STMicroelectronics EVL6206-PLUG

Overview

EVL6206-PLUG from STMicroelectronics is a plug-in evaluation board designed to interface with the EVL62XX-MAIN baseboard for rapid prototyping of stepper and brush DC motor drivers based on the L6206PD H-bridge IC. It supports 8 V–52 V supply voltage, delivers up to 2.8 A r.m.s. phase current, and features programmable high-side overcurrent protection and Arduino UNO R3 connector compatibility.

For engineers reviewing the EVL6206-PLUG datasheet, EVL6206-PLUG pinout, EVL6206-PLUG application, or EVL6206-PLUG equivalent, this board enables fast validation of dual H-bridge motor control topologies, PWM current regulation, fault reporting (FAULTA/FAULTB), and microstepping configuration via PROGCLA/PROGCLB inputs in conjunction with STSPIN Studio software.

Technical Context

The EVL6206-PLUG implements the L6206PD dual full-bridge driver in PDIP-36 package, supporting bipolar stepper and dual brushed DC motor control. It uses external sense resistors (SENSEA/SENSEB) for current sensing and integrates VCP charge pump for high-side gate drive.

Its control interface accepts step/direction (IN1A/CLOCK, IN2A/C–CCW), enable (ENA_RST, ENB_ENABLE), and half/full-step (IN2B/HALF_FULL) signals. Programmable overcurrent thresholds are set via PROGCLA/PROGCLB pins, and fault status is reported on dedicated FAULTA/FAULTB outputs.

Key Specifications

Availability

EVL6206-PLUG is available at Aetrix Electronics and suitable for industrial automation, robotics prototyping, and laboratory motor control validation requiring stable component supply and rapid design iteration.

Supply support for EVL6206-PLUG includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, specializing in microcontrollers, power management, analog, MEMS, and motor control solutions.

The EVL6206-PLUG belongs to ST's L62xx evaluation kit family, engineered specifically to accelerate development of cost-sensitive, high-reliability motor drive systems for industrial and consumer applications.

FAQ

Is EVL6206-PLUG compatible with STM32 Nucleo boards?

Yes. The EVL6206-PLUG is designed to mount directly onto the EVL62XX-MAIN baseboard, which features native STM32 Nucleo compatibility via standardized pin headers and signal routing aligned with STSPIN Studio firmware interfaces.

What motor driver IC does EVL6206-PLUG host?

EVL6206-PLUG hosts the L6206PD - a dual full-bridge H-bridge driver in PDIP-36 package, rated for 52 V operation and 2.8 A r.m.s. output current per channel, with integrated charge pump and programmable overcurrent protection.

Does EVL6206-PLUG require external power or share power with EVL62XX-MAIN?

EVL6206-PLUG receives logic power (VDD) and motor power (VS) from the EVL62XX-MAIN baseboard via its 40-pin header; no separate power connection is needed. Motor supply (8–52 V) is delivered through the MAIN board's VIN terminals.

Can EVL6206-PLUG be used standalone without EVL62XX-MAIN?

No. EVL6206-PLUG is a plug-in module only - it lacks onboard microcontroller, USB interface, or power regulation. It must be mated with the EVL62XX-MAIN baseboard to provide control signals, power distribution, and host connectivity.