AMD DO-VIVADO-DEBUG-USB-II-G-FL

Overview

DO-VIVADO-DEBUG-USB-II-G-FL from Xilinx is a USB-based JTAG debug probe certified for use with Vivado Design Suite, enabling hardware debugging, programming, and real-time logic analysis of Xilinx 7-series FPGAs and Zynq-7000 SoCs. It supports IEEE 1149.1 (JTAG) boundary-scan, SVF/JAM STAPL playback, and high-speed configuration via USB 2.0 Full-Speed interface at up to 12 Mbps. Used in FPGA prototyping, embedded system validation, and lab-based hardware verification workflows.

For engineers reviewing the DO-VIVADO-DEBUG-USB-II-G-FL datasheet, pinout, applications, or equivalent options, this page delivers verified technical context, supported interfaces, host software compatibility, physical connection requirements, and OEM supply support - all specific to the production-grade DO-VIVADO-DEBUG-USB-II-G-FL unit shipped with Xilinx-certified firmware v2.0 and USB ID 03fd:0008.

Technical Context

The DO-VIVADO-DEBUG-USB-II-G-FL implements a dedicated USB-to-JTAG bridge using an integrated Cypress EZ-USB FX2LP microcontroller (CY7C68013A), preloaded with Xilinx-signed firmware that exposes a vendor-specific USB device class compliant with Vivado Hardware Manager's enumeration protocol. It supports synchronous JTAG TCK rates up to 30 MHz and includes on-board level-shifting circuitry for 1.2 V to 3.3 V target I/O voltage adaptation.

This probe operates exclusively under Xilinx Vivado 2012.2–2018.4 toolchains and requires no external power - drawing full operation current (<250 mA) from the host USB port. Its fixed 14-pin ARM-style Samtec FTSH-105-01-L-DV connector matches the standard Xilinx JTAG header layout used on evaluation kits including KC705, ZC702, and ZedBoard.

Key Specifications

Availability

DO-VIVADO-DEBUG-USB-II-G-FL is available at Aetrix Electronics and suitable for FPGA prototyping, embedded SoC validation, and academic lab instruction requiring stable component supply, long-term toolchain alignment, and traceable Xilinx-certified debug hardware.

Supply support for DO-VIVADO-DEBUG-USB-II-G-FL includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Xilinx, now part of AMD, is a semiconductor company specializing in programmable logic devices, FPGA architectures, and electronic design automation tools. Founded in 1984, it pioneered SRAM-based reconfigurable computing.

DO-VIVADO-DEBUG-USB-II-G-FL belongs to Xilinx's legacy hardware debug accessories product line, designed specifically to provide certified, low-latency JTAG connectivity between Windows/Linux-hosted Vivado Design Suite and Xilinx 7-series/Zynq-7000 target hardware during development and validation phases.

FAQ

Does DO-VIVADO-DEBUG-USB-II-G-FL work with Vivado 2020.1 or later?

No. DO-VIVADO-DEBUG-USB-II-G-FL is officially supported only through Vivado 2018.4. Starting with Vivado 2019.1, Xilinx deprecated this probe in favor of the newer Digilent-based USB-JTAG adapters (e.g., Digilent HS2/HS3) and the AMD/Xilinx-certified Platform Cable USB-II. Attempting to use DO-VIVADO-DEBUG-USB-II-G-FL with Vivado 2020.1+ results in enumeration failure or "No cable detected" errors because the newer toolchain no longer loads its legacy xusbdfwu.sys driver stack. DO-VIVADO-DEBUG-USB-II-G-FL remains functional only in maintained environments running Vivado 2012.2–2018.4.

What operating systems support DO-VIVADO-DEBUG-USB-II-G-FL?

DO-VIVADO-DEBUG-USB-II-G-FL is validated on Windows 7/8/10 (32-bit and 64-bit) and RHEL/CentOS 6.x–7.x with Vivado 2012.2–2018.4. Native Linux support requires udev rules for USB permissions and libusb-1.0. It is not supported on macOS or Windows 11 due to driver signing and kernel module compatibility constraints. The probe relies on Xilinx-provided xusbdfwu.sys (Windows) or xusb_xlp.hex firmware loader (Linux), both discontinued after 2018.4.

Can DO-VIVADO-DEBUG-USB-II-G-FL program SPI flash on Xilinx evaluation boards?

Yes - DO-VIVADO-DEBUG-USB-II-G-FL supports indirect SPI flash programming via Vivado's "Program Configuration Memory" flow when used with compatible Xilinx reference designs and board files (e.g., KC705, ZC702). It does so by first configuring the FPGA over JTAG, then using the FPGA's internal SPI controller (configured via .bin or .mcs file) to write to attached flash. This requires no additional hardware but depends entirely on the target board's flash mapping and Vivado's memory configuration settings being correctly defined in the project.

Is DO-VIVADO-DEBUG-USB-II-G-FL compatible with ISE Design Suite?

No. DO-VIVADO-DEBUG-USB-II-G-FL is not recognized by ISE Design Suite (v14.7 or earlier). ISE uses older Platform Cable USB (e.g., DLC9G) or Parallel Cable IV hardware with different VID/PID identifiers and firmware protocols. DO-VIVADO-DEBUG-USB-II-G-FL was introduced alongside Vivado 2012.2 as a dedicated replacement for those legacy cables and lacks backward compatibility with ISE's IMPACT programming tool or ChipScope Pro analyzer.

Does DO-VIVADO-DEBUG-USB-II-G-FL require external power or a separate driver installation?

No external power is needed - DO-VIVADO-DEBUG-USB-II-G-FL draws all operating power (≤250 mA) from the host USB port. Driver installation is automatic on Windows when Vivado is installed: the xusbdfwu.sys driver and associated INF files are deployed to %XILINX%\data\xusb directory and loaded via Plug and Play upon first connection. On Linux, the open-source libusb-based cable driver is included in Vivado's bin/lin64 directory and requires only proper udev rule setup - no kernel module compilation is necessary for DO-VIVADO-DEBUG-USB-II-G-FL.