My Inquiry
My Account
Analog Devices Inc./Maxim Integrated DG409EUE+T
- Part No.:
- DG409EUE+T
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-TSSOP (0.173", 4.40mm Width)
- Datasheet:
-
DG409EUE+T.pdf
- Description:
- IC SWITCH SP4TX2 100OHM 16TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:4,455
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG409EUE+T from Maxim Integrated is a dual 4-channel CMOS analog multiplexer/demultiplexer designed for precision signal routing in mixed-signal systems. It features guaranteed 100Ω max on-resistance, 8Ω max channel-to-channel matching, and 15pC max charge injection-enabling high-fidelity sampling in data-acquisition and test equipment.
For engineers reviewing the DG409EUE+T datasheet, DG409EUE+T pinout, DG409EUE+T application, or DG409EUE+T equivalent, key selection criteria include rail-to-rail analog signal handling (±20V dual / +30V single supply), TTL/CMOS-compatible digital control, and -40°C to +85°C industrial temperature operation with TSSOP-16 packaging.
Technical Context
The DG409EUE+T implements dual independent 4:1 analog switch arrays with integrated CMOS address decoding logic. Each channel supports bidirectional signal flow, ±20V dual-supply or +5V to +30V single-supply operation, and exhibits guaranteed on-resistance flatness of 9Ω max across the full analog signal range.
It delivers low dynamic error via 15pC max charge injection and 75ns typical enable turn-on time (tON(EN)), while maintaining <5nA input off-leakage at +85°C. ESD protection exceeds 2000V per MIL-STD-883 Method 3015.7.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Configuration | Dual 4-channel analog MUX/DEMUX - two independent 4:1 switch banks (S1A–S4A/DA and S1B–S4B/DB) |
| On-Resistance (rDS(ON)) | 100Ω max - ensures minimal signal attenuation and gain error in precision measurement paths |
| Channel Matching (ΔrDS(ON)) | 8Ω max - enables accurate differential signal routing and ratio-metric measurements |
| Charge Injection | 15pC max - limits voltage glitch and settling error in sample-and-hold circuits |
| Analog Signal Range | ±20V dual supply or +30V single supply - supports rail-to-rail input/output with V− grounded in single-supply mode |
| Supply Voltage Range | ±5V to ±20V dual or +5V to +30V single - accommodates industrial, test, and avionics power architectures |
| Leakage Current (IS(OFF)) | 5nA max at +85°C - preserves signal integrity in high-impedance sensor interfaces |
Pinout & Package
Package: 16-pin TSSOP (U16-1), 4.4mm × 5.0mm body, 0.65mm pitch, exposed pad not electrically connected.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 16 | A0, A1 | Binary address inputs selecting active channel per 4:1 bank (A0 LSB, A1 MSB) |
| 2 | EN | Active-high enable - disables all switches when low, reducing leakage and crosstalk |
| 3 | V− | Negative supply rail - required for dual-supply operation; tied to GND for single-supply use |
| 4–7 | S1A–S4A | Bidirectional analog inputs for first 4:1 switch bank |
| 8, 9 | DA, DB | Common analog outputs - DA for Bank A (S1A–S4A), DB for Bank B (S1B–S4B) |
| 10–13 | S4B–S1B | Bidirectional analog inputs for second 4:1 switch bank (pin order reversed per datasheet top view) |
| 14 | GND | Ground reference - decoupling capacitor placement critical for noise immunity |
| 15 | V+ | Positive supply rail - supplies internal logic and switch driver circuitry |
Key Features
| Feature | Design Value |
|---|---|
| PIN-COMPATIBLE UPGRADE | Direct drop-in replacement for legacy DG409 - no PCB or firmware changes required |
| GUARANTEED CHANNEL MATCHING | 8Ω max rDS(ON) mismatch - eliminates gain skew between parallel signal paths |
| LOW CHARGE INJECTION | 15pC max - reduces hold-mode voltage error in 12-bit+ SAR ADC front-ends |
| Rail-to-Rail Signal Handling | Supports signals from V− to V+ - enables full dynamic range utilization in ±15V instrumentation |
| TTL/CMOS-Compatible Control | VAL ≤ 0.8V / VAH ≥ 2.4V logic thresholds - interoperable with 3.3V and 5V microcontrollers |
Applications
| Test Equipment Signal Routing | Industrial Data-Acquisition Front-End |
|---|---|
Use Scenario: Automated test systems switching multiple sensor inputs to a shared high-resolution ADC. IC Role / Device Role / Timing Role: Dual 4:1 analog multiplexer enabling sequential sampling of 8 pressure, temperature, and current sensors. Use Value: 8Ω max channel matching ensures consistent gain across channels; 5nA max leakage at +85°C prevents drift in thermocouple cold-junction compensation. |
Use Scenario: Modular PLC I/O module aggregating analog inputs from field transmitters. IC Role / Device Role / Timing Role: Precision signal router interfacing 4–20mA and ±10V industrial sensors to isolated signal conditioning stages. Use Value: ±20V dual-supply support handles wide industrial voltage ranges; 15pC max charge injection minimizes step errors during channel scanning. |
| Audio Channel Selection | Guidance System Sensor Multiplexing |
Use Scenario: Professional audio mixer selecting between line-level instrument inputs. IC Role / Device Role / Timing Role: Low-distortion analog switch bank routing guitar, mic, and synth signals to a common preamp stage. Use Value: 100Ω max on-resistance and 9Ω max flatness preserve frequency response up to 20kHz; rail-to-rail operation avoids clipping on ±12V audio rails. |
