My Inquiry
My Account
Infineon Technologies CY7C65210A-24LTXI
- Part No.:
- CY7C65210A-24LTXI
- Manufacturer:
- Infineon Technologies
- Category:
- Controllers
- Package:
- 24-UFQFN Exposed Pad
- Datasheet:
-
CY7C65210A-24LTXI.pdf
- Description:
- USB FULL-SPEED PERIPHERALS
- Quantity:
- Payment:
- Shipping:
Inventory:4,885
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
CY7C65210A-24LTXI from Infineon is a USB 2.0 Full-speed (12 Mbps) Billboard controller IC compliant with USB Billboard Device Class v1.21, featuring integrated 48-MHz oscillator, 2560-byte configurable flash, 11 GPIOs, and single-channel I²C interface operating up to 400 kHz. It supports bus- or self-powered operation across 1.71–5.5 V, delivers native Windows 10 Billboard driver support, and targets USB Type-C Alternate Mode containers such as docking stations and monitors.
For engineers reviewing the CY7C65210A-24LTXI datasheet, CY7C65210A-24LTXI pinout, CY7C65210A-24LTXI application, or CY7C65210A-24LTXI equivalent, key selection criteria include Billboard Class v1.21 compliance, 11-GPIO count, QFN-24 package compatibility, suspend/wakeup omission versus legacy CY7C65210, and I²C-only serial interface-critical for Type-C accessory firmware configuration and error reporting.
Technical Context
The CY7C65210A implements a dedicated USB Billboard device stack that enumerates exclusively under USB Device Class 0x0B (Miscellaneous), Subclass 0x00, Protocol 0x03 (Billboard), using pre-programmed descriptors stored in on-chip flash. It lacks UART functionality-unlike CY7C65217A-and relies solely on its single I²C master interface (SCB0) for host-side configuration and status exchange.
Its power architecture includes dual regulators: a VBUS-to-VCCD LDO (3.15–5.25 V input → 1.8 V output) and a wide-input VDDD supply rail (1.71–5.5 V) powering core logic and I/O. The absence of SUSPEND/WAKEUP pins in the A-version (vs. CY7C65210) reflects removal of suspend-state signaling per Billboard v1.21 specification requirements.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| USB Speed | Full-speed (12 Mbps); meets USB 2.0 certification for Billboard enumeration without external transceiver. |
| Billboard Spec | v1.21; enables correct descriptor reporting for USB Type-C Alternate Mode failure scenarios per USB PD 3.0. |
| I²C Interface | Single master, up to 400 kHz; used exclusively for host MCU to read/write flash-stored descriptors and status registers. |
| GPIO Count | 11 programmable pins; supports custom LED control, button sensing, or auxiliary signaling in dongle/dock designs. |
| Flash Memory | 2560 bytes; stores Billboard-specific descriptors (bcdVersion, wVSID, wVSI, bVENDORINFO), writable via I²C. |
| Supply Range | VDDD = 1.71–5.5 V; allows direct connection to 3.3 V or 5 V system rails without level-shifting. |
| ESD Rating | 2.2 kV HBM; sufficient for consumer-facing USB port ESD robustness without external protection. |
Pinout & Package
Package: 24-lead QFN (4.0 mm × 4.0 mm, 0.5-mm pitch, 0.55-mm height), RoHS-compliant, exposed thermal pad.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1–6, 19–23 | GPIO | Tristate-capable general-purpose I/O; GPIO_1 supports wakeup from suspend (if enabled), others configurable as input/output/pull-up/down. |
| 7, 8, 9 | GPIO | GPIO_11, GPIO_12, GPIO_13: all tristate in CY7C65210A (no SUSPEND/WAKEUP function); replace legacy power/suspend signals. |
| 10, 11 | USBIO | USBDP/USBDM: integrated 1.5-kΩ pull-up on USBDP + on-die 27-Ω series termination; no external resistors needed. |
| 12, 13, 16 | Power | VCCD (1.8 V LDO output), VSSD (digital ground ×3); decoupling required at VCCD with 1 µF capacitor. |
| 14 | Reset | nXRES: active-low asynchronous reset; internal pull-up; can be left floating if unused. |
| 15 | Power | VBUS: 3.15–5.25 V input to internal LDO; powers VCCD and enables bus-powered operation. |
| 17 | Power | VSSA: analog ground; must be connected to system ground plane but isolated from noisy digital returns where possible. |
