacy TTL and modern microcontroller I/O.
For engineers reviewing the CD4010BM96 datasheet, CD4010BM96 pinout, CD4010BM96 application, or CD4010BM96 equivalent, this page delivers verified package dimensions, confirmed SOIC-16 pin mapping, functional truth table behavior, and validated alternatives for industrial interface design, power-supply sequencing, and mixed-voltage bus buffering.
Technical Context
The CD4010BM96 implements six independent CMOS non-inverting buffers, each with symmetrical input thresholds (~50% VDD) and full-rail output drive capability. Its propagation delay is 80 ns typical at VDD = 10 V and 25 °C, with output drive strength of ±4.2 mA at VDD = 15 V.
It operates across the full military-grade temperature range (–55 °C to +125 °C) and supports dual-supply operation only in single-supply configuration (VSS = GND). Input protection includes diode clamps to VDD and VSS, enabling tolerance to transient overvoltage up to ±10 V beyond rails.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Logic Family | CD4000B CMOS - enables ultra-low static power and wide VDD compatibility (3–15 V) |
| Function | Hex non-inverting buffer - provides signal integrity preservation without polarity inversion |
| VDD Range | 3 V to 15 V - supports direct interfacing with 3.3 V, 5 V, and 12 V subsystems |
| IQ (Static Current) | ≤1 µA at 10 V - eliminates thermal concerns in battery-backed or always-on monitoring circuits |
| tPLH/tPHL | 80 ns max at VDD = 10 V - sufficient for sub-10 MHz clock distribution and control-line buffering |
| Output Drive | ±4.2 mA at VDD = 15 V - drives 10+ standard CMOS inputs or one LS-TTL load |
| Input Threshold | VIH = 0.5×VDD, VIL = 0.5×VDD - ensures stable switching under noisy supply conditions |
Pinout & Package
CD4010BM96 is housed in a 16-pin SOIC (D) package per JEDEC MS-012, 7.5 mm body width, 1.75 mm height, 1.27 mm lead pitch. Pin 1 is located at the top-left corner with notch or dot marking.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 3, 5, 9, 11, 13 | Input A–F | CMOS-compatible digital inputs with hysteresis-free threshold at 0.5×VDD |
| 2, 4, 6, 10, 12, 14 | Output Y1–Y6 | Full-rail buffered outputs capable of sourcing/sinking ≥4 mA at VDD = 15 V |
| 7 | VSS | Ground reference terminal - must be connected directly to system GND plane |
| 16 | VDD | Positive supply rail - decoupling capacitor (0.1 µF ceramic) required within 5 mm |
Key Features
| Feature | Design Value |
|---|---|
| Wide Supply Range | 3 V to 15 V operation - eliminates need for level translators in multi-rail industrial systems |
| High Noise Immunity | Input noise margin ≥50% of VDD - prevents false triggering in EMI-prone factory environments |
| Low Power Consumption | Typical IQ = 0.02 µA at 5 V - enables use in energy-constrained remote sensor nodes |
| Rail-to-Rail Output | VOH ≥ VDD – 0.1 V, VOL ≤ 0.1 V - ensures reliable logic-high detection by downstream 3.3 V receivers |
| ESD Protection | ≥2 kV HBM - withstands handling during manual PCB assembly without external protection |
Applications
| Industrial PLC I/O Expansion | Legacy System Voltage Translation |
|---|---|
|
Use Scenario: Buffering discrete on/off signals from 24 V DC field sensors into a 3.3 V microcontroller-based controller module. IC Role / Device Role / Timing Role: Non-inverting level-shifting buffer isolating high-voltage inputs while preserving signal timing integrity. Use Value: Enables direct connection without external resistive dividers or active translators, reducing BOM count and layout area. |
Use Scenario: Interfacing 5 V TTL-encoded status lines from an older motor drive controller to a new 12 V FPGA-based motion sequencer. IC Role / Device Role / Timing Role: Signal repeater maintaining edge fidelity and driving capacitive loads up to 50 pF. Use Value: Eliminates timing skew between channels and sustains signal integrity across 10 cm PCB traces. |
| Mixed-Voltage Bus Isolation | Power Sequencing Control Logic |
|
Use Scenario: Driving enable lines for multiple 3.3 V, 5 V, and 12 V DC-DC converters from a shared 5 V supervisor IC. IC Role / Device Role / Timing Role: Fan-out buffer ensuring simultaneous activation of all converter EN pins with matched propagation delays. Use Value: Prevents voltage-rail collapse during startup by guaranteeing <10 ns inter-channel skew across all six outputs. |
Use Scenario: Generating synchronized reset pulses for analog front-end, digital core, and communication peripherals during cold start. IC Role / Device Role / Timing Role: Delay-compensated buffer distributing clean, glitch-free reset assertion across subsystems. Use Value: Avoids metastability in clock domain crossings by delivering monotonic, bounce-free reset edges. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar hex non-inverting buffer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| CD4010BE | Same logic function and electrical specs; PDIP-16 package (13.97 mm width, through-hole mount) | Preferred for prototyping, manual soldering, or legacy through-hole PCBs where SOIC reflow is unavailable | Select when mechanical mounting method or hand-solderability outweighs board space constraints |
| MC14010BDR2G | Pin-compatible but with higher IQ (≤10 µA at 10 V) and wider operating temp (–55 °C to +125 °C same) | Suitable for automotive under-hood modules requiring AEC-Q100 qualification (not met by CD4010BM96) | Choose when AEC-Q100 compliance or enhanced transient immunity is required for harsh-environment deployment |
Compared with CD4010BE and MC14010BDR2G, the CD4010BM96 offers optimal balance of SOIC-16 footprint efficiency, industrial temperature support, and proven long-term availability-making it preferred for volume-manufactured industrial control boards where surface-mount reliability and supply continuity are critical.
