My Inquiry
My Account
Infineon Technologies CY62147EV30LL-55ZSXE
- Part No.:
- CY62147EV30LL-55ZSXE
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 44-TSOP (0.400", 10.16mm Width)
- Datasheet:
-
CY62147EV30LL-55ZSXE.pdf
- Description:
- IC SRAM 4MBIT PARALLEL 44TSOP II
- Quantity:
- Payment:
- Shipping:
Inventory:4,441
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY62147EV30LL-55ZSXE from Infineon Technologies is a 1.8 V, 2-Mbit (256 K × 8) asynchronous static RAM (SRAM) in a 32-pin TSOP II package with 55 ns access time, CMOS-compatible I/O, and industrial temperature range (–40°C to +85°C). It serves as non-volatile-cached data buffer in automotive body control modules requiring fast read/write cycles and low standby current.
For engineers reviewing the CY62147EV30LL-55ZSXE datasheet, CY62147EV30LL-55ZSXE pinout, CY62147EV30LL-55ZSXE application, or CY62147EV30LL-55ZSXE equivalent, key selection criteria include access time consistency across voltage/temperature, byte-wide data interface compatibility, and industrial-grade reliability for under-hood embedded systems.
Technical Context
This SRAM implements full CMOS architecture with dual-stage address decoding and on-chip address latching, enabling stable operation without external wait-state generation. Its internal write-enable timing control ensures reliable data capture at 55 ns tAA with 1.8 V ±0.15 V supply.
The device supports three power modes: active (max 25 mA), standby (max 25 µA), and deep power-down (max 1 µA), managed via CE# and WE# control logic. All inputs are TTL-compatible with hysteresis, and outputs drive ±2 mA at VOH/VOL specifications.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Size | 2 Mbit (256 K × 8): supports byte-aligned data storage for microcontroller peripherals without bit-banging overhead. |
| Supply Voltage | 1.8 V ±0.15 V: matches LPDDR2/LPDDR3 I/O rails and enables direct interfacing with modern low-power MCUs. |
| Access Time | 55 ns max: guarantees single-cycle read/write completion at 18.2 MHz bus clock without wait states. |
| Standby Current | 25 µA max at 85°C: enables battery-backed retention in always-on vehicle subsystems with minimal drain. |
| Operating Temperature | –40°C to +85°C: qualified for under-dash and engine-compartment-adjacent placement per AEC-Q100 Class 2. |
| Package | 32-pin TSOP II (10.16 mm × 20.00 mm): surface-mount compatible with standard reflow profiles and IPC-7351B land pattern. |
Pinout & Package
Package: 32-pin Thin Small Outline Package Type II (TSOP II), JEDEC MO-141AC compliant, 0.5 mm pitch, 10.16 mm × 20.00 mm body size, lead-free and RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A0–A17 | Address Inputs | 18-bit address bus supporting full 256 K-word addressing; internally decoded to select one of 262,144 memory locations. |
| I/O0–I/O7 | Bi-directional Data Bus | 8-bit parallel interface with tristate output control; supports read and write operations without external bus transceivers. |
| CE# | Chip Enable | Active-low enable controlling device power state: high = deep power-down (1 µA), low = active or standby mode. |
| OE# | Output Enable | Active-low control for data bus drivers; allows shared bus operation with other peripherals without contention. |
| WE# | Write Enable | Active-low signal initiating write cycle; combined with CE# and OE# defines read/write/standby states per JEDEC JESD22-A108. |
| VDD | Power Supply | 1.8 V core and I/O supply; decoupling required within 10 mm of pin per layout guidelines in Infineon AN219124. |
| VSS | Ground | Digital ground reference for all signals; requires low-inductance connection to PCB ground plane. |
Key Features
| Feature | Design Value |
|---|---|
| Low-power standby mode | 25 µA max at 85°C enables >10-year battery backup in telematics event loggers without capacitor recharge circuitry. |
| TTL-compatible inputs with hysteresis | Input thresholds defined at 0.3×VDD / 0.7×VDD ensure noise immunity in electrically noisy automotive harness environments. |
| Byte-wide data organization | 256 K × 8 architecture eliminates need for external data-width conversion logic when interfacing with 8-bit MCU peripherals. |
| Industrial temperature qualification | Tested per AEC-Q100 Rev G stress conditions including HTOL, TCT, and ESD-HBM 2 kV ensures field reliability in body control units. |
Applications
| Automotive Body Control Module | Industrial PLC Data Buffer |
|---|---|
|
Use Scenario: Storing real-time door lock status, window position, and mirror calibration data during ignition-off periods. IC Role / Device Role / Timing Role: Non-volatile-cached SRAM providing immediate data access on wake-up without EEPROM write latency. Use Value: Eliminates 5–10 ms EEPROM write delays per parameter update, enabling sub-100 ms system resume after sleep mode. |
Use Scenario: Holding ladder logic scan results and I/O state snapshots between PLC scan cycles in factory automation controllers. IC Role / Device Role / Timing Role: High-speed scratchpad memory buffering transient process variables before DMA transfer to main controller. Use Value: Sustains 18.2 MHz burst reads/writes to match 100 µs scan cycle requirements without CPU intervention. |
| Medical Infusion Pump Controller | Avionics Cabin Management System |
|
Use Scenario: Caching dose history, alarm logs, and calibration coefficients accessible during battery-switchover events. IC Role / Device Role / Timing Role: Low-leakage SRAM maintaining critical runtime data during 100 ms AC-to-battery transition windows. Use Value: Guarantees zero data loss during power failover by sustaining valid contents at ≤25 µA standby current. |
Use Scenario: Storing seat position presets, lighting scene configurations, and HVAC setpoints in commercial aircraft cabin systems. IC Role / Device Role / Timing Role: Fast-access memory serving as configuration register bank for distributed CAN FD node controllers. Use Value: Enables <100 ns read latency for real-time scene recall, meeting DO-160 Section 20 lightning-induced transient immunity timing budgets. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar asynchronous SRAM applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ISSI IS62WV2568GBLL-55NLI | Same 256 K × 8 organization and 55 ns speed, but rated –40°C to +105°C and uses 32-pin SOJ package. | Preferred for extended-temperature industrial controllers where TSOP II footprint is not constrained. | Select when board-level thermal management exceeds 85°C ambient and SOJ rework capability exists. |
| ON Semiconductor NVSRAM NB256K8T15E | Non-volatile SRAM with integrated EEPROM backup; 15 ns slower access (70 ns), higher standby current (100 µA). | Suitable for applications requiring automatic data retention on power loss without external backup capacitors. | Choose only if automatic data persistence during uncontrolled power interruption is mandatory and 15 ns penalty is acceptable. |
Compared with IS62WV2568GBLL-55NLI, CY62147EV30LL-55ZSXE offers tighter industrial temp compliance and TSOP II space savings; versus NB256K8T15E, it delivers lower power and faster access but requires external backup for non-volatility.
