Renesas D6417709SHF200BV

Overview

D6417709SHF200BV from Renesas Electronics is a 32-bit RISC microcontroller based on the SuperH™ SH-3 CPU core, featuring an integrated MMU, cache memory, RTC, three serial interfaces (SCI/SCIF), timer units, interrupt controller, and external bus interface. It operates at up to 200 MHz with 1.7–2.0 V core supply and supports little/big-endian memory access for embedded control applications in industrial and office equipment.

For engineers reviewing the D6417709SHF200BV datasheet, D6417709SHF200BV pinout, D6417709SHF200BV application, or D6417709SHF200BV equivalent, key selection considerations include its 208-pin FP-BGA package, 200 MHz maximum operating frequency, 1.7–2.0 V VCC range, integrated memory management unit, and support for synchronous DRAM and PCMCIA interfaces.

Technical Context

The D6417709SHF200BV implements the SH-3 instruction set architecture with 5-stage pipeline execution and supports both little- and big-endian data formats. Its on-chip peripheral modules include a bus state controller (BSC), real-time clock (RTC), three serial communication interfaces (two SCI, one SCIF), and four-channel DMAC with scatter-gather capability.

It integrates a 4 KB unified instruction/data cache with write-back policy and supports multiple clock modes via FRQCR register, including dynamic frequency scaling between 33.34 MHz and 200 MHz. The device uses separate power domains for VCC (core), VCC–PLL1/PLL2 (phase-locked loops), and VCC–RTC (real-time clock oscillator).

Key Specifications

Pinout & Package

The D6417709SHF200BV is housed in a 208-pin Fine-Pitch Ball Grid Array (FP-208C/FP-208E) package with 0.8 mm pitch, designed for high-density PCB layouts and thermal performance in industrial environments.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar 32-bit RISC microcontroller applications.

Compared with D6417709SHF200BV, the SH7750R offers higher clock speed and cache but removes integrated RTC functionality, while the RX65N provides on-chip flash and cryptographic acceleration at the expense of MMU support and external memory bandwidth - making D6417709SHF200BV uniquely suited for Linux-capable, memory-expandable industrial controllers requiring precise timekeeping.

Availability

D6417709SHF200BV is available at Aetrix Electronics and suitable for industrial HMI terminals, networked print servers, medical diagnostic instruments, and automated test equipment requiring stable component supply and long-term lifecycle support.

Supply support for D6417709SHF200BV includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and enterprise applications.

The D6417709SHF200BV belongs to the SH7700 Series SuperH™ RISC engine family, designed specifically for high-performance embedded control systems requiring real-time responsiveness, memory management, and flexible peripheral integration in space-constrained industrial platforms.

FAQ

What is the maximum operating frequency of the D6417709SHF200BV?

The D6417709SHF200BV operates at a maximum frequency of 200 MHz when supplied with a 33.34 MHz external clock input and configured with appropriate PLL multiplication settings. This frequency is validated under specified voltage (1.7–2.0 V VCC) and temperature conditions per Renesas Electrical Characteristics documentation. The D6417709SHF200BV achieves this performance through its optimized SH-3 core pipeline and low-latency on-chip bus architecture.

Does the D6417709SHF200BV include a memory management unit (MMU)?

Yes, the D6417709SHF200BV integrates a full-featured memory management unit (MMU) supporting 4 KB page translation, access permission bits, and TLB management - enabling certified real-time operating systems and Linux-based environments. This MMU is part of the SH-3 core architecture and is fully documented in the SH7709S Hardware Manual. The D6417709SHF200BV leverages this MMU to provide hardware-enforced memory protection and virtual address mapping.

What package type is used for the D6417709SHF200BV?

The D6417709SHF200BV is packaged in a 208-pin Fine-Pitch Ball Grid Array (FP-208C/FP-208E) with 0.8 mm ball pitch. This package supports high I/O density and thermal dissipation requirements typical of industrial embedded applications. Pin assignments and mechanical dimensions are defined in the SH7709S Hardware Manual Rev. 5.00. The D6417709SHF200BV's FP-BGA footprint enables compact PCB design while accommodating its 32-bit external bus and multiple peripheral interfaces.

Can the D6417709SHF200BV operate with a 3.3 V I/O supply?

No, the D6417709SHF200BV does not support 3.3 V I/O operation. Its VCC pins require 1.7–2.0 V, and I/O voltage levels are referenced to this core supply. External level-shifting circuitry is required when interfacing with 3.3 V peripherals such as standard RS-232 transceivers or 3.3 V SDRAM. The D6417709SHF200BV's electrical specifications explicitly define DC characteristics only within the 1.7–2.0 V range, and operation outside this window violates absolute maximum ratings.

Does the D6417709SHF200BV support PCMCIA interface directly?

Yes, the D6417709SHF200BV includes dedicated PCMCIA interface logic compliant with JEIDA 4.2 and PC Card Standard Release 2.01, with built-in timing control, attribute/memory mode selection, and card detection signals. This capability is implemented in the bus state controller (BSC) and requires no external interface IC. The D6417709SHF200BV's PCMCIA support is detailed in Section 10.3.6 of the SH7709S Hardware Manual and enables direct attachment of Type I/II memory and I/O cards.