My Inquiry
My Account
Infineon Technologies CDM10V4XTSA1
- Part No.:
- CDM10V4XTSA1
- Manufacturer:
- Infineon Technologies
- Category:
- LED Drivers
- Package:
- SOT-23-6
- Datasheet:
-
CDM10V4XTSA1.pdf
- Description:
- IC DIMMER FLEXIBLE SOT23-6
- Quantity:
- Payment:
- Shipping:
Inventory:5,709
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CDM10V4XTSA1 from Infineon Technologies is a fully integrated 0–10 V dimming interface IC in SOT-23-6 package, designed to convert analog dimmer voltage (0–10 V) into a 2 kHz, 5 mA PWM current signal for driving external optocouplers in LED drivers. It features 100 µA dimmer bias current, dim-to-off functionality below 1 V, and ±3% dimming accuracy across temperature and unit variation.
For engineers reviewing the CDM10V4XTSA1 datasheet, CDM10V4XTSA1 pinout, CDM10V4XTSA1 application, or CDM10V4XTSA1 equivalent, this device serves as a drop-in replacement for discrete 0–10 V interface circuits-reducing BOM count, PCB footprint, and inter-unit calibration effort in commercial luminaires, troffers, and DALI-compatible lighting systems.
Technical Context
The CDM10V4XTSA1 integrates an internal LDO, bandgap reference, 8-bit ADC, digital FSM, and PWM generator with current-source output. Its analog front-end senses Rdim+ voltage (0–10 V), digitizes it, and maps linearly to 0–100% PWM duty cycle at fixed 2 kHz frequency.
It delivers a regulated 5 mA sink current on Iout with ±10% tolerance, supports 11–25 V Vcc input, operates from –40 °C to +105 °C ambient, and includes UVLO and ESD protection (1500 V HBM, 500 V CDM).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Vcc Range | 11–25 V: Enables direct use with common 12/24 V lighting rails without external regulation. |
| PWM Frequency | 2 kHz ±6%: Eliminates audible noise while ensuring compatibility with standard optocoupler response times. |
| Iout Current | 5 mA ±10%: Provides sufficient drive strength for standard PC817/PC818-class optocouplers without external amplification. |
| Dimmer Bias Current | 100 µA: Matches typical 0–10 V dimmer output impedance, minimizing loading error and linearity drift. |
| Dimming Accuracy | ±3%: Ensures consistent light output across units and temperature without per-unit trimming. |
| Dim-to-Off Threshold | <1 V: Guarantees full LED shutdown in low-signal or open-circuit dimmer failure conditions. |
| ESD Robustness | 1500 V HBM: Protects against handling-induced discharge during assembly and field service. |
Pinout & Package
SOT-23-6 package: 2.9 mm × 1.6 mm × 1.1 mm body, thermally enhanced pad, RoHS-compliant, JEDEC qualified for industrial lighting applications.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 VCC | Supply Input | Accepts 11–25 V DC; powers internal LDO and logic; requires local 100 nF decoupling. |
| 2 GND | Ground Reference | Primary return path for internal circuitry and Iout current sink. |
| 3 Iout | PWM Current Output | Active-low 5 mA PWM sink output; connects directly to optocoupler anode. |
| 4 NC | No Connect | Internally tied to GND; must be externally connected to ground for thermal and noise stability. |
| 5 NC | No Connect | Internally tied to GND; must be externally connected to ground for thermal and noise stability. |
| 6 Rdim+ | Dimmer Voltage Sense | Inputs 0–10 V analog signal; sources 100 µA bias current; max voltage = VCC + 0.5 V. |
Key Features
| Feature | Design Value |
|---|---|
| Fully integrated 0–10 V interface | Replaces ≥7 discrete components (op-amps, transistors, resistors, capacitors) in legacy designs. |
| Digital signal processing core | 8-bit ADC + FSM ensures <±3% dimming linearity and eliminates analog drift over time/temperature. |
| Thermally optimized SOT-23-6 | Supports 100% PWM duty cycle at 25 V Vcc with ≤105 °C ambient via recommended copper pour area. |
| Robust input protection | Rdim+ pin tolerates up to VCC + 0.5 V; Schottky diode (e.g., MMSD301T1G) recommended for active dimming. |
| Low quiescent current | 1 mA ICC enables operation in always-on lighting control nodes without excessive standby loss. |
Applications
| Commercial Troffers | Office Downlights |
|---|---|
Use Scenario: Surface-mounted ceiling troffers in open-plan offices requiring smooth 0–10 V dimming from centralized building management systems. IC Role / Device Role / Timing Role: Translates 0–10 V analog command into isolated 5 mA PWM current to drive secondary-side LED driver enable input. Use Value: Eliminates external op-amp and transistor stages, reducing PCB area by >40% and enabling 12 mm height constraint compliance. | Use Scenario: Recessed downlights in corporate lobbies where dimming consistency across 50+ fixtures is critical for uniform ambiance. IC Role / Device Role / Timing Role: Provides calibrated 2 kHz PWM output with ±3% unit-to-unit accuracy to ensure identical light output at each dimming level. Use Value: Removes need for fixture-level calibration, cutting manufacturing test time by 3 minutes/unit. |
| Undercabinet Lighting | DALI-2 Gateway Interface |
Use Scenario: Low-profile undercabinet LED strips in retail kitchens, powered from 24 V DC with analog dimming control. IC Role / Device Role / Timing Role: Interfaces 0–10 V wall dimmer to constant-current LED driver via optocoupler-isolated PWM input. Use Value: Supports dim-to-off behavior (<1 V cutoff) for true black-level control, meeting UL 1598 Class P requirements. | Use Scenario: DALI-2 lighting controllers converting digital DALI commands into legacy 0–10 V analog outputs for retrofit installations. IC Role / Device Role / Timing Role: Acts as analog output stage-accepts DAC voltage from microcontroller and converts to standardized 0–10 V compliant current-mode signal. Use Value: Enables single-chip DALI-to-analog translation without external current buffers or feedback loops. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 0–10 V dimming interface applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TI UCC27511DR | High-speed gate driver (4 A peak); no built-in ADC, PWM generator, or dimmer bias current. | Requires external op-amp, comparator, and current source to replicate CDM10V4XTSA1 function. | Only suitable when existing design already implements analog signal conditioning and needs only fast switching. |
| ON Semi NCL30160DR2G | Dedicated LED driver with integrated 0–10 V input; lacks isolated current-output capability and requires optocoupler bypass. | Directly drives LEDs but cannot interface to third-party LED drivers with optocoupler-based dim inputs. | Preferred only for new, self-contained LED modules-not for retrofit or system-level dimming interface roles. |
Compared with UCC27511DR and NCL30160DR2G, the CDM10V4XTSA1 uniquely combines precision analog sensing, digital PWM generation, and 5 mA current-source output in one SOT-23-6 package-enabling true plug-and-play 0–10 V interface functionality without supporting circuitry.
