My Inquiry
My Account
Vishay Siliconix DG613AEN-T1-E4
- Part No.:
- DG613AEN-T1-E4
- Manufacturer:
- Vishay Siliconix
- Package:
- 16-WFQFN
- Datasheet:
-
DG613AEN-T1-E4.pdf
- Description:
- IC SWITCH SPST 115OHM 16MINIQFN
- Quantity:
- Payment:
- Shipping:
Inventory:3,444
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DG613AEN-T1-E4 from Vishay Siliconix is a quad SPST analog switch IC with mixed configuration (2 normally open, 2 normally closed), designed for precision signal routing in high-speed and low-distortion applications. It delivers 1 pC typical charge injection, 2 pF source-off capacitance, 720 MHz 3 dB bandwidth, and operates from ±2.7 V to ±5 V dual supplies or +2.7 V to +12 V single supply - ideal for automated test equipment and medical instrumentation.
For engineers reviewing the DG613AEN-T1-E4 datasheet, DG613AEN-T1-E4 pinout, DG613AEN-T1-E4 application, or DG613AEN-T1-E4 equivalent, key selection criteria include break-before-make timing (15 ns at ±5 V), rail-to-rail analog signal handling, -40 °C to +125 °C operating range, and compatibility with 1.4 V logic thresholds at +3 V supply.
Technical Context
The DG613AEN-T1-E4 implements four independent CMOS transmission gates with complementary control logic per switch pair, enabling simultaneous ON/OFF states across its two NO and two NC channels. Its architecture supports bidirectional analog conduction, low RDS(on) flatness (40 Ω max), and guaranteed 2 V logic-high input threshold under ±5 V operation.
Designed for high-fidelity signal integrity, it features 90 dB crosstalk suppression and 62 dB off-isolation at 10 MHz, with dynamic performance validated across temperature extremes (-40 °C to +125 °C) and supply variants (±5 V, +5 V, +3 V).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Analog Signal Range | Rail-to-rail: -5 V to +5 V (dual supply); 0 V to +5 V (single +5 V); 0 V to +3 V (single +3 V) |
| On-Resistance (RON) | ≤115 Ω max at ±5 V - ensures minimal signal attenuation and voltage drop in precision measurement paths |
| Charge Injection | 1 pC typ. - critical for low-error sample-and-hold and data acquisition accuracy |
| 3 dB Bandwidth | 720 MHz - supports high-speed communication and wideband instrumentation signals |
| Leakage Current | <0.25 nA at 85 °C - preserves signal integrity in high-impedance sensor interfaces |
| Switching Time (tON/tOFF) | 27 ns / 16 ns at ±5 V - enables fast multiplexing in ATE and real-time signal routing |
| Break-Before-Make Delay | 15 ns at ±5 V - prevents momentary short-circuit during channel switching in mixed NO/NC configuration |
Pinout & Package
Package: 16-pin miniQFN (1.8 mm × 2.6 mm, 0.4 mm pitch), RoHS-compliant, halogen-free, with exposed thermal pad. Pin 1 marked by top-side identifier "Pxx".
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1–IN4 | Digital control inputs | CMOS/TTL-compatible logic inputs; 1.4 V min high-level threshold at +3 V supply |
| S1–S4 | Switch source terminals | Analog inputs/outputs; bidirectional, rail-to-rail capable |
| D1–D4 | Switch drain terminals | Analog inputs/outputs; matched to Sx for symmetric signal routing |
| V+ | Positive supply rail | Supports +2.7 V to +12 V single or +5 V dual supply |
| V− | Negative supply rail | Supports −2.7 V to −5 V in dual-supply mode |
| GND | Ground reference | Logic and analog ground return; tied to substrate in miniQFN |
| NC | No-connect terminal | Internally unconnected; must be left floating or grounded per layout guidelines |
Key Features
| Feature | Design Value |
|---|---|
| Mixed NO/NC configuration | Two normally open and two normally closed switches enable fail-safe signal routing and redundancy in safety-critical paths |
| Ultra-low charge injection | 1 pC typ. minimizes voltage glitch on sampled nodes - essential for 16-bit+ data acquisition systems |
| High off-isolation & low crosstalk | 62 dB isolation and 90 dB crosstalk at 10 MHz prevent signal coupling between adjacent channels |
| Wide temperature specification | Guaranteed operation from −40 °C to +125 °C supports automotive under-hood and industrial control environments |
| Low RDS(on) flatness | 40 Ω max variation over full analog range ensures consistent gain and linearity in amplifier/mux feedback paths |
Applications
| Automated Test Equipment (ATE) | Medical Instrumentation |
|---|---|
Use Scenario: High-speed signal routing between DUT and precision ADC/DAC in modular ATE racks. IC Role / Device Role / Timing Role: Quad SPST switch providing isolated channel selection with sub-30 ns switching and <1 pC charge injection. Use Value: Enables accurate multi-channel sampling without hold-step error or inter-channel interference. | Use Scenario: Multiplexing ECG, EEG, or pressure sensor inputs into a shared front-end amplifier chain. IC Role / Device Role / Timing Role: Low-leakage, rail-to-rail analog switch isolating patient-connected sensors from processing circuitry. Use Value: Maintains signal fidelity and meets IEC 60601 leakage limits (<0.25 nA at 85 °C). |
| Precision Data Acquisition | Sample-and-Hold Systems |
Use Scenario: Channel selection in 24-bit sigma-delta data loggers measuring thermocouples and RTDs. IC Role / Device Role / Timing Role: Low-RON, low-flatness switch minimizing gain error and offset drift across temperature. Use Value: Preserves ENOB and THD (<0.01 %) over full industrial temperature range. | Use Scenario: Acquiring and holding analog waveforms prior to digitization in oscilloscope or spectrum analyzer front ends. IC Role / Device Role / Timing Role: Charge-injection-optimized switch controlling hold capacitor connection with precise timing control. Use Value: Limits aperture uncertainty and droop-induced error via 1 pC injection and 720 MHz bandwidth. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MAX4613ESE+ | Quad SPST, 2 NO/2 NC; 1.5 pC charge injection; 500 MHz bandwidth; SOIC-16 only | Lower bandwidth and higher charge injection limit suitability for <1 MSPS DAQ, not RF or high-speed ATE | Select when SOIC-16 footprint required and 720 MHz bandwidth is unnecessary |
| ADG1414BRUZ | Quad SPST, all NO; 1.5 pC charge injection; 190 Ω RON; TSSOP-16; ±15 V rating | Higher RON, no NC channels; suited for high-voltage industrial I/O, not mixed-safety routing | Select when ±15 V operation is needed and NC functionality is not required |
Compared with MAX4613ESE+ and ADG1414BRUZ, the DG613AEN-T1-E4 offers superior bandwidth and lower charge injection in a space-saving miniQFN package, making it optimal for compact, high-fidelity signal routing where mixed NO/NC topology and thermal robustness are critical.