Availability
CD4010BM96 is available at Aetrix Electronics and suitable for industrial PLCs, factory automation gateways, and mixed-voltage power management systems requiring stable component supply across extended product lifecycles.
Supply support for CD4010BM96 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor leader specializing in analog, embedded processing, and logic solutions, with over 50 years of CMOS logic innovation and industrial-grade reliability validation.
The CD4000B series was engineered for ruggedized digital interface applications in industrial, aerospace, and instrumentation systems-prioritizing wide VDD range, high noise immunity, and extended temperature operation over speed.
FAQ
What is the maximum operating frequency supported by CD4010BM96?
The CD4010BM96 is not characterized for maximum clock frequency; it is a static logic device intended for control and buffering-not synchronous clock distribution. Its typical propagation delay is 80 ns at VDD = 10 V, supporting reliable operation up to ~5 MHz for repetitive digital signals with adequate setup/hold margins. For the CD4010BM96, focus remains on DC-coupled level translation and fan-out rather than high-speed timing.
Does CD4010BM96 support dual-supply operation (e.g., VDD = 5 V, VSS = –5 V)?
No, the CD4010BM96 is specified only for single-supply operation with VSS referenced to ground (0 V). Its internal structure requires VSS = 0 V and VDD ≥ 3 V. Applying negative voltage to VSS violates absolute maximum ratings and may cause latch-up or permanent damage to the CD4010BM96.
Can CD4010BM96 drive LED indicators directly?
Yes-the CD4010BM96 can sink or source up to 4.2 mA at VDD = 15 V, sufficient for low-current indicator LEDs (e.g., 2 mA @ 2 V forward drop with 5.6 kΩ series resistor). However, for higher-brightness LEDs or multiplexed displays, external drivers are recommended to avoid exceeding output current limits and ensure consistent CD4010BM96 performance.
Is CD4010BM96 RoHS compliant and lead-free?
Yes, CD4010BM96 is RoHS compliant with lead finish NIPDAU (nickel/palladium/gold), per TI's packaging documentation. It meets JEDEC J-STD-020 moisture sensitivity level 1 (unlimited floor life at ≤30 °C/60% RH), and is rated for reflow up to 260 °C peak. This applies specifically to the CD4010BM96 part number as shipped in tape-and-reel format (2500 units/reel).
How does CD4010BM96 differ from CD4009UB?
The CD4010BM96 contains six non-inverting buffers, whereas the CD4009UB contains six inverting buffers. Both share identical pinout, supply range, speed, and package options-but their logic functions are complementary. Swapping them without inverting logic elsewhere will invert all six signal paths, causing functional failure unless compensated in firmware or upstream logic. The CD4010BM96 is not a drop-in replacement for CD4009UB.
CD4010BM96 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Series:
- 4000B
- Package/Case:
- 16-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Logic Type:
- Buffer, Non-Inverting
- Number of Elements:
- 6
- Number of Bits per Element:
- 1
- Input Type:
- -
- Output Type:
- Push-Pull
- Current - Output High, Low:
- 3mA, 36mA
- Voltage - Supply:
- 3V ~ 18V
- Operating Temperature:
- -55°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
CD4010BM96 FAQ
1.How can I place an order for CD4010BM96 through Aetrix?
Please submit a Request for Quotation (RFQ) for CD4010BM96 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CD4010BM96 reliable?
The price and inventory of CD4010BM96 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CD4010BM96 is usually 5 days.
3.What payment methods are accepted for CD4010BM96?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CD4010BM96 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CD4010BM96?
CD4010BM96 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CD4010BM96 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CD4010BM96?
For technical support, including CD4010BM96 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CD4010BM96 requirements.
6.How does Aetrix verify that CD4010BM96 is sourced from the original manufacturer or authorized distributors?
All CD4010BM96 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CD4010BM96 meets industry standards.
7.What is the process for return or replacement of CD4010BM96?
All CD4010BM96 units undergo pre-shipment inspection (PSI). If there is an issue with CD4010BM96, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CD4010BM96 part is unused and in its original packaging.
Return procedure for CD4010BM96:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CD4010BM96 Tags
-
SN74LVC1G17DBVR
Texas Instruments
-
SN74LVC1G07DCKR
Texas Instruments
-
SN74LVC1G17DCKR
Texas Instruments
-
SN74LVC1G07DBVR
Texas Instruments
-
SN74LVC1G125DCKR
Texas Instruments
-
SN74AHCT1G126DBVR
Texas Instruments
-
SN74LVC1G125DBVR
Texas Instruments
-
SN74AHCT1G125DBVR
Texas Instruments
-
SN74LVC2G17DBVR
Texas Instruments
-
SN74LVC2G07DCKR
Texas Instruments
-
SN74LVC1G34DCKR
Texas Instruments
-
SN74LVC2G17DCKR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
