My Inquiry
My Account
Renesas DG412DY-T
- Part No.:
- DG412DY-T
- Manufacturer:
- Renesas
- Package:
- 16-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
DG412DY-T.pdf
- Description:
- IC SWITCH SPST-NOX4 35OHM 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:3,315
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG412DY-T from Renesas Electronics is a monolithic quad SPST CMOS analog switch with TTL/CMOS-compatible digital inputs, 35 Ω max ON-resistance, 175 ns max tON, and ±20 V dual-supply or 5–44 V single-supply operation. It serves as a drop-in replacement for DG212 in precision signal routing applications such as data acquisition front-ends and sample-and-hold circuits.
For engineers reviewing the DG412DY-T datasheet, DG412DY-T pinout, DG412DY-T application, or DG412DY-T equivalent, this page delivers verified electrical specs, SOIC-16 package details, logic polarity confirmation (active-HIGH control), leakage performance (±0.25 nA at 25°C), and real-world switching behavior under ±15 V analog signal swing.
Technical Context
The DG412DY-T implements four independent bilateral SPST switches using a high-voltage silicon-gate CMOS process with epitaxial isolation to prevent latch-up. Its logic polarity-where INx = HIGH turns the switch OFF and INx = LOW turns it ON-is fixed per DG412 family specification and differs from DG411 (active-LOW).
It supports rail-to-rail analog signal handling up to ±15 V with low charge injection (5 pC typ) and maintains <45 Ω rDS(ON) across full temperature range (−40°C to +85°C). The VL pin enables TTL-level compatibility while operating from ±5 V to ±20 V supplies or +5 V to +44 V single supply.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| ON-resistance (max) | 35 Ω at 25°C - ensures minimal signal attenuation and gain error in precision amplifier multiplexing |
| Turn-on time (max) | 175 ns at 25°C - enables sub-microsecond channel switching in high-speed data acquisition |
| Analog signal range | ±15 V - supports full-rail AC-coupled audio and industrial sensor signals without clipping |
| Charge injection (typ) | 5 pC - reduces pedestal error in sample-and-hold stages, easing hold capacitor sizing |
| OFF isolation (typ) | 68 dB at 1 MHz - suppresses crosstalk between adjacent channels in multi-channel instrumentation |
| Supply voltage range | ±5 V to ±20 V or +5 V to +44 V - accommodates legacy bipolar rails and modern wide-range unipolar systems |
| Logic compatibility | TTL/CMOS - interfaces directly with microcontrollers, FPGAs, and legacy logic without level-shifting |
Pinout & Package
DG412DY-T is housed in a 16-lead SOIC (150 mil) package per JEDEC MS-012-AC, with 1.27 mm lead pitch, 10.0 mm × 4.0 mm body, and RoHS-compliant matte tin terminations.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | IN1–IN4 | Digital control inputs; logic HIGH = switch OFF (DG412-specific active-HIGH polarity) |
| 2, 15, 10, 7 | D1–D4 | Drain (output) terminals; bidirectional current path when switch is ON |
| 3, 14, 11, 6 | S1–S4 | Source (input) terminals; symmetric with drains for AC/bidirectional signal routing |
| 4 | V− | Negative power supply rail; must be connected for dual-supply operation or grounded for single-supply |
| 5 | GND | Logic ground reference; separate from power grounds to minimize noise coupling into control logic |
| 12 | VL | Logic reference voltage; tied to 5 V for TTL compatibility regardless of analog supply rails |
| 13 | V+ | Positive power supply rail (also substrate connection); defines upper analog voltage limit |
Key Features
| Feature | Design Value |
|---|---|
| Drop-in DG212 replacement | Identical pinout and function to DG212, enabling direct upgrade without PCB redesign |
| Bilateral switching | Equal ON-resistance and capacitance in both directions - preserves signal integrity for AC-coupled audio paths |
| Low charge injection | 5 pC typical - minimizes voltage step errors during sampling, critical for 12-bit+ ADC front-ends |
| Latch-up immunity | Epitaxial layer isolation - eliminates risk of destructive latch-up under transient overvoltage conditions |
| Pb-free + anneal construction | RoHS-compliant with 100% matte tin finish - qualified for both SnPb and Pb-free reflow profiles |
Applications
| Audio Switching | Data Acquisition |
|---|---|
Use Scenario: Routing line-level stereo signals between multiple input sources (mic, instrument, playback) in professional audio mixers. IC Role / Device Role / Timing Role: Quad SPST analog switch providing isolated channel selection with <68 dB OFF isolation to prevent bleed between inputs. Use Value: 35 Ω ON-resistance and ±15 V signal handling preserve dynamic range and THD+N performance across full audio bandwidth. |
Use Scenario: Multiplexing 16-channel sensor outputs (thermocouples, strain gauges) into a single high-resolution ADC. IC Role / Device Role / Timing Role: Precision analog switch enabling sequential sampling with low charge injection (5 pC) to avoid hold capacitor settling errors. Use Value: 175 ns tON allows >5 kSPS per channel without dead-time penalties; ±15 V range accommodates industrial sensor excitation voltages. |
| Sample and Hold Circuits | Automatic Test Equipment |
Use Scenario: Fast-settling sample-and-hold stage preceding a 16-bit SAR ADC in metrology-grade equipment. IC Role / Device Role / Timing Role: Low-charge-injection switch controlling hold capacitor charging phase with precise timing control. Use Value: 5 pC typical charge injection limits pedestal error to <1 LSB at 16-bit resolution with 10 nF hold capacitor. |
Use Scenario: Signal path configuration in modular ATE systems requiring rapid reconfiguration of DUT stimulus/response channels. IC Role / Device Role / Timing Role: Quad SPST switch enabling flexible routing of test signals (DC bias, AC stimulus, measurement returns) under microcontroller control. Use Value: 35 Ω ON-resistance ensures minimal loading on precision current sources; 145 ns tOFF enables <10 µs channel reconfiguration cycles. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar quad SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4612ESE+ | Higher ON-resistance (45 Ω max), slower tON (250 ns max), same SOIC-16 package | Less suitable for high-speed DAQ; acceptable for audio where bandwidth <100 kHz | Select MAX4612ESE+ only if lower cost outweighs 75 ns speed penalty and 10 Ω resistance increase |
| ADG412BRZ | Active-LOW logic (DG411-style), identical rDS(ON) and switching specs, same SOIC-16 footprint | Requires inverted control signals; unsuitable where existing firmware assumes DG412 polarity | Choose ADG412BRZ only when logic inversion can be implemented in FPGA/microcontroller firmware |
Compared with MAX4612ESE+ and ADG412BRZ, DG412DY-T offers the fastest switching (175 ns tON), lowest ON-resistance (35 Ω), and native DG212-compatible logic polarity-making it optimal for drop-in upgrades and time-critical signal routing where control timing and analog fidelity are co-constrained.
