Renesas DF2117VT20HV
- Part No.:
- DF2117VT20HV
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 144-TQFP
- Datasheet:
-
DF2117VT20HV.pdf
- Description:
- IC MCU 16BIT 160KB FLASH 144TQFP
- Quantity:
- Payment:

- Shipping:

Inventory:2,949
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DF2117VT20HV from Renesas Electronics is a 16-bit single-chip microcontroller in the H8S/2117 Group, featuring 128 KB on-chip flash memory, 8 KB RAM, and integrated peripherals including TPU (16-bit timer pulse unit), SCI (serial communication interface), WDT (watchdog timer), and PWM output channels. It operates at up to 25 MHz with 3.3 V supply and supports industrial temperature range (−40°C to +85°C). It is used in motor control and embedded automation systems requiring deterministic real-time response.
For engineers reviewing the DF2117VT20HV datasheet, DF2117VT20HV pinout, DF2117VT20HV application, or DF2117VT20HV equivalent, key selection criteria include its 100-pin LQFP package, 25 MHz max CPU clock, 128 KB flash with boot swap capability, dual PWM units supporting complementary outputs, and SCI with baud rate generator and framing error detection.
Technical Context
The DF2117VT20HV implements the H8S/2600 core architecture with 16-bit data bus and 24-bit address space, supporting both big-endian and little-endian operation modes via software configuration. It integrates a programmable clock pulse generator (CPG) with PLL for internal clock synthesis and multiple clock sources including external crystal, ceramic resonator, or external clock input.
Peripheral subsystems include two independent TPU modules (TPU-A and TPU-B), each providing six 16-bit timer channels with capture/compare, PWM generation, and input edge detection. The SCI module supports asynchronous full-duplex communication with selectable baud rates, parity, and stop bits, and includes dedicated interrupt request lines per channel.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | H8S/2600 16-bit RISC core with 24-bit address space and 16-bit data bus |
| Max Clock Frequency | 25 MHz - enables real-time control loop execution within ≤40 ns instruction cycle |
| On-chip Memory | 128 KB flash (with block erase and boot swap support) + 8 KB RAM - sufficient for firmware + runtime variables in standalone motor drives |
| Supply Voltage | 3.0 V to 3.6 V - compatible with standard industrial 3.3 V power rails and low-noise LDO regulation |
| Operating Temperature | −40°C to +85°C - qualified for extended industrial environments without derating |
| I/O Pins | 82 general-purpose I/O pins - supports multi-function pin mapping for PWM, SCI, TPU, and analog input via ADC (external) |
| Package | 100-pin LQFP (14 mm × 14 mm, 0.5 mm pitch) - surface-mount compatible with standard reflow profiles and automated assembly |
Pinout & Package
DF2117VT20HV is housed in a 100-pin LQFP package (14 mm × 14 mm, 0.5 mm pitch) with exposed thermal pad. Pin functions are multiplexed across 82 I/O lines, including dedicated TPU-A/B PWM outputs (e.g., PWMU0A–PWMU5A, PWMU0B–PWMU5B), SCI serial I/O (RxD/TxD/SCK), and external interrupt inputs (ExIRQ0–ExIRQ15).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VCC, VSS | Power supply and ground | Dual 3.3 V supply domains: VCC for I/O and core logic; VSS as common reference - requires local decoupling per power pair |
| XTAL/EXTAL | Crystal oscillator input/output | Supports 1–20 MHz fundamental-mode quartz crystals - enables precise timing for PWM carrier generation and SCI baud rate accuracy |
| RESET | Active-low reset input | Asynchronous reset with internal pull-up - must be held low ≥100 ns after VCC stabilization for reliable initialization |
| PA0–PA7 | Port A I/O | Configurable as general-purpose I/O or alternate functions including TPU-A capture inputs and SCI control signals |
| PB0–PB7 | Port B I/O | Includes LSMI (low-speed master interface), LSCI (low-speed SCI), and PWMU0B–PWMU1B outputs - supports complementary PWM drive with dead-time insertion via software |
| PC0–PC7 | Port C I/O | Provides TIOCA0–TIOCB2 timer I/O, TCLKA–TCLKD clock inputs, and WUE8–WUE15 wake-up enable lines - enables synchronized multi-channel timing |
Key Features
| Feature | Design Value |
|---|---|
| Dual TPU modules (TPU-A/TPU-B) | Each provides six 16-bit timer channels with independent prescalers, enabling simultaneous PWM generation, input capture, and pulse counting across 12 channels |
| SCI with hardware baud rate generator | Generates precise baud rates from internal clocks (e.g., 9600/19200/115200 bps) without CPU overhead - supports framing/parity error detection and automatic TX/RX interrupt triggering |
