My Inquiry
My Account
Analog Devices Inc./Maxim Integrated DG413EGE
- Part No.:
- DG413EGE
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Package:
- 16-VQFN Exposed Pad
- Datasheet:
-
DG413EGE.pdf
- Description:
- IC SW SPST-NO/NCX4 45OHM 16QFN
- Quantity:
- Payment:
- Shipping:
Inventory:2,378
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG413EGE from Maxim Integrated is a quad SPST analog switch with two normally closed (NC) and two normally open (NO) channels, designed for precision signal routing in bipolar or single-supply systems. It delivers 35Ω max on-resistance, <5nA off-leakage at +85°C, 10pC max charge injection, and operates from ±4.5V to ±20V or +10V to +30V supplies-enabling use in battery-operated test equipment and military radio front-ends.
For engineers reviewing the DG413EGE datasheet, DG413EGE pinout, DG413EGE application, or DG413EGE equivalent, key selection criteria include guaranteed RDS(ON) matching (≤3Ω), rail-to-rail analog signal handling (±15.5V), break-before-make timing (25ns), and QFN-EP package thermal performance for high-density PCB layouts.
Technical Context
The DG413EGE implements four independent CMOS transmission gates with TTL/CMOS-compatible logic inputs (VL = 5V or V+). Its silicon-gate 44V process enables robust ±20V bipolar operation while maintaining low dynamic power (35µW max) and sub-100ns turn-off time.
Channel isolation is ensured by guaranteed off-isolation ≥68dB and crosstalk ≤85dB at 1MHz; on-resistance flatness (Δ4Ω max) and matching (3Ω max) are specified only under bipolar supply conditions per datasheet Note 4.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| RDS(ON) | 45Ω max - ensures minimal signal attenuation in audio and DC-coupled sensor paths |
| RDS(ON) Match | 3Ω max - enables matched gain/phase response across dual-channel instrumentation paths |
| Charge Injection | 10pC max - limits voltage glitch in sample-and-hold circuits using 1nF hold capacitors |
| Off-Leakage Current | <5nA at +85°C - preserves accuracy in high-impedance sensor multiplexing |
| tOFF | 100ns max - supports >5MHz switching in automated test equipment scan paths |
| Analog Signal Range | ±15.5V - allows full-rail signal handling with ±16.5V supplies without clipping |
| ESD Tolerance | 2000V min (HBM) - meets MIL-STD-883 Class 3015.7 for ruggedized field-deployed systems |
Pinout & Package
DG413EGE uses a 16-pin QFN-EP (exposed paddle) package with 3.5mm × 3.5mm footprint and 0.5mm pitch. The exposed paddle must be soldered to V+ for optimal thermal dissipation and ESD performance.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 | Digital control input | TTL/CMOS-compatible logic signals enabling NC/NO switching per channel pair |
| D1–D4 | Analog drain terminal | High-impedance side of each SPST switch; connects to signal source or load |
| S1–S4 | Analog source terminal | Low-impedance side tied to common reference; bidirectional conduction supported |
| V+, V- | Power rails | Bipolar supply pins enabling rail-to-rail analog swing; V+ also ties to substrate |
| GND | Ground reference | Logic and analog ground return; separate from power supply references |
| VL | Logic supply | 5V reference for input threshold setting; connect to V+ for CMOS-level compatibility |
| EP | Exposed paddle | Thermal and electrical connection to V+; mandatory for rated power dissipation and ESD robustness |
Key Features
| Feature | Design Value |
|---|---|
| Break-before-make timing | 25ns - prevents momentary shorting between NC/NO paths during DG413EGE channel switching |
| Rail-to-rail signal handling | ±15.5V analog range - eliminates level-shifting in ±12V industrial control I/O modules |
| Low power consumption | 35µW max - extends battery life in portable PBX maintenance tools and handheld test gear |
| Guaranteed RFLAT(ON) | Δ4Ω max over full signal range - maintains consistent gain in audio routing applications |
| Improved off-leakage | <5nA at +85°C - reduces drift in high-precision thermocouple multiplexers |
Applications
| Sample-and-Hold Circuits | Communication Systems |
|---|---|
Use Scenario: Capturing fast transient waveforms in radar receiver front-ends with minimal aperture error. IC Role / Device Role / Timing Role: DG413EGE acts as the precision sampling gate, controlling analog signal acquisition timing with 25ns break-before-make delay. Use Value: 10pC max charge injection ensures <1mV hold-step error into 1nF capacitors at 10MHz sampling rates. | Use Scenario: Routing RF IF signals between up/down-conversion stages in military radios. IC Role / Device Role / Timing Role: DG413EGE serves as a low-distortion signal path selector, leveraging its 45Ω RDS(ON) and 85dB crosstalk rejection. Use Value: ±15.5V analog range supports 0–12V IF signal levels without clipping or level-shifting circuitry. |
| Test Equipment | Battery-Operated Systems |
Use Scenario: Multiplexing sensor inputs in automated benchtop DMMs requiring nanovolt-level accuracy. IC Role / Device Role / Timing Role: DG413EGE functions as a low-leakage analog switch matrix, isolating high-Z inputs during measurement cycles. Use Value: <5nA off-leakage at +85°C prevents >100mV offset drift in 10MΩ input impedance paths over temperature. | Use Scenario: Power management sequencing in portable medical monitors with dual-voltage sensors. IC Role / Device Role / Timing Role: DG413EGE enables selective activation of analog front-end subsystems using single +12V battery supply. Use Value: 35µW max power draw minimizes quiescent current in always-on diagnostic monitoring modes. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ADG1413BRUZ | Lower RDS(ON) (1.3Ω typ), but requires ±15V only; no single-supply support | Better for low-distortion audio; unsuitable for +24V-only industrial sensors | Select ADG1413BRUZ when ultra-low on-resistance is critical and bipolar supply is available |
| TS5A3159DCKR | Single-supply only (+1.65V to +5.5V); 0.9Ω RDS(ON); smaller SC70-6 package | Targeted at low-voltage portable electronics; lacks ±20V capability | Choose TS5A3159DCKR for space-constrained, battery-powered consumer devices below 5.5V |
Compared with ADG1413BRUZ and TS5A3159DCKR, the DG413EGE uniquely supports both wide-range bipolar (±4.5V to ±20V) and single-supply (+10V to +30V) operation while delivering guaranteed RDS(ON) matching and low leakage across temperature-making it the only option for ruggedized, multi-rail test and defense systems requiring long-term stability.