Availability
DG412DY-T is available at Aetrix Electronics and suitable for data acquisition systems, automated test equipment, and precision sample-and-hold circuits requiring stable component supply across extended product lifecycles.
Supply support for DG412DY-T includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader delivering high-performance, reliable analog and mixed-signal solutions for industrial, automotive, and infrastructure markets.
The DG412DY-T belongs to Renesas' legacy high-voltage analog switch portfolio, engineered specifically for precision signal routing in environments demanding rail-to-rail analog swing, low distortion, and long-term reliability under thermal stress.
FAQ
What is the logic polarity of DG412DY-T?
The DG412DY-T uses active-HIGH logic control: a logic HIGH (≥2.4 V) at INx turns the corresponding switch OFF, and a logic LOW (≤0.8 V) turns it ON. This polarity matches the DG212 family and differs from DG411 (active-LOW). Confirmed by truth table on page 2 of FN3282 Rev 13.00. DG412DY-T must be driven with inverted control signals relative to DG411-based designs.
Does DG412DY-T support single-supply operation?
Yes, DG412DY-T operates from a single +5 V to +44 V supply. Pin 4 (V−) must be connected to ground, Pin 13 (V+) to the positive rail, and Pin 12 (VL) to +5 V for TTL compatibility. Analog signal range is 0 V to V+ − 2 V (e.g., 0–10 V at +12 V supply), per Electrical Specifications on page 4 of FN3282.
What is the maximum analog signal voltage DG412DY-T can handle?
DG412DY-T supports analog signals from V− to V+, with a maximum differential supply rating of 44 V. In dual-supply mode (e.g., ±15 V), the analog input range is ±15 V. In single-supply mode (+12 V), the range is 0–10 V. Absolute maximum ratings specify V+ to V− ≤ 44 V and analog pins within (V− − 2 V) to (V+ + 2 V), per page 4 of FN3282.
Is DG412DY-T pin-compatible with DG212?
Yes, DG412DY-T is a drop-in replacement for DG212 with identical pinout, electrical behavior, and logic polarity. The datasheet states "DG411 series… are drop-in replacements for the popular DG211 and DG212 series devices" and confirms matching pin assignments and truth tables. DG412DY-T retains the same SOIC-16 footprint (M16.15) as DG212.
What is the thermal resistance (θJA) of DG412DY-T in SOIC package?
The junction-to-ambient thermal resistance (θJA) for DG412DY-T in 16-lead SOIC package is 110°C/W, measured under standard JEDEC test conditions (low effective thermal conductivity board, free air). This value is specified in the Thermal Information table on page 4 of FN3282 Rev 13.00 and applies to the DG412DY variant.
DG412DY-T Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 35Ohm
- Channel-to-Channel Matching (ΔRon):
- -
- Voltage - Supply, Single (V+):
- 5V ~ 44V
- Voltage - Supply, Dual (V±):
- ±5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 175ns, 145ns
- -3db Bandwidth:
- -
- Charge Injection:
- 5pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -85dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
DG412DY-T FAQ
1.How can I place an order for DG412DY-T through Aetrix?
Please submit a Request for Quotation (RFQ) for DG412DY-T on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG412DY-T reliable?
The price and inventory of DG412DY-T are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG412DY-T is usually 5 days.
3.What payment methods are accepted for DG412DY-T?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG412DY-T transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG412DY-T?
DG412DY-T orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG412DY-T order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG412DY-T?
For technical support, including DG412DY-T datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG412DY-T requirements.
6.How does Aetrix verify that DG412DY-T is sourced from the original manufacturer or authorized distributors?
All DG412DY-T products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG412DY-T meets industry standards.
7.What is the process for return or replacement of DG412DY-T?
All DG412DY-T units undergo pre-shipment inspection (PSI). If there is an issue with DG412DY-T, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG412DY-T part is unused and in its original packaging.
Return procedure for DG412DY-T:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG412DY-T Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