Availability
DG613AEN-T1-E4 is available at Aetrix Electronics and suitable for automated test equipment, medical instrumentation, and precision data acquisition requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for DG613AEN-T1-E4 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay Siliconix is a global leader in discrete semiconductors and passive components, specializing in high-performance analog switches, MOSFETs, and precision resistors.
The DG613AEN-T1-E4 belongs to the DG61xA family of ultra-low-charge-injection analog switches, engineered for signal integrity in high-speed test, medical, and instrumentation systems demanding rail-to-rail operation and extended temperature reliability.
FAQ
What is the maximum supply voltage rating for DG613AEN-T1-E4?
The DG613AEN-T1-E4 has an absolute maximum V+ to V− rating of 14 V. It operates fully specified at ±2.7 V to ±5 V dual supplies and +2.7 V to +12 V single supplies. Exceeding ±5 V or +12 V risks permanent damage per Absolute Maximum Ratings table in Document 69904.
Does DG613AEN-T1-E4 support rail-to-rail analog signal switching?
Yes, DG613AEN-T1-E4 supports true rail-to-rail analog signal handling: analog range spans −5 V to +5 V under ±5 V dual supply, and 0 V to +5 V or 0 V to +3 V under unipolar supplies. This is confirmed in the "Analog Signal Range" specifications on pages 4–6 of the DG611A/DG612A/DG613A datasheet.
What is the logic configuration of the four switches in DG613AEN-T1-E4?
DG613AEN-T1-E4 contains two normally open (NO) and two normally closed (NC) SPST switches. Per truth table on page 2, logic '0' turns SW1/SW4 OFF and SW2/SW3 ON; logic '1' reverses this state - enabling mixed-safety routing without external logic inversion.
Is DG613AEN-T1-E4 pin-compatible with DG611AEN-T1-E4 or DG612AEN-T1-E4?
Yes, DG613AEN-T1-E4 shares identical pinout and package (miniQFN-16) with DG611AEN-T1-E4 and DG612AEN-T1-E4, as shown in the functional block diagrams and pin configurations on pages 2–3 of Document 69904. Only the internal switch logic (NO vs NC assignment) differs.
What is the thermal resistance (θJA) of the miniQFN package used in DG613AEN-T1-E4?
The DG613AEN-T1-E4 in miniQFN-16 has a thermal resistance θJA of 152 °C/W, as specified in the Absolute Maximum Ratings table (page 3, note d). This value assumes JEDEC-standard PCB mounting with recommended copper pour and thermal vias per Document 66557.
DG613AEN-T1-E4 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay Siliconix
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NO/NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 115Ohm
- Channel-to-Channel Matching (ΔRon):
- 700mOhm
- Voltage - Supply, Single (V+):
- 2.7V ~ 12V
- Voltage - Supply, Dual (V±):
- ±2.7V ~ 5V
- Switch Time (Ton, Toff) (Max):
- 55ns, 35ns
- -3db Bandwidth:
- 720MHz
- Charge Injection:
- 1pC
- Channel Capacitance (CS(off), CD(off)):
- 2pF, 3pF
- Current - Leakage (IS(off)) (Max):
- 100pA
- Crosstalk:
- -90dB @ 10MHz
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-miniQFN (1.8x2.6)
DG613AEN-T1-E4 FAQ
1.How can I place an order for DG613AEN-T1-E4 through Aetrix?
Please submit a Request for Quotation (RFQ) for DG613AEN-T1-E4 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DG613AEN-T1-E4 reliable?
The price and inventory of DG613AEN-T1-E4 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DG613AEN-T1-E4 is usually 5 days.
3.What payment methods are accepted for DG613AEN-T1-E4?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DG613AEN-T1-E4 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DG613AEN-T1-E4?
DG613AEN-T1-E4 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DG613AEN-T1-E4 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DG613AEN-T1-E4?
For technical support, including DG613AEN-T1-E4 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DG613AEN-T1-E4 requirements.
6.How does Aetrix verify that DG613AEN-T1-E4 is sourced from the original manufacturer or authorized distributors?
All DG613AEN-T1-E4 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DG613AEN-T1-E4 meets industry standards.
7.What is the process for return or replacement of DG613AEN-T1-E4?
All DG613AEN-T1-E4 units undergo pre-shipment inspection (PSI). If there is an issue with DG613AEN-T1-E4, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DG613AEN-T1-E4 part is unused and in its original packaging.
Return procedure for DG613AEN-T1-E4:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DG613AEN-T1-E4 Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
