Analog Devices Inc. EVAL-ADAQ4001FMCZ

Overview

EVAL-ADAQ4001FMCZ from Analog Devices is a field-programmable gate array (FPGA) mezzanine card (FMC)-based evaluation kit for the ADAQ4001 16-bit, 2 MSPS µModule® data acquisition system. It integrates an EVAL-ADAQ4001PMDZ Pmod board and an EVAL-PMD-IB1Z Pmod-to-FMC interposer to enable high-fidelity analog signal capture, time-domain analysis, and FFT-based frequency-domain characterization via SPI interface with the EVAL-SDP-CH1Z controller.

For engineers reviewing the EVAL-ADAQ4001FMCZ datasheet, EVAL-ADAQ4001FMCZ pinout, EVAL-ADAQ4001FMCZ application, or EVAL-ADAQ4001FMCZ equivalent, this kit provides validated hardware-software co-design support for precision ADC evaluation, µModule signal chain validation, and rapid prototyping of high-resolution data acquisition systems in test & measurement, industrial instrumentation, and scientific instrumentation applications.

Technical Context

The EVAL-ADAQ4001FMCZ implements a full-system signal path: differential SMB analog inputs (J1/J2) feed into ADA4898-1 unity-gain buffers, then route through AD8251 programmable gain instrumentation amplifiers and LT5400-4 matched resistor networks before reaching the ADAQ4001 µModule. Power is supplied via FMC connector (3.3 V) or optional ±15.5 V bench supplies, regulated by ADP5070, LT3032, and LT3023 ICs to generate independent ±15 V, +5.5 V, and µModule core rails.

It interfaces exclusively with the EVAL-SDP-CH1Z (SDP-H1) controller board using a 160-pin FMC low-pin-count connector supporting LVDS and single-ended CMOS signaling. Communication uses SPI at up to 75 MHz (Turbo Mode) to achieve the full 2 MSPS throughput, with ACE software providing real-time waveform, histogram, FFT, INL/DNL, and noise/dynamic performance analysis.

Key Specifications

Availability

EVAL-ADAQ4001FMCZ is available at Aetrix Electronics and suitable for test & measurement equipment development, industrial process monitoring, and scientific instrumentation requiring stable component supply, traceable evaluation hardware, and validated µModule interface compatibility.

Supply support for EVAL-ADAQ4001FMCZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Analog Devices, Inc. (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing semiconductors, headquartered in Wilmington, MA.

EVAL-ADAQ4001FMCZ belongs to ADI's µModule evaluation platform family, designed to accelerate adoption of integrated signal chain solutions by providing production-ready, fully characterized hardware and software for precision data acquisition subsystems.

FAQ

What is the primary function of the EVAL-ADAQ4001FMCZ?

The EVAL-ADAQ4001FMCZ is a complete evaluation platform for the ADAQ4001 µModule, enabling engineers to characterize its 16-bit, 2 MSPS SAR ADC performance-including SNR, THD, INL/DNL, and FFT-using industry-standard FMC infrastructure and ACE software. It is not a standalone product but a validated hardware-software system for rapid µModule validation and signal chain design.

Which controller board is required to operate the EVAL-ADAQ4001FMCZ?

The EVAL-ADAQ4001FMCZ requires the EVAL-SDP-CH1Z (SDP-H1) system demonstration platform as its mandatory host controller. The SDP-H1 provides SPI communication, power regulation, FPGA-based data capture, and USB 2.0 connectivity to the PC. No other controller board is supported or validated for use with the EVAL-ADAQ4001FMCZ.

Can the EVAL-ADAQ4001FMCZ be used with the ADAQ4003 µModule?

No. The EVAL-ADAQ4001FMCZ is specifically configured for the ADAQ4001 µModule and includes firmware, ACE plugin, and hardware settings optimized for its 16-bit resolution and associated signal chain components. While the kit shares physical board assets with the EVAL-ADAQ4003FMCZ variant, the EVAL-ADAQ4001FMCZ does not support or validate ADAQ4003 operation.

Does the EVAL-ADAQ4001FMCZ include on-board power regulation?

Yes. The EVAL-ADAQ4001FMCZ incorporates ADP5070, LT3032, and LT3023 regulators to generate independent ±15 V, +5.5 V, and configurable µModule supply rails (1.8 V/3.3 V/5.5 V) from either the FMC 3.3 V supply or external ±15.5 V bench sources. This eliminates need for external power modules during standard evaluation.

What software is needed to evaluate the EVAL-ADAQ4001FMCZ?

The EVAL-ADAQ4001FMCZ requires Analog Devices' ACE (Analysis | Control | Evaluation) software with the dedicated ADAQ4001 plugin. ACE provides real-time waveform visualization, histogram analysis, FFT computation (with windowing and harmonic analysis), INL/DNL measurement, and export of captured data in XML format. SDP-H1 drivers must also be installed prior to hardware connection.