My Inquiry
My Account
Analog Devices Inc./Maxim Integrated DS1033Z-10/T&R
- Part No.:
- DS1033Z-10/T&R
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Category:
- Delay Lines
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
DS1033Z-10/T&R.pdf
- Description:
- IC DELAY LINE 10NS 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:2,016
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
DS1033Z-10/T&R from Maxim Integrated (formerly Dallas Semiconductor) is a low-voltage, all-silicon 3-channel delay line IC operating at 3.3 V with ±10 ns nominal delay per output, ±1.5 ns initial tolerance, and stable leading/trailing edge precision across 0°C to 70°C. It serves as a timing-matched signal skew compensator in high-speed digital interfaces.
For engineers reviewing the DS1033Z-10/T&R datasheet, DS1033Z-10/T&R pinout, DS1033Z-10/T&R application, or DS1033Z-10/T&R equivalent, key selection criteria include guaranteed 10 ns delay matching across three outputs, 8-pin SOIC (150-mil) tape-and-reel packaging, and voltage/temperature stability for clock/data alignment in FPGA I/O, memory interface, and test equipment designs.
Technical Context
The DS1033Z-10/T&R implements three independent buffered delay paths with identical 10 ns propagation delay (tPLH/tPHL), each preserving input signal symmetry via matched rise/fall edge accuracy. It operates within 2.7 V–3.6 V supply range and delivers sub-nanosecond edge-to-edge consistency under nominal conditions.
No internal logic or programmability is present - it is a fixed-delay analog-timing device using silicon-based delay elements. All outputs are CMOS-compatible, with specified IOH/IOL drive capability and 10 pF input capacitance, enabling direct connection to standard logic families without external termination.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Delay per output | 10 ns - fixed, matched delay across IN1→OUT1, IN2→OUT2, IN3→OUT3 for precise signal alignment |
| Initial delay tolerance | ±1.5 ns - ensures tight channel-to-channel skew control at +25°C, VCC = 3.3 V |
| Tolerance over temp/volt | ±1.0 ns - adds worst-case drift margin for operation across 0°C–70°C and 2.7 V–3.6 V |
| Supply voltage range | 2.7 V to 3.6 V - compatible with modern low-voltage logic domains including LVTTL and LVCMOS |
| Input capacitance | 10 pF - minimizes loading on upstream drivers and supports clean edge integrity up to 100 MHz |
| Output drive strength | IOL = 8 mA / IOH = −1 mA - sufficient to drive one 74F04-equivalent load per output |
Pinout & Package
DS1033Z-10/T&R is supplied in an 8-pin SOIC (150-mil) package with gull-wing leads, optimized for vapor-phase, IR, and wave soldering processes. Tape-and-reel packaging supports automated SMT assembly.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1, IN2, IN3 | Independent input signals | Three asynchronous inputs, each routed to its corresponding delayed output with no crosstalk |
| OUT1, OUT2, OUT3 | Delayed output signals | Each provides identical 10 ns delay relative to its input; outputs are CMOS-buffered and rail-to-rail |
| VCC | Positive supply | Single 2.7–3.6 V supply powers all three delay channels; decoupling required near pin |
| GND | Ground reference | Common return path for all inputs, outputs, and internal circuitry; must be low-impedance |
| NC | No connection | Unbonded pin - must remain unconnected to avoid parasitic coupling or latch-up risk |
Key Features
| Feature | Design Value |
|---|---|
| All-silicon delay architecture | Eliminates quartz or LC-based timing components - enables full IC integration, shock/vibration immunity, and long-term aging stability |
| Matched leading/trailing edge delay | Preserves 50% duty cycle integrity across all three outputs - critical for clock distribution and DDR strobe alignment |
| Three independent buffered delays | Enables simultaneous skew correction of multiple signals without shared loading or timing interaction |
| Standard 8-pin SOIC footprint | Direct drop-in compatibility with legacy DS1033M DIP layouts when using SOIC adapter or redesign; supports high-density PCBs |
Applications
| High-Speed Memory Interface | FPGA I/O Timing Alignment |
|---|---|
Use Scenario: Aligning address/control strobes with data valid windows in DDR2/DDR3 memory subsystems. IC Role / Device Role / Timing Role: DS1033Z-10/T&R applies identical 10 ns delay to command lines to match trace-length-induced skew on data bus. Use Value: Enables deterministic setup/hold timing margins without custom PCB length tuning or FPGA delay calibration. | Use Scenario: Matching input capture timing across parallel I/O banks receiving synchronized sensor data streams. IC Role / Device Role / Timing Role: DS1033Z-10/T&R delays clock and frame-sync signals to align with variable-latency ADC outputs. Use Value: Reduces FPGA logic resource usage for dynamic deskew and eliminates need for multi-cycle path constraints. |
| ATE Signal Path Calibration | Digital Test Equipment Trigger Distribution |
Use Scenario: Compensating for fixed interconnect delays between pattern generator and DUT interface boards. IC Role / Device Role / Timing Role: DS1033Z-10/T&R introduces calibrated, repeatable delay to synchronize stimulus and response sampling clocks. Use Value: Improves measurement repeatability by removing cable- and connector-dependent jitter contributions. | Use Scenario: Distributing synchronized trigger pulses to multiple instrument modules with matched latency. IC Role / Device Role / Timing Role: DS1033Z-10/T&R delays individual trigger outputs to compensate for unequal trace lengths on backplane. Use Value: Achieves sub-nanosecond inter-module trigger skew - essential for time-domain reflectometry and jitter analysis systems. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar fixed-delay line applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DS1033M-10 | Same electrical specs, but in 8-pin DIP (600-mil) package - no tape-and-reel option | Preferred for prototyping, through-hole assembly, or legacy board upgrades | Select DS1033M-10 only if manual soldering or socket-based evaluation is required |
| MAX9601EUA+ | Programmable 0–100 ns delay in 100 ps steps; higher power, 10-pin µMAX; requires SPI configuration | Suitable where dynamic delay adjustment or multi-channel programmability is needed | Choose MAX9601EUA+ only when reconfigurable delay is mandatory - not a drop-in replacement |
Compared with DS1033Z-10/T&R, DS1033M-10 offers identical timing performance but lacks SMT-ready packaging, while MAX9601EUA+ trades fixed simplicity for programmability at higher cost, complexity, and power - making DS1033Z-10/T&R optimal for static, high-volume, space-constrained delay compensation.