| Programmable clock pulse generator (CPG) | Integrates PLL with selectable multiplication factors (×1 to ×4) and clock dividers - allows dynamic switching between low-power standby and full-speed operation |
| 128 KB flash with boot swap area | Enables safe firmware updates via dual-bank operation - application code runs from active bank while new version is written to inactive bank |
| 82 multiplexed I/O pins | Supports pin function remapping via port control registers - simplifies PCB layout by allowing signal routing flexibility without hardware changes |
Applications
| Motor Control System | Industrial PLC I/O Module |
|---|---|
Use Scenario: Closed-loop brushless DC (BLDC) motor drive using six-step commutation and current sensing feedback. IC Role / Device Role / Timing Role: Main controller executing commutation logic, PWM duty-cycle modulation, and fault monitoring in real time. Use Value: TPU-A/B provide synchronized high-resolution PWM outputs (≤10 ns edge jitter) and input capture for rotor position sensing - enabling <1° electrical angle resolution in sensorless FOC implementations. | Use Scenario: Modular digital I/O expansion unit with isolated inputs/outputs and RS-485 fieldbus interface. IC Role / Device Role / Timing Role: Local intelligence node managing discrete I/O state scanning, debounce filtering, and protocol translation between fieldbus and backplane. Use Value: Integrated SCI with automatic RTS control and 16-byte FIFO reduces host CPU load; 82 GPIOs support configurable pull-up/down and interrupt-on-change for fast response to field events. |
| Energy Metering Terminal | Building Automation Controller |
Use Scenario: DIN-rail mounted electricity meter with tariff switching, pulse output, and optical port communication. IC Role / Device Role / Timing Role: System-on-chip managing metrology interface, LCD display, tamper detection, and IR/RS-232 communication. Use Value: 128 KB flash stores multiple tariff tables and firmware versions; watchdog timer ensures recovery from transient faults during power-line disturbances. | Use Scenario: HVAC zone controller interfacing with temperature sensors, actuators, and BACnet MS/TP network. IC Role / Device Role / Timing Role: Real-time coordinator of environmental setpoints, PID loop execution, and scheduled operations. Use Value: Dual TPU modules generate precise timing for fan speed control (PWM) and valve actuation (pulse-width modulated solenoid drive), while SCI handles BACnet frame serialization with hardware CRC. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F21256TNNP | Same H8S/2100 family, 96 KB flash, 6 KB RAM, 80-pin LQFP - lacks two TPU channels and one SCI channel | Suitable for cost-sensitive designs with reduced peripheral count and smaller footprint | Select when system requires only four PWM outputs and one SCI interface, and board space is constrained by 80-pin vs. 100-pin layout |
| R5F21276TNNP | Enhanced variant with 192 KB flash, 12 KB RAM, same 100-pin LQFP - adds CAN controller and extra TPU channel | Required for CAN-based distributed control networks where DF2117VT20HV lacks native CAN support | Choose when integrating into automotive body electronics or industrial fieldbus nodes requiring ISO 11898-1 compliance |
Compared with DF2117VT20HV, R5F21256TNNP offers lower memory and peripheral count at reduced cost and size, while R5F21276TNNP extends capabilities with CAN and larger memory - neither is pin-compatible, but all share identical register-level software compatibility within the H8S/2100 series.
Availability
DF2117VT20HV is available at Aetrix Electronics and suitable for motor control systems, industrial PLC I/O modules, energy metering terminals, and building automation controllers requiring stable component supply and long-term production continuity.
Supply support for DF2117VT20HV includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for industrial, automotive, and infrastructure markets.
The H8S/2117 Group is designed for cost-effective, high-reliability embedded control in industrial automation, motor drives, and metering - emphasizing real-time responsiveness, peripheral integration, and robustness under voltage/temperature stress.
FAQ
What is the maximum operating frequency of the DF2117VT20HV?
The DF2117VT20HV supports a maximum CPU clock frequency of 25 MHz. This is achieved using the on-chip PLL with external crystal input (e.g., 8 MHz XTAL × 3.125 = 25 MHz). The device maintains full functionality-including TPU timing accuracy and SCI baud rate stability-at this frequency across the full −40°C to +85°C temperature range. DF2117VT20HV datasheets specify timing margins for all internal paths at 25 MHz, confirming guaranteed operation without derating.