Availability
CDM10V4XTSA1 is available at Aetrix Electronics and suitable for commercial troffers, office downlights, and DALI-2 gateway interfaces requiring stable component supply, long-term lifecycle support, and JEDEC-qualified reliability.
Supply support for CDM10V4XTSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive, and industrial control ICs, with global manufacturing and quality certification to ISO/TS 16949 and IECQ QC 080000.
The CDM10V4XTSA1 belongs to Infineon's lighting interface product line, engineered specifically to simplify analog dimming integration in energy-efficient LED luminaires while meeting IEC 62384 and EN 61000-4-5 surge immunity requirements.
FAQ
What is the minimum Rdim+ voltage required to activate dimming?
The CDM10V4XTSA1 enters active dimming mode at Rdim+ ≥ 1 V. Below 1 V, it asserts dim-to-off behavior-driving Iout to zero regardless of PWM timing. This threshold is guaranteed across –40 °C to +105 °C ambient and does not require external hysteresis or pull-up components.
Can CDM10V4XTSA1 drive optocouplers directly without external components?
Yes-the 5 mA ±10% Iout current source is designed to directly drive standard PC817, TLP185, or VO615A optocouplers. No series resistor or buffer transistor is needed. A 4.7 nF capacitor on Rdim+ is recommended for noise filtering, and a Schottky diode (e.g., MMSD301T1G) is advised if Rdim+ may exceed VCC during active dimming.
Does CDM10V4XTSA1 support reverse polarity protection on VCC or Rdim+?
No-the device has no internal reverse-polarity protection. VCC must be connected with correct polarity (11–25 V positive to Pin 1); applying reverse voltage will damage the IC. Rdim+ pin tolerates up to VCC + 0.5 V but not negative voltage-external clamping diodes are required in systems prone to wiring errors or inductive kickback.
How does thermal performance scale with PWM duty cycle and Vcc?
Power dissipation ranges from 6.05 mW (1% duty) to 160 mW (100% duty at 25 V Vcc). The SOT-23-6 package requires ≥25 mm² copper pour connected to Pin 2 (GND) for reliable operation at 100% duty above 60 °C ambient, per Figure 3 in the Infineon datasheet V1.1.
CDM10V4XTSA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- SOT-23-6
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Type:
- AC DC Offline Switcher
- Topology:
- Flyback
- Internal Switch(s):
- No
- Number of Outputs:
- 1
- Voltage - Supply (Min):
- 11V
- Voltage - Supply (Max):
- 25V
- Voltage - Output:
- -
- Current - Output / Channel:
- -
- Frequency:
- -
- Dimming:
- Yes
- Applications:
- General Purpose
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-SOT23-6
CDM10V4XTSA1 FAQ
1.How can I place an order for CDM10V4XTSA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for CDM10V4XTSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CDM10V4XTSA1 reliable?
The price and inventory of CDM10V4XTSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CDM10V4XTSA1 is usually 5 days.
3.What payment methods are accepted for CDM10V4XTSA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CDM10V4XTSA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CDM10V4XTSA1?
CDM10V4XTSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CDM10V4XTSA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CDM10V4XTSA1?
For technical support, including CDM10V4XTSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CDM10V4XTSA1 requirements.
6.How does Aetrix verify that CDM10V4XTSA1 is sourced from the original manufacturer or authorized distributors?
All CDM10V4XTSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CDM10V4XTSA1 meets industry standards.
7.What is the process for return or replacement of CDM10V4XTSA1?
All CDM10V4XTSA1 units undergo pre-shipment inspection (PSI). If there is an issue with CDM10V4XTSA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CDM10V4XTSA1 part is unused and in its original packaging.
Return procedure for CDM10V4XTSA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CDM10V4XTSA1 Tags
-
BCR402RE6327HTSA1
Infineon Technologies
-
BCR430UXTSA2
Infineon Technologies
-
BCR420UE6433HTMA1
Infineon Technologies
-
BCR420UE6327HTSA1
Infineon Technologies
-
BCR421UE6327HTSA1
Infineon Technologies
-
LYT1604D-TL
Power Integrations
-
HV9910CLG-G
Microchip Technology
-
CL2N8-G
Microchip Technology
-
BCR420UW6-7
Diodes Incorporated
-
BCR421UW6-7
Diodes Incorporated
-
BCR420UFD-7
Diodes Incorporated
-
BCR421UFD-7
Diodes Incorporated
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