| 18 | Debug | Debug I/O: reserved for factory debug; must remain floating in end application. |
| 21, 22 | SCB/GPIO | SCB_1/GPIO_3 (SCL), SCB_2/GPIO_4 (SDA): dedicated I²C bus pins; not multiplexed with other functions. |
| 24 | Power | VDDD: primary core/interface supply (1.71–5.5 V); powers GPIOs, I²C, USB PHY, and flash controller. |
Key Features
| Feature | Design Value |
|---|---|
| Native Billboard Class Support | Enumerates automatically as USB Class 0x0B Subclass 0x00 Protocol 0x03-no host driver development required on Windows 10+. |
| Integrated 48-MHz Oscillator | Eliminates external crystal and load capacitors; reduces BOM cost and PCB area while meeting USB timing jitter specs. |
| Configurable Flash Descriptor Store | 2560-byte flash retains vendor ID, product ID, alternate mode failure strings, and VSI data across power cycles. |
| Wide VDDD Supply Range | 1.71–5.5 V operation enables direct interfacing with 1.8 V, 3.3 V, or 5 V host MCUs without level shifters. |
| On-Die USB Termination | Integrated 27-Ω series resistors on USBDP/USBDM and 1.5-kΩ pull-up on USBDP meet USB-IF electrical compliance. |
Applications
| USB-C Docking Station | USB-C Monitor |
|---|---|
|
Use Scenario: Dock connects laptop to HDMI, Ethernet, USB-A peripherals; reports Alternate Mode failures when DisplayPort tunneling fails. IC Role / Device Role / Timing Role: Billboard controller providing standardized USB descriptor-based failure reporting to OS during USB PD negotiation. Use Value: Enables user-visible error messages (e.g., "DisplayPort Alternate Mode not supported") instead of silent connection drop. |
Use Scenario: Monitor with USB-C upstream port negotiates video/audio/data; reports cable or source capability mismatches. IC Role / Device Role / Timing Role: Dedicated Billboard device responding to GET_STATUS requests with vendor-defined failure strings. Use Value: Eliminates need for custom firmware/hardware to interpret PD contract failures-reduces qualification time. |
| USB-C Dongle | Automotive USB-C Rear Seat Port |
|
Use Scenario: Compact adapter converting USB-C to HDMI/VGA; must signal "No DisplayPort Support" when plugged into non-compliant host. IC Role / Device Role / Timing Role: Standalone Billboard IC handling all descriptor traffic without MCU intervention. Use Value: Reduces bill-of-materials by replacing MCU + software stack with single-configurable IC. |
Use Scenario: In-vehicle USB-C port supporting video mirroring; reports thermal or voltage faults during high-power charging + video use. IC Role / Device Role / Timing Role: Robust Billboard interface operating across –40°C to 105°C with automotive-grade ESD (2.2 kV HBM). Use Value: Meets automotive environmental requirements while delivering standardized fault visibility to infotainment UI. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Billboard device applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| CY7C65210-24LTXI | Billboard v1.1; includes SUSPEND/WAKEUP pins; 9 GPIOs; requires external crystal. | Supports legacy suspend signaling; suited for systems needing hardware wake event detection. | Select only if v1.1 compliance and suspend/wakeup I/O are required-CY7C65210A is preferred for new designs. |
| CY7C65217A-24LTXI | Dual SCB (UART + I²C); 9 GPIOs; same v1.21 Billboard spec; no SUSPEND/WAKEUP. | Enables UART-based host communication (e.g., debug logging) alongside Billboard descriptor updates. | Choose when host MCU lacks I²C or requires ASCII command interface-adds UART flexibility at same footprint. |
Compared with CY7C65210-24LTXI, the CY7C65210A-24LTXI removes obsolete suspend signaling and adds two GPIOs, simplifying layout for v1.21-compliant designs; versus CY7C65217A-24LTXI, it trades UART capability for lower gate count and deterministic I²C-only configuration path.
Availability
CY7C65210A-24LTXI is available at Aetrix Electronics and suitable for USB-C docking stations, monitors, dongles, and automotive rear-seat ports requiring stable component supply, full USB-IF Billboard compliance, and industrial temperature range support.
