Texas Instruments CD4010BM96E4

Overview

CD4010BM96E4 from Texas Instruments is a hex non-inverting buffer IC in the CD4000B logic family, designed for level-shifting and fan-out expansion in CMOS systems. It operates over -55°C to +125°C, supports 3V–18V supply range, delivers ±4.2mA output drive at V_DD = 15V, and features high noise immunity with input thresholds at 50% V_DD. It is used in industrial control interfaces requiring voltage-level translation between legacy TTL and modern low-power CMOS subsystems.

For engineers reviewing the CD4010BM96E4 datasheet, CD4010BM96E4 pinout, CD4010BM96E4 application, or CD4010BM96E4 equivalent, this page provides verified package mapping (SOIC-16), confirmed DC electrical specs, functional role as a non-inverting buffer array, and validated alternatives for voltage-tolerant digital interface design.

Technical Context

The CD4010BM96E4 implements six independent CMOS non-inverting buffer stages using enhancement-mode p-channel and n-channel MOSFETs in a complementary configuration. Each stage provides true logic-level pass-through with no inversion, enabling signal buffering without polarity change.

It belongs to the CD4000B series, characterized by wide V_DD range (3V–18V), high input impedance (>100 MΩ), static discharge protection on all inputs, and compatibility with both CMOS and TTL logic families when operated within appropriate voltage margins.

Key Specifications

Pinout & Package

CD4010BM96E4 is supplied in a 16-pin SOIC (Small Outline Integrated Circuit) package per TI drawing D, with 3.9 mm body width, 1.75 mm height, and 1.27 mm lead pitch. The package is RoHS-compliant, NIPDAU lead finish, and rated MSL Level-1 (unlimited floor life).

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar non-inverting buffer applications.

Compared with CD4010BM and MC14010BDR2G, the CD4010BM96E4 offers optimized logistics for high-volume SMT lines via its 2500-piece tape-and-reel format, maintains the fastest propagation delay in the family, and carries TI's extended temperature certification without derating.

Availability

CD4010BM96E4 is available at Aetrix Electronics and suitable for industrial automation, motor control, and test equipment applications requiring stable component supply across extended temperature ranges and long product lifecycles.

Supply support for CD4010BM96E4 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Texas Instruments is a global semiconductor company headquartered in Dallas, Texas, specializing in analog, embedded processing, and logic solutions for industrial, automotive, and communications markets.

The CD4000B series was developed to deliver robust, wide-supply-range CMOS logic for harsh-environment applications where reliability and voltage flexibility outweigh speed requirements.

FAQ

What is the maximum operating frequency supported by the CD4010BM96E4?

The CD4010BM96E4 is not characterized for maximum clock frequency; it is a static logic device intended for asynchronous signal buffering. Its typical propagation delay is 80 ns at V_DD = 15V and C_L = 50 pF, supporting reliable operation up to approximately 1 MHz in edge-sensitive applications. For higher-frequency use, designers should verify setup/hold timing margins against their specific load and trace conditions. The CD4010BM96E4 does not include internal clock circuitry or synchronous functionality.

Can the CD4010BM96E4 drive LEDs directly?

Yes, the CD4010BM96E4 can drive standard 2 mA–5 mA indicator LEDs directly when V_DD ≥ 5V, using a series current-limiting resistor. At V_DD = 15V and I_OL = −4.2 mA, it safely sinks LED current without external transistors. However, for high-brightness or high-current LEDs (>10 mA), an external driver stage is recommended. Always confirm forward voltage and current requirements against the CD4010BM96E4's output voltage drop under load.

Is the CD4010BM96E4 pin-compatible with the CD4009UB series?

No, the CD4010BM96E4 is not pin-compatible with the CD4009UB series. While both are 16-pin SOIC devices, the CD4009UB contains six inverting buffers (NOT gates), resulting in different input/output pin assignments. The CD4010BM96E4 has inputs on pins 1,3,5,9,11,13 and outputs on 2,4,6,10,12,14; the CD4009UB swaps these roles. Substituting one for the other without board revision will invert all signals.

Does the CD4010BM96E4 require external pull-up or pull-down resistors on unused inputs?

Unused inputs on the CD4010BM96E4 must be terminated to either V_DD or V_SS - floating CMOS inputs can cause excessive supply current, oscillation, or increased EMI susceptibility. TI recommends connecting each unused input directly to V_DD (for logic-high default) or V_SS (for logic-low), rather than relying on weak pull-ups. This ensures stable biasing and avoids undefined states that could compromise the CD4010BM96E4's static power performance.

What is the meaning of the "E4" suffix in CD4010BM96E4?

The "E4" suffix in CD4010BM96E4 indicates a TI-specific packaging and marking variant: it denotes tape-and-reel packaging per TI's standard E4 specification (RoHS-compliant, NIPDAU finish, SOIC-D package), with part marking including date code and traceability data. It is functionally identical to CD4010BM96 but differs in reel orientation (Q1 quadrant), carrier tape dimensions, and labeling format - all defined in TI's Packaging Information documents. The CD4010BM96E4 remains fully interchangeable with CD4010BM96 in circuit design.