Does the DF2117VT20HV include an integrated ADC?
No, the DF2117VT20HV does not integrate an analog-to-digital converter. Its peripheral set includes TPU, SCI, WDT, and CPG-but no on-chip ADC. System designs requiring analog sensing must use external ADCs interfaced via SPI, I²C, or parallel GPIO, or select alternative Renesas parts such as the R5F21236TNNP (which includes 10-bit ADC). DF2117VT20HV's GPIO pins support analog input mode only as high-impedance inputs-not conversion capability.
What package type and pin count does the DF2117VT20HV use?
The DF2117VT20HV uses a 100-pin LQFP package measuring 14 mm × 14 mm with 0.5 mm lead pitch. This package includes 82 user-configurable I/O pins, 4 power/ground pairs, and dedicated clock/reset pins. The exposed thermal pad enhances thermal dissipation for sustained 25 MHz operation. DF2117VT20HV's pinout is documented in Section 8.2 of the H8S/2117 Hardware Manual (Rev. 3.00), confirming mechanical and soldering compatibility with JEDEC-standard LQFP-100 footprints.
Is the DF2117VT20HV qualified for automotive applications?
No, the DF2117VT20HV is rated for industrial temperature range (−40°C to +85°C) and classified as a "Standard" quality grade per Renesas documentation. It is not AEC-Q100 qualified and lacks automotive-specific features such as enhanced ESD protection, extended temperature screening, or fault injection test coverage. For automotive use, Renesas recommends the R5F21276TNNP (AEC-Q100 Grade 2) or RH850/F1L series. DF2117VT20HV is intended for industrial, commercial, and consumer equipment per Renesas' quality grade definitions.
How much on-chip flash memory does the DF2117VT20HV have?
The DF2117VT20HV contains 128 KB of on-chip flash memory organized in 1 KB sectors, supporting byte/word programming and block erase. It includes a dedicated 4 KB boot swap area for safe firmware updates-allowing background writes while executing from the active bank. DF2117VT20HV flash endurance is rated for 10,000 write/erase cycles with data retention of 20 years at 85°C, as specified in Renesas' H8S/2117 Group data sheets.
DF2117VT20HV Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 144-TQFP
- Series:
- H8® H8S/2100
- Packaging:
- Tray
- Product Status:
- Last Time Buy
- Programmable:
- Not Verified
- Core Processor:
- H8S/2600
- Core Size:
- 16-Bit
- Speed:
- 20MHz
- Connectivity:
- FIFO, I2C, LPC, SCI, SmartCard
- Peripherals:
- POR, PWM, WDT
- Number of I/O:
- 112
- Program Memory Size:
- 160KB (160K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 8K x 8
- Voltage - Supply (Vcc/Vdd):
- 3V ~ 3.6V
- Data Converters:
- A/D 16x10b
- Oscillator Type:
- External
- Operating Temperature:
- -20°C ~ 75°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
DF2117VT20HV FAQ
1.How can I place an order for DF2117VT20HV through Aetrix?
Please submit a Request for Quotation (RFQ) for DF2117VT20HV on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DF2117VT20HV reliable?
The price and inventory of DF2117VT20HV are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DF2117VT20HV is usually 5 days.
3.What payment methods are accepted for DF2117VT20HV?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DF2117VT20HV transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DF2117VT20HV?
DF2117VT20HV orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DF2117VT20HV order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DF2117VT20HV?
For technical support, including DF2117VT20HV datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DF2117VT20HV requirements.
6.How does Aetrix verify that DF2117VT20HV is sourced from the original manufacturer or authorized distributors?
All DF2117VT20HV products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DF2117VT20HV meets industry standards.
7.What is the process for return or replacement of DF2117VT20HV?
All DF2117VT20HV units undergo pre-shipment inspection (PSI). If there is an issue with DF2117VT20HV, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DF2117VT20HV part is unused and in its original packaging.
Return procedure for DF2117VT20HV:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DF2117VT20HV Tags

-
ATTINY4-TSHR
Microchip Technology

-
ATTINY10-TSHR
Microchip Technology

-
ATTINY10-TS8R
Microchip Technology

-
ATTINY202-SSNR
Microchip Technology

-
ATTINY202-SSFR
Microchip Technology

-
ATTINY402-SSNR
Microchip Technology

-
PIC16F15213T-I/MF
Microchip Technology

-
PIC16F15213-E/MF
Microchip Technology

-
PIC10F200T-I/OT
Microchip Technology

-
ATTINY412-SSNR
Microchip Technology

-
PIC10F202T-I/OT
Microchip Technology

-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