Availability
DS1033Z-10/T&R is available at Aetrix Electronics and suitable for high-speed memory interface, FPGA timing alignment, and automated test equipment requiring stable component supply with consistent 10 ns delay matching and industrial temperature support.
Supply support for DS1033Z-10/T&R includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Maxim Integrated (acquired by Analog Devices in 2021) is a U.S.-based semiconductor company specializing in precision analog, mixed-signal, and high-reliability timing solutions.
The DS1033 series was developed by Dallas Semiconductor to replace quartz-based delay lines with robust, monolithic silicon alternatives for digital system timing, targeting applications demanding repeatable, temperature-stable skew control.
FAQ
What is the exact delay value and tolerance of DS1033Z-10/T&R?
The DS1033Z-10/T&R provides a nominal 10 ns delay per channel (IN1→OUT1, IN2→OUT2, IN3→OUT3), with ±1.5 ns initial tolerance at +25°C and VCC = 3.3 V. Over the full operating range (0°C to 70°C, 2.7 V to 3.6 V), additional tolerance is ±1.0 ns - resulting in a total worst-case delay window of 10 ns ±2.5 ns.
Does DS1033Z-10/T&R support both rising and falling edge delay accuracy?
Yes, DS1033Z-10/T&R guarantees matched delay for both edges: tPLH (rising) and tPHL (falling) are identical at 10 ns per output, preserving input signal symmetry and duty cycle integrity - a key requirement for clock distribution and strobe alignment applications.
Can DS1033Z-10/T&R be used with 5 V logic systems?
No, DS1033Z-10/T&R is strictly a +3.3 V device with absolute maximum VCC of +6.0 V but specified operation only from 2.7 V to 3.6 V. Driving its inputs with 5 V signals exceeds VIH limits and risks damage; level-shifting is required for interfacing with 5 V logic.
Is the NC pin on DS1033Z-10/T&R safe to tie to ground or leave floating?
The NC pin on DS1033Z-10/T&R must remain unconnected - it is internally unbonded. Neither grounding nor floating is recommended; physical disconnection prevents parasitic coupling or unintended substrate interactions that could affect delay stability or noise immunity.
What package type and reel specifications does DS1033Z-10/T&R ship in?
DS1033Z-10/T&R is supplied in an 8-pin SOIC (150-mil) package with gull-wing leads and shipped in EIA-481-compliant tape-and-reel format. Standard reel quantity is 2,500 units per 13-inch reel, compatible with high-speed pick-and-place equipment.
DS1033Z-10/T&R Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc./Maxim Integrated
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Bulk
- Product Status:
- Obsolete
- Number of Taps/Steps:
- -
- Function:
- Multiple, NonProgrammable
- Delay to 1st Tap:
- 10ns
- Tap Increment:
- -
- Available Total Delays:
- 10ns
- Number of Independent Delays:
- 3
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- 0°C ~ 70°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
DS1033Z-10/T&R FAQ
1.How can I place an order for DS1033Z-10/T&R through Aetrix?
Please submit a Request for Quotation (RFQ) for DS1033Z-10/T&R on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for DS1033Z-10/T&R reliable?
The price and inventory of DS1033Z-10/T&R are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for DS1033Z-10/T&R is usually 5 days.
3.What payment methods are accepted for DS1033Z-10/T&R?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for DS1033Z-10/T&R transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for DS1033Z-10/T&R?
DS1033Z-10/T&R orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your DS1033Z-10/T&R order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for DS1033Z-10/T&R?
For technical support, including DS1033Z-10/T&R datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your DS1033Z-10/T&R requirements.
6.How does Aetrix verify that DS1033Z-10/T&R is sourced from the original manufacturer or authorized distributors?
All DS1033Z-10/T&R products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that DS1033Z-10/T&R meets industry standards.
7.What is the process for return or replacement of DS1033Z-10/T&R?
All DS1033Z-10/T&R units undergo pre-shipment inspection (PSI). If there is an issue with DS1033Z-10/T&R, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The DS1033Z-10/T&R part is unused and in its original packaging.
Return procedure for DS1033Z-10/T&R:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
DS1033Z-10/T&R Tags
-
LTC6994CS6-1#TRMPBF
Analog Devices Inc.
-
LTC6994CDCB-1#TRMPBF
Analog Devices Inc.
-
LTC6994IS6-1#TRMPBF
Analog Devices Inc.
-
LTC6994IS6-1#TRPBF
Analog Devices Inc.
-
LTC6994IDCB-1#TRMPBF
Analog Devices Inc.
-
LTC6994IS6-2#TRMPBF
Analog Devices Inc.
-
LTC6994HS6-1#TRPBF
Analog Devices Inc.
-
LTC6994HS6-1#TRMPBF
Analog Devices Inc.
-
LTC6994HS6-2#TRMPBF
Analog Devices Inc.
-
LTC6994HDCB-2#TRMPBF
Analog Devices Inc.
-
LTC6994HDCB-1#TRMPBF
Analog Devices Inc.
-
DS1124U-25+T
Analog Devices Inc./Maxim Integrated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
