Renesas DA14583F01ATDB-P

Overview

DA14583F01ATDB-P from Dialog Semiconductor is a QFN40 daughterboard designed to interface with the DA14580 motherboard for full GPIO access and low-power Bluetooth Smart (BLE 4.2) application development using the DA14583 SoC. It supports SmartSnippets™ software profiling, on-board SEGGER JTAG debugging, and CR2032 battery-powered operation.

For engineers reviewing the DA14583F01ATDB-P datasheet, DA14583F01ATDB-P pinout, DA14583F01ATDB-P application, or DA14583F01ATDB-P equivalent, this daughterboard enables hardware validation, power consumption tuning, and firmware bring-up for BLE sensor nodes, wearable prototypes, and IoT edge devices requiring direct SoC signal visibility and debug control.

Technical Context

The DA14583F01ATDB-P is a hardware expansion module-not an IC or discrete component-that mounts onto the DA14580DEVKT-P starter motherboard. It provides physical breakout of all 40 pins of the DA14583 SoC in QFN40 package, including dedicated SWD/JTAG, UART, SPI, I²C, and GPIO interfaces.

It integrates on-board voltage regulation for 3.0 V operation, CR2032 coin-cell support with charging circuitry, and direct USB connectivity via the host motherboard. No standalone functionality exists: operation requires pairing with the DA14580 motherboard and SmartSnippets™ SDK.

Key Specifications

Availability

DA14583F01ATDB-P is available at Aetrix Electronics and suitable for Bluetooth Smart development, low-power IoT prototyping, and BLE firmware validation requiring stable component supply and traceable evaluation hardware sourcing.

Supply support for DA14583F01ATDB-P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Dialog Semiconductor is a fabless semiconductor company specializing in highly integrated mixed-signal ICs for power management, audio, and wireless connectivity.

The DA14583F01ATDB-P belongs to Dialog's SmartBond™ development tools product line, engineered to accelerate BLE application development with hardware-software co-verification, ultra-low-power measurement, and full SoC signal access.

FAQ

Is DA14583F01ATDB-P a standalone Bluetooth module or IC?

No. DA14583F01ATDB-P is a QFN40 daughterboard that must be used with the DA14580DEVKT-P motherboard. It does not contain RF certification, antenna, or autonomous operation capability. DA14583F01ATDB-P serves solely as a hardware interface to expose and route the DA14583 SoC's pins for development and debugging.

What is required to use DA14583F01ATDB-P?

To use DA14583F01ATDB-P, you need the DA14580DEVKT-P starter motherboard, a micro-USB cable, CR2032 battery (included), and Dialog's SmartSnippets™ Studio software. DA14583F01ATDB-P cannot operate independently-it relies entirely on the motherboard for power, USB communication, and debug infrastructure.

Does DA14583F01ATDB-P include an integrated antenna or RF matching network?

No. DA14583F01ATDB-P contains no antenna, RF front-end, or matching components. RF functionality depends entirely on the DA14580 motherboard, which hosts the PCB trace antenna and associated RF circuitry. DA14583F01ATDB-P is a passive interconnect board focused on GPIO and debug signal accessibility.

Can DA14583F01ATDB-P be used with other motherboards besides DA14580DEVKT-P?

No. DA14583F01ATDB-P is mechanically and electrically designed only for the DA14580DEVKT-P motherboard. Its board-to-board connector, pin mapping, and power sequencing are specific to that platform. Using DA14583F01ATDB-P with any other baseboard is unsupported and may cause functional or electrical incompatibility.

What software tools are compatible with DA14583F01ATDB-P?

DA14583F01ATDB-P is validated exclusively with Dialog's SmartSnippets™ Studio, the DA14583 SDK, and associated BLE stack libraries. These tools enable firmware flashing, real-time power profiling, register-level debugging, and BLE GATT service configuration-functions tightly coupled to the DA14583F01ATDB-P + DA14580DEVKT-P hardware combination.