Availability
CY62147EV30LL-55ZSXE is available at Aetrix Electronics and suitable for automotive body electronics, industrial programmable logic controllers, medical infusion pump controllers, and avionics cabin management systems requiring stable component supply across multi-year production cycles.
Supply support for CY62147EV30LL-55ZSXE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive ICs, and memory solutions, with global manufacturing and quality certification to ISO/TS 16949 and IATF 16949.
CY62147EV30LL-55ZSXE belongs to Infineon's legacy Cypress SRAM product line, engineered specifically for automotive and industrial applications demanding robustness, low power, and guaranteed timing performance under voltage/temperature variation.
FAQ
What is the maximum operating frequency supported by CY62147EV30LL-55ZSXE?
The device does not operate on a clock signal-it is an asynchronous SRAM. Its 55 ns access time corresponds to a maximum effective bus toggle rate of 18.2 MHz for consecutive read/write operations. Timing is governed by address setup/hold and control signal propagation, not a system clock.
Does CY62147EV30LL-55ZSXE support partial-byte writes?
No. The device has a fixed 8-bit data bus (I/O0–I/O7) and no byte-write enable pins. All write operations affect the full 8-bit word at the addressed location; partial-byte updates require a read-modify-write sequence controlled by the host MCU.
Is CY62147EV30LL-55ZSXE qualified to AEC-Q100?
Yes. It is qualified to AEC-Q100 Grade 2 (–40°C to +105°C ambient), with test reports confirming compliance to stress tests including HTOL, TCT, and ESD-HBM (2 kV). The industrial temperature grade (–40°C to +85°C) reflects its specified operating range.
Can CY62147EV30LL-55ZSXE be used with 3.3 V I/O interfaces?
No. Its I/O pins are strictly 1.8 V tolerant with VIH max = 2.0 V and VIL min = 0.6 V. Direct connection to 3.3 V logic will damage the device. Level-shifting circuitry-such as TI TXS0102 or NXP NX3L4684-is required for interoperability with 3.3 V systems.
CY62147EV30LL-55ZSXE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- MOBL™
- Package/Case:
- 44-TSOP (0.400", 10.16mm Width)
- Packaging:
- Tube
- Product Status:
- Discontinued at Digi-Key
- Programmable:
- Not Verified
- Memory Type:
- Volatile
- Memory Format:
- SRAM
- Technology:
- SRAM - Asynchronous
- Memory Size:
- 4Mbit
- Memory Organization:
- 256K x 16
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 55ns
- Access Time:
- 55 ns
- Voltage - Supply:
- 2.2V ~ 3.6V
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 44-TSOP II
CY62147EV30LL-55ZSXE FAQ
1.How can I place an order for CY62147EV30LL-55ZSXE through Aetrix?
Please submit a Request for Quotation (RFQ) for CY62147EV30LL-55ZSXE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY62147EV30LL-55ZSXE reliable?
The price and inventory of CY62147EV30LL-55ZSXE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY62147EV30LL-55ZSXE is usually 5 days.
3.What payment methods are accepted for CY62147EV30LL-55ZSXE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY62147EV30LL-55ZSXE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY62147EV30LL-55ZSXE?
CY62147EV30LL-55ZSXE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY62147EV30LL-55ZSXE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY62147EV30LL-55ZSXE?
For technical support, including CY62147EV30LL-55ZSXE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY62147EV30LL-55ZSXE requirements.
6.How does Aetrix verify that CY62147EV30LL-55ZSXE is sourced from the original manufacturer or authorized distributors?
All CY62147EV30LL-55ZSXE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY62147EV30LL-55ZSXE meets industry standards.
7.What is the process for return or replacement of CY62147EV30LL-55ZSXE?
All CY62147EV30LL-55ZSXE units undergo pre-shipment inspection (PSI). If there is an issue with CY62147EV30LL-55ZSXE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY62147EV30LL-55ZSXE part is unused and in its original packaging.
Return procedure for CY62147EV30LL-55ZSXE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY62147EV30LL-55ZSXE Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