Supply support for CY7C65210A-24LTXI includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a global semiconductor leader headquartered in Munich, Germany, specializing in power systems, sensors, and connectivity solutions for automotive, industrial, and IoT markets.
CY7C65210A belongs to Infineon's EZ-USB™ FX2LP/FX3/CY7C652xx family of USB microcontrollers, designed specifically to offload USB protocol handling and Billboard descriptor management from host processors in USB Type-C accessories.
FAQ
Does CY7C65210A-24LTXI require an external crystal?
No. The CY7C65210A integrates a factory-trimmed 48-MHz oscillator meeting USB Full-speed timing jitter requirements. No external crystal or load capacitors are needed-reducing BOM count and PCB area versus crystal-dependent variants like CY7C65210.
Can CY7C65210A-24LTXI be used in automotive applications?
Yes. The -24LTXI suffix denotes industrial temperature grade (–40°C to +85°C), and the device meets 2.2 kV HBM ESD rating-sufficient for many automotive cabin applications. For under-hood use, verify system-level thermal design and consult Infineon's AEC-Q200 guidance for derivative qualification.
How is the Billboard descriptor content programmed?
Descriptors are stored in the 2560-byte on-chip flash and configured via the I²C interface (SCB0, pins 21/22) using Infineon's USB-Serial Configuration Utility or custom host firmware. No USB reenumeration is required after update-changes take effect on next USB reset or power cycle.
What is the function of the Debug I/O pin (Pin 18)?
Pin 18 is reserved for factory test and debug; it is not functional in end-user applications. Infineon documentation specifies it must be left floating-no pull-up, pull-down, or connection to any signal. Connecting it may disrupt internal test modes or cause undefined behavior.
CY7C65210A-24LTXI Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Package/Case:
- 24-UFQFN Exposed Pad
- Programmable:
- Not Verified
- Protocol:
- USB
- Function:
- Controller
- Interface:
- GPIO, I2C, Serial, UART
- Standards:
- USB 2.0
- Voltage - Supply:
- 1.71V, 3.15V, 4.35V ~ 1.89V, 3.45V, 3.63V
- Current - Supply:
- 20mA
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Supplier Device Package:
- 24-QFN (4x4)
- Grade:
- -
- Qualification:
- -
CY7C65210A-24LTXI FAQ
1.How can I place an order for CY7C65210A-24LTXI through Aetrix?
Please submit a Request for Quotation (RFQ) for CY7C65210A-24LTXI on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for CY7C65210A-24LTXI reliable?
The price and inventory of CY7C65210A-24LTXI are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for CY7C65210A-24LTXI is usually 5 days.
3.What payment methods are accepted for CY7C65210A-24LTXI?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for CY7C65210A-24LTXI transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for CY7C65210A-24LTXI?
CY7C65210A-24LTXI orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your CY7C65210A-24LTXI order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for CY7C65210A-24LTXI?
For technical support, including CY7C65210A-24LTXI datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your CY7C65210A-24LTXI requirements.
6.How does Aetrix verify that CY7C65210A-24LTXI is sourced from the original manufacturer or authorized distributors?
All CY7C65210A-24LTXI products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that CY7C65210A-24LTXI meets industry standards.
7.What is the process for return or replacement of CY7C65210A-24LTXI?
All CY7C65210A-24LTXI units undergo pre-shipment inspection (PSI). If there is an issue with CY7C65210A-24LTXI, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The CY7C65210A-24LTXI part is unused and in its original packaging.
Return procedure for CY7C65210A-24LTXI:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
CY7C65210A-24LTXI Tags
-
PTN5150AHXMP
NXP USA Inc.
-
USB3740B-AI9-TR
Microchip Technology
-
USB3740B-AI2-TR
Microchip Technology
-
USB3300-EZK-TR
Microchip Technology
-
USB3300-EZK
Microchip Technology
-
FUSB340TMX
onsemi
-
FUSB302BMPX
onsemi
-
DP83826IRHBR
Texas Instruments
-
MCP2518FDT-E/QBB
Microchip Technology
-
FUSB302MPX
onsemi
-
MCP2518FDT-E/SL
Microchip Technology
-
FT260Q-R
FTDI, Future Technology Devices International Ltd
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
