Analog Devices Inc. EV1HMC1160LP5

Overview

EV1HMC1160LP5 from Analog Devices is an evaluation board for the HMC1160 monolithic microwave integrated circuit (MMIC) voltage-controlled oscillator, providing dual RF outputs at 8.45–9.30 GHz and 4.225–4.65 GHz, delivering 12 dBm typical output power with −116 dBc/Hz phase noise at 100 kHz offset, designed for RF system validation in point-to-point radio and test equipment.

For engineers reviewing the EV1HMC1160LP5 datasheet, EV1HMC1160LP5 pinout, EV1HMC1160LP5 application, or EV1HMC1160LP5 equivalent, this evaluation platform enables rapid characterization of the HMC1160 VCO's tuning linearity, output power stability over temperature, harmonic suppression, and half-frequency output integrity under real-world 50 Ω RF interface conditions.

Technical Context

The EV1HMC1160LP5 is a dedicated evaluation PCB for the HMC1160LP5E LFCSP-VQ packaged MMIC VCO, featuring SMA RF connectors (J1–J4), dc headers (J5–J6), and optimized decoupling network including 100 pF (C1–C3), 1000 pF (C4), 2.2 μF tantalum (C5–C7), and 0.01 μF (C8) capacitors to support stable 5 V biasing and low-noise tuning voltage delivery.

It implements proper RF layout practices: Rogers 4350 substrate, controlled 50 Ω microstrip traces, direct grounding of the HMC1160's exposed paddle and GND pins via multiple vias, and separation of RF, supply, and tuning signal paths to minimize coupling-enabling accurate measurement of phase noise, pulling, pushing, and frequency drift across −40°C to +85°C.

Key Specifications

Availability

EV1HMC1160LP5 is available at Aetrix Electronics and suitable for RF design validation, VCO characterization, microwave subsystem prototyping, and production test fixture development requiring stable component supply and traceable evaluation hardware.

Supply support for EV1HMC1160LP5 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. is a global leader in high-performance analog, mixed-signal, and RF ICs, serving communications, industrial, automotive, and instrumentation markets with precision signal processing solutions.

The EV1HMC1160LP5 belongs to Analog Devices' RF & Microwave Evaluation Platform product line, engineered specifically to accelerate time-to-test for MMIC VCOs by providing calibrated, application-ready layouts that preserve datasheet-grade performance fidelity.

FAQ

What is the EV1HMC1160LP5 used for?

The EV1HMC1160LP5 is an evaluation board designed exclusively for characterizing the HMC1160LP5E MMIC VCO. It enables engineers to measure key parameters-including tuning voltage vs. frequency linearity, output power flatness, phase noise, harmonic content, and temperature stability-under controlled 50 Ω RF and bias conditions without custom PCB development. The EV1HMC1160LP5 itself contains no active silicon beyond the mounted HMC1160LP5E device.

Does the EV1HMC1160LP5 include the HMC1160LP5E IC?

Yes, the EV1HMC1160LP5 evaluation board includes one pre-mounted HMC1160LP5E MMIC VCO in a 32-lead LFCSP_VQ package. The board is shipped fully assembled with all passive components installed, ready for immediate connection to RF test equipment and DC power supplies. No additional soldering or component placement is required to begin evaluation of the EV1HMC1160LP5.

What RF connectors are used on the EV1HMC1160LP5?

The EV1HMC1160LP5 uses four SMA female connectors: J1 and J2 for RFOUT and RFOUT/2 outputs respectively, J3 for VCC input, and J4 for VTUNE input. These connectors are mounted directly on 50 Ω microstrip lines routed from the HMC1160LP5E's RFOUT, RFOUT/2, VCC, and VTUNE pins, preserving signal integrity up to 10 GHz. J5 and J6 are 2 mm pitch dc headers for optional probing or alternate bias routing.

Can the EV1HMC1160LP5 be used for production applications?

No, the EV1HMC1160LP5 is strictly an evaluation and development tool-not qualified for production deployment. Its layout, component selection, and mechanical construction prioritize measurement accuracy and debug flexibility over environmental ruggedness, long-term reliability, or regulatory compliance. For production, designers must integrate the HMC1160LP5E into their own application-specific PCB using the layout guidelines and decoupling recommendations from the HMC1160 datasheet-not the EV1HMC1160LP5 board.

Where can I find the schematic and layout files for the EV1HMC1160LP5?

Analog Devices provides the full schematic, bill of materials, and Gerber layout files for the EV1HMC1160LP5 upon request through their technical support portal or authorized distributors. These files are essential for understanding grounding strategy, via placement under the exposed paddle, capacitor footprints, and RF trace geometry-critical inputs when adapting HMC1160LP5E integration into custom designs. The EV1HMC1160LP5 documentation references PCB1 as part number 110225.