My Inquiry
My Account
Diodes Incorporated FMMT723QTA
- Part No.:
- FMMT723QTA
- Manufacturer:
- Diodes Incorporated
- Category:
- Single Bipolar Transistors
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
FMMT723QTA.pdf
- Description:
- TRANS PNP 100V 1A SOT-23-3
- Quantity:
- Payment:
- Shipping:
Inventory:98,340
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
FMMT723QTA from Diodes Incorporated is a 100V PNP low-saturation transistor in SOT23 package, designed for high-side switching and load disconnect applications. It delivers -1A continuous collector current, -330mV VCE(sat) at -1A, and 210mΩ equivalent on-resistance, with AEC-Q101 qualification for automotive reliability.
For engineers reviewing the FMMT723QTA datasheet, FMMT723QTA pinout, FMMT723QTA application, or FMMT723QTA equivalent, key selection criteria include its -100V VCEO, -1A IC, low RCE(SAT), AEC-Q101 compliance, and SOT23 thermal performance under pulsed and DC conditions.
Technical Context
This PNP bipolar junction transistor operates as a high-voltage, high-current switch with characterized hFE up to -1.5A and guaranteed BVCEO ≥ -100V. Its low saturation voltage and on-resistance enable efficient power control in constrained space.
The device uses standard SOT23 packaging with matte tin-plated leads and meets J-STD-020 Level 1 moisture sensitivity. Thermal resistance is 155°C/W (J-A, t ≤ 5s) and 194°C/W (J-L), supporting stable operation from -55°C to +150°C.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | -100 V - Withstands 100V collector-emitter reverse bias without breakdown in switching applications |
| IC (continuous) | -1 A - Supports sustained 1A load current in high-side driver circuits |
| VCE(sat) | < -330 mV @ -1A - Minimizes conduction loss and self-heating during active switching |
| RCE(SAT) | 210 mΩ - Enables precise on-state resistance modeling for power budgeting |
| hFE | 30–250 @ -1A to -1.5A - Provides predictable base drive requirements across full operating range |
| fT | 150–200 MHz - Supports fast switching in motor drive and PWM control loops |
| PD (t ≤ 5s) | 806 mW - Allows short-duration peak power handling beyond steady-state limits |
Pinout & Package
Package: SOT23 - Surface-mount plastic case, 0.008 g weight, UL 94V-0 rated, lead-free and halogen-free "Green" compound.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Emitter) | Current source terminal | Connected to supply rail in high-side configuration; carries full load current |
| 2 (Base) | Control input | Receives negative drive current (-150mA typical for full saturation at -1A IC) |
| 3 (Collector) | Switched output terminal | Connected to load; voltage swings between near-ground and -100V during operation |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive underhood environments including temperature cycling, humidity, and vibration stress |
| Low RCE(SAT) | 210mΩ enables <100mW conduction loss at 1A, reducing thermal design margin requirements |
| High VCEO | -100V rating supports 48V and 60V industrial bus systems with safety margin |
| Characterized hFE to -1.5A | Ensures predictable base drive sizing across full load range without gain collapse |
| SOT23 thermal performance | RθJL = 194°C/W allows direct solder-point thermal path optimization on PCB |
Applications
| High-Side Driver | Load Disconnect Switch |
|---|---|
Use Scenario: Controlling power to solenoids or LED arrays in 24–48V automotive subsystems. IC Role / Device Role / Timing Role: PNP transistor configured as high-side switch, turning on/off load current referenced to battery positive. Use Value: -100V VCEO and -330mV VCE(sat) ensure robust operation with minimal voltage drop and safe flyback handling. | Use Scenario: Isolating ECU power domains during sleep mode or fault conditions. IC Role / Device Role / Timing Role: Load disconnect element enabling controlled power sequencing and leakage current suppression. Use Value: -1A IC and -100V blocking capability support reliable domain isolation in ASIL-B compliant systems. |
| Motor Drive | Industrial Power Control |
Use Scenario: Driving small DC motors in HVAC actuators or seat positioners. IC Role / Device Role / Timing Role: Low-side or complementary high-side switch in H-bridge or half-bridge configurations. Use Value: fT ≥ 150MHz and fast turn-on/turn-off times (50ns/760ns) support PWM frequencies up to 20kHz. | Use Scenario: Managing auxiliary power rails in programmable logic controllers and sensor interfaces. IC Role / Device Role / Timing Role: Discrete power switch replacing integrated load switches where higher voltage or custom drive is needed. Use Value: RCE(SAT) = 210mΩ and AEC-Q101 qualification provide deterministic on-resistance and long-term reliability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar PNP high-voltage switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| FMMT718QTA | VCEO = -60V, IC = -0.5A, VCE(sat) = -200mV @ -0.5A | Limited to lower-voltage 24V systems; reduced current capacity | Select when lower cost and reduced voltage margin are acceptable |
| ZXTN2012ZTA | PNP, VCEO = -100V, IC = -1.5A, but SOT89 package (higher thermal mass) | Requires larger PCB footprint; better steady-state thermal dissipation (RθJA ≈ 100°C/W) | Select when >625mW continuous power or improved thermal management is required |
Compared with FMMT718QTA, FMMT723QTA offers higher voltage and current ratings; compared with ZXTN2012ZTA, it trades thermal performance for compact SOT23 size-ideal for space-constrained automotive modules.