Use Scenario: Avionics subsystem consolidating inertial measurement unit (IMU), GPS, and air-data sensor outputs. IC Role / Device Role / Timing Role: Radiation-tolerant-capable analog MUX routing redundant sensor data to flight control processors. Use Value: -40°C to +85°C operation meets DO-160 environmental requirements; >2000V ESD protection guards against static discharge in dry cabin environments. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog multiplexer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADG409BRUZ | 100Ω typical on-resistance (not guaranteed max); 25pC typical charge injection; operates up to +85°C but only in SOIC-16 package | Lacks guaranteed 8Ω channel matching and 15pC max charge injection specs - less suitable for metrology-grade sampling | Select DG409EUE+T when guaranteed matching and low-charge-injection performance are required for precision acquisition. |
| TS5A23159DRCR | Single-supply only (+1.65V to +5.5V); 0.9Ω typical on-resistance; 12pC typical charge injection; 10-pin WSON package | Not compatible with ±15V or +24V industrial supplies; insufficient voltage range for test equipment or avionics | Choose DG409EUE+T for bipolar/high-voltage analog routing; TS5A23159 suits low-voltage portable instrumentation only. |
Compared with ADG409BRUZ and TS5A23159DRCR, DG409EUE+T uniquely guarantees both 8Ω channel matching and 15pC max charge injection across its full -40°C to +85°C range while supporting ±20V dual supplies - making it the only option qualified for high-accuracy, wide-range industrial and aerospace signal routing.
Availability
DG409EUE+T is available at Aetrix Electronics and suitable for test equipment, industrial data-acquisition systems, and guidance and control systems requiring stable component supply across extended temperature and voltage ranges.
Supply support for DG409EUE+T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs high-performance analog and mixed-signal ICs for industrial, communications, and computing applications.
The DG409EUE+T belongs to Maxim's precision analog multiplexer product line, engineered specifically for low-error signal routing in data-acquisition, test instrumentation, and rugged embedded control systems.
FAQ
What is the maximum supply voltage rating for DG409EUE+T?
The DG409EUE+T supports dual supplies from ±5V to ±20V and single supplies from +5V to +30V. Absolute maximum ratings specify V+ to V− ≤ 44V and V+ referenced to V− must not exceed -0.3V to +44V. Operation beyond these limits risks permanent damage.
Does DG409EUE+T support rail-to-rail analog signal switching?
Yes, DG409EUE+T supports rail-to-rail analog signal handling - signals can swing from V− to V+ without distortion or clipping. When used with a single +12V supply, V− is connected to GND, allowing 0V to +12V signal routing.
Is DG409EUE+T pin-compatible with the original DG409?
Yes, DG409EUE+T is a pin-compatible plug-in upgrade for the industry-standard DG409. It uses identical TSSOP-16 pinout, logic interface levels, and functional behavior - enabling direct replacement without layout or firmware changes.
What is the guaranteed on-resistance flatness specification for DG409EUE+T?
DG409EUE+T guarantees on-resistance flatness of 9Ω maximum across the specified analog signal range. This parameter defines the difference between maximum and minimum rDS(ON) values measured at signal extremes (e.g., ±10V), ensuring consistent gain regardless of input voltage level.
How does DG409EUE+T perform at elevated temperature?
At +85°C, DG409EUE+T maintains ≤5nA input off-leakage current and ≤100Ω on-resistance. On-resistance increases predictably with temperature - typical rDS(ON) rises from ~60Ω at +25°C to ~95Ω at +85°C under ±15V dual supply, remaining within guaranteed limits.
DG409EUE+T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Circuit:
- SP4T
- Multiplexer/Demultiplexer Circuit:
- 4:1
- Number of Circuits:
- 2
- On-State Resistance (Max):
- 100Ohm
- Channel-to-Channel Matching (ΔRon):
- 1.5Ohm
- Voltage - Supply, Single (V+):
- 5V ~ 30V
- Voltage - Supply, Dual (V±):
- ±5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 150ns, 150ns
- -3db Bandwidth:
- -
- Charge Injection:
- 2pC
- Channel Capacitance (CS(off), CD(off)):
- 3pF, 14pF
- Current - Leakage (IS(off)) (Max):
- 500pA
- Crosstalk:
- -92dB @ 100kHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-TSSOP
DG409EUE+T FAQ
1.How can I place an order for DG409EUE+T through Aetrix?
Please submit a Request for Quotation (RFQ) for DG409EUE+T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG409EUE+T reliable?
The price and inventory of DG409EUE+T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG409EUE+T is usually 5 days.
3.What payment methods are accepted for DG409EUE+T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG409EUE+T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG409EUE+T?
DG409EUE+T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG409EUE+T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG409EUE+T?
For technical support, including DG409EUE+T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG409EUE+T requirements.
6.How does Aetrix verify that DG409EUE+T is sourced from the original manufacturer or authorized distributors?
All DG409EUE+T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG409EUE+T meets industry standards.
7.What is the process for return or replacement of DG409EUE+T?
All DG409EUE+T units undergo pre-shipment inspection (PSI). If there is an issue with DG409EUE+T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG409EUE+T part is unused and in its original packaging.
Return procedure for DG409EUE+T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG409EUE+T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