Availability
DG413EGE is available at Aetrix Electronics and suitable for test equipment, military radios, and battery-operated systems requiring stable component supply across extended temperature ranges (-40°C to +85°C).
Supply support for DG413EGE includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (now part of Analog Devices) designs high-performance analog and mixed-signal ICs for industrial, communications, and automotive markets.
The DG413EGE belongs to Maxim's legacy precision analog switch family, engineered for signal integrity in demanding instrumentation, defense, and telecom infrastructure where leakage, matching, and voltage range are critical.
FAQ
What is the maximum analog signal voltage range supported by DG413EGE?
The DG413EGE supports an analog signal range of ±15.5V when operated with ±16.5V supplies. This rail-to-rail capability is confirmed in the Electrical Characteristics table under "Analog Signal Range" with V+ = 16.5V and V− = −16.5V. Operation outside this range risks exceeding absolute maximum ratings and may cause permanent damage to the DG413EGE device.
Does DG413EGE require external blocking diodes for overvoltage protection?
No-external blocking diodes are optional and only recommended if strict power-supply sequencing cannot be guaranteed. The DG413EGE includes internal clamping diodes (per Absolute Maximum Ratings Note 1), but adding external series diodes reduces the analog signal range by 1V. For most applications with controlled sequencing (V+ first, then VL/V−), the DG413EGE operates safely without added components.
How does the exposed paddle (EP) on DG413EGE affect thermal performance?
The exposed paddle on the DG413EGE QFN package must be soldered directly to a V+ copper plane to achieve rated thermal dissipation. Per Package Information document 21-0091, this connection lowers junction-to-board thermal resistance by >40% versus floating EP, preventing thermal runaway during sustained 30mA channel currents. Failure to connect EP to V+ voids the DG413EGE's specified power dissipation limits.
Can DG413EGE operate with unbalanced supplies like +24V and −5V?
Yes-the DG413EGE explicitly supports unbalanced supplies per Applications Information section. With +24V on V+ and −5V on V−, the device maintains full functionality as long as the total voltage difference (29V) remains within the 44V absolute maximum rating. However, analog signal range becomes asymmetric: limited to −5V to +23V due to internal clamp diode thresholds, a key constraint when designing with DG413EGE in mixed-rail systems.
Is DG413EGE pin-compatible with older DG413 variants in QFN packages?
Yes-the DG413EGE shares identical pinout, footprint, and function with other DG413 QFN variants (e.g., DG413EUE), as confirmed in the Pin Configurations section and Package Code G1655-3. All DG413 QFN versions use the same 16-pin layout with IN1–IN4, D1–D4, S1–S4, V+, V−, GND, VL, and EP terminals in identical positions, enabling direct replacement without PCB modification.
DG413EGE Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Switch Circuit:
- SPST - NO/NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 45Ohm
- Channel-to-Channel Matching (ΔRon):
- 3Ohm (Max)
- Voltage - Supply, Single (V+):
- 10V ~ 30V
- Voltage - Supply, Dual (V±):
- ±4.5V ~ 20V
- Switch Time (Ton, Toff) (Max):
- 175ns, 145ns
- -3db Bandwidth:
- -
- Charge Injection:
- 5pC
- Channel Capacitance (CS(off), CD(off)):
- 9pF, 9pF
- Current - Leakage (IS(off)) (Max):
- 250pA
- Crosstalk:
- -85dB @ 1MHz
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-QFN (5x5)
DG413EGE FAQ
1.How can I place an order for DG413EGE through Aetrix?
Please submit a Request for Quotation (RFQ) for DG413EGE on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG413EGE reliable?
The price and inventory of DG413EGE are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG413EGE is usually 5 days.
3.What payment methods are accepted for DG413EGE?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG413EGE transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG413EGE?
DG413EGE orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG413EGE order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG413EGE?
For technical support, including DG413EGE datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG413EGE requirements.
6.How does Aetrix verify that DG413EGE is sourced from the original manufacturer or authorized distributors?
All DG413EGE products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG413EGE meets industry standards.
7.What is the process for return or replacement of DG413EGE?
All DG413EGE units undergo pre-shipment inspection (PSI). If there is an issue with DG413EGE, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG413EGE part is unused and in its original packaging.
Return procedure for DG413EGE:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG413EGE Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