Availability
FMMT723QTA is available at Aetrix Electronics and suitable for automotive body control modules, industrial motor drives, and high-reliability power sequencing applications requiring stable component supply and AEC-Q101 traceability.
Supply support for FMMT723QTA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, serving automotive, industrial, computing, and consumer markets with a focus on reliability and efficiency.
FMMT723QTA belongs to Diodes' FMMT series of high-voltage, high-current transistors engineered specifically for automotive-grade power switching and load management in space-constrained designs.
FAQ
What is the maximum continuous collector current for FMMT723QTA?
The maximum continuous collector current is -1 A at TA = +25°C with appropriate PCB copper area. Derating applies above 25°C ambient per the datasheet curve: power dissipation drops linearly to zero at 150°C junction temperature.
Is FMMT723QTA pin-compatible with FMMT718QTA?
Yes-both use identical SOT23 pinout (Emitter-Base-Collector on pins 1-2-3). However, FMMT723QTA has higher VCEO (-100V vs. -60V) and IC (-1A vs. -0.5A), so substitution requires verification of voltage margin and thermal headroom.
Does FMMT723QTA require a heatsink in typical automotive applications?
No external heatsink is required. With RθJA = 155°C/W (t ≤ 5s) and 625mW steady-state power, a standard 25mm × 25mm 1oz copper pad provides sufficient thermal relief for most 1A pulsed or DC loads below 85°C ambient.
What is the base drive requirement to fully saturate FMMT723QTA at -1A collector current?
Full saturation at -1A requires -150mA base current, yielding VCE(sat) ≤ -330mV. Base-emitter saturation voltage is -0.89V typical under this condition, so drive circuitry must sink ≥150mA at ~0.9V forward drop.
FMMT723QTA Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Transistor Type:
- PNP
- Current - Collector (Ic) (Max):
- 1 A
- Voltage - Collector Emitter Breakdown (Max):
- 100 V
- Vce Saturation (Max) @ Ib, Ic:
- 330mV @ 150mA, 1A
- Current - Collector Cutoff (Max):
- 100nA
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 250 @ 500mA, 10V
- Power - Max:
- 625 mW
- Frequency - Transition:
- 200MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-23-3
FMMT723QTA FAQ
1.How can I place an order for FMMT723QTA through Aetrix?
Please submit a Request for Quotation (RFQ) for FMMT723QTA on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for FMMT723QTA reliable?
The price and inventory of FMMT723QTA are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for FMMT723QTA is usually 5 days.
3.What payment methods are accepted for FMMT723QTA?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for FMMT723QTA transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for FMMT723QTA?
FMMT723QTA orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your FMMT723QTA order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for FMMT723QTA?
For technical support, including FMMT723QTA datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your FMMT723QTA requirements.
6.How does Aetrix verify that FMMT723QTA is sourced from the original manufacturer or authorized distributors?
All FMMT723QTA products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that FMMT723QTA meets industry standards.
7.What is the process for return or replacement of FMMT723QTA?
All FMMT723QTA units undergo pre-shipment inspection (PSI). If there is an issue with FMMT723QTA, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The FMMT723QTA part is unused and in its original packaging.
Return procedure for FMMT723QTA:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
FMMT723QTA Tags
-
MMBT3906LT1G
onsemi
-
MMBT3904-7-F
Diodes Incorporated
-
MMBT3904LT1G
onsemi
-
MMBT3906-7-F
Diodes Incorporated
-
MMBT3904-TP
Micro Commercial Co
-
MMBT2222A-7-F
Diodes Incorporated
-
BC846BLT1G
onsemi
-
BC847B,215
Nexperia USA Inc.
-
SMMBT3904LT1G
onsemi
-
MMBT2222A-TP
Micro Commercial Co
-
MMBTA06LT1G
onsemi
-
MMBT2222ALT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
