Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Integrated Circuits (ICs) > Logic > Counters, Dividers

STMicroelectronics HCF4060YM013TR

Name: HCF4060YM013TR
Brand: STMicroelectronics
SKU: HCF4060YM013TR
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: HCF4060YM013TR

Manufacturer:: STMicroelectronics

Category:: Counters, Dividers

Package:: 16-SOIC (0.154", 3.90mm Width)

Datasheet:: HCF4060YM013TR.pdf

Description:: IC BINARY COUNTER 14-BIT 16SO

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:8,622

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

HCF4060YM013TR from STMicroelectronics is an automotive-grade 14-stage ripple-carry binary counter/divider with integrated RC/crystal oscillator, operating from 3 V to 20 V supply, featuring 14 buffered Q-output pins (Q4–Q14), RESET control, and Schmitt-trigger clock input. It delivers f_MAX = 24 MHz at V_DD = 15 V and supports AEC-Q100 qualified operation from –40 °C to +125 °C in SO16 package.

For engineers reviewing the HCF4060YM013TR datasheet, HCF4060YM013TR pinout, HCF4060YM013TR application, or HCF4060YM013TR equivalent, key selection criteria include oscillator configuration flexibility (RC or crystal), automotive temperature range compliance, ripple-carry timing behavior, reset-synchronized counter state, and output drive capability across 3–20 V supply rails.

Technical Context

The device integrates a two-phase oscillator (φ₀, φ₁) feeding a cascade of 14 master-slave flip-flops; counting advances on the negative transition of φ₁. The RESET input forces all outputs low and disables oscillator operation when high.

Schmitt-trigger action on the oscillator inputs permits unlimited rise/fall time; buffered I/O ensures noise immunity and fan-out capability. Quiescent current is specified down to 0.04 μA at V_DD = 5 V and up to 3 mA at V_DD = 20 V over full temperature range.

Key Specifications

Parameter	Value and Actual Design Meaning
Supply Voltage Range	3 V to 20 V - supports wide-battery-range automotive and industrial systems without external regulation
Operating Temperature	–40 °C to +125 °C - AEC-Q100 qualified for under-hood and powertrain applications
Max Clock Frequency	24 MHz at V_DD = 15 V - enables high-speed timing division for microcontroller clock prescaling
Output Drive (I_OL)	6.8 mA sink at V_DD = 15 V - directly drives LEDs, small relays, or logic inputs without buffer stages
Oscillator Input Type	Schmitt-trigger φ₀/φ₁ - eliminates need for external hysteresis components in RC timing networks
Counter Stages	14-stage ripple carry - provides binary division ratios up to 2¹⁴ = 16384 for long-interval timing
Reset Behavior	Synchronous active-high RESET - guarantees deterministic all-zero state and oscillator disable on command

Pinout & Package

Package: SO16 (Small Outline, 16-pin, 3.9 mm width, ECOPACK® compliant).

Pin/Terminal	Circuit Role	Design Meaning
1, 2, 3, 4, 5, 6, 7, 13, 14, 15	Q12, Q13, Q14, Q6, Q5, Q7, Q4, Q9, Q8, Q10	Buffered binary counter outputs - provide asynchronous divided clock signals with defined timing hierarchy
9, 10, 11	φ₀, φ₀, φ₁	Oscillator phase inputs - accept RC network or crystal; φ₀ is duplicated for layout convenience
12	RESET	Active-high synchronous reset - clears all flip-flops and halts oscillator when asserted
8	VSS	Negative supply reference - must be connected to system ground; no internal substrate tie
16	VDD	Positive supply rail - powers entire counter/oscillator; supports up to 20 V absolute max rating

Key Features

Feature	Design Value
Automotive qualification	AEC-Q100 Grade 2 (–40 °C to +125 °C) with advanced screening per AEC-Q001/Q002
Ripple-carry architecture	Deterministic propagation delay chain (t_PHL ≤ 200 ns/stage @ 15 V) enables predictable timing intervals
Integrated oscillator	Configurable as RC (e.g., 21.5 kHz ±1.5 kHz @ 10 V) or parallel-mode crystal circuit - reduces BOM count
Low quiescent current	0.04 μA typical @ 5 V, 25 °C - suitable for battery-backed timing and low-power sleep modes
Input leakage control	±0.3 μA max @ V_DD = 18 V - ensures reliable reset and clock edge detection in noisy environments

Applications

Engine Control Timing

Industrial PLC Cycle Monitor

Use Scenario: Generating precise crankshaft position intervals and ignition timing windows in 4- and 6-cylinder ICE control units.

IC Role / Device Role / Timing Role: 14-stage divider produces sub-harmonic clocks synchronized to engine RPM; RESET aligns counter to TDC pulse.

Use Value: Enables deterministic timing resolution down to 1/16384 of base oscillator frequency while maintaining AEC-Q100 reliability.

Use Scenario: Monitoring scan cycle duration in programmable logic controllers to detect firmware hangs or I/O timeouts.

IC Role / Device Role / Timing Role: RC oscillator + counter generates watchdog timeout window (e.g., 2.5 s); Q14 output triggers system reset if not refreshed.

Use Value: Eliminates need for external timer IC or microcontroller-based watchdog, reducing cost and single-point failure risk.

Consumer Appliance Sleep Timer

Automotive Interior Lighting Sequencer

Use Scenario: Providing user-selectable 1–120 minute shutdown delays in washing machines and microwaves.

IC Role / Device Role / Timing Role: Crystal-stabilized oscillator feeds counter; decoded Q outputs select preset intervals via simple logic gates.

Use Value: Delivers ±100 ppm accuracy over temperature without software overhead or crystal calibration routines.

Use Scenario: Controlling fade-in/fade-out sequence and dwell time for LED dome lights during door open/close events.

IC Role / Device Role / Timing Role: RC oscillator sets base period; Q6–Q10 outputs drive discrete MOSFETs or LED drivers in cascaded fashion.

Use Value: Achieves smooth 3–5 second lighting transitions using only passive RC components and no MCU involvement.

Equivalent & Alternatives

The following parts are listed as comparable options for similar binary counter/divider with oscillator applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
CD4060BE	Non-automotive grade; –55 °C to +125 °C; PDIP16 only; no AEC-Q100 qualification	Lacks automotive screening and SO16 packaging - unsuitable for production vehicles but acceptable for lab prototypes	Select when cost sensitivity outweighs qualification requirements and through-hole assembly is preferred
HCF4060M013TR	Same die, wider temp range (–55 °C to +125 °C), non-automotive marking, identical SO16 tape-and-reel packaging	Valid for industrial/commercial use cases requiring extended cold-start performance but no automotive validation	Choose for non-automotive high-reliability systems needing broader thermal margin than Y-grade

Compared with CD4060BE and HCF4060M013TR, the HCF4060YM013TR uniquely combines AEC-Q100 qualification, SO16 surface-mount compatibility, and guaranteed –40 °C startup - making it the only option qualified for volume automotive electronics where both form factor and environmental compliance are mandatory.

Availability

HCF4060YM013TR is available at Aetrix Electronics and suitable for automotive engine control units, industrial programmable logic controllers, consumer appliance timers, and automotive interior lighting systems requiring stable component supply across extended temperature ranges and long product lifecycles.

Supply support for HCF4060YM013TR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, digital, and mixed-signal ICs for automotive, industrial, and consumer markets.

The HCF4060 belongs to ST's legacy CMOS logic family optimized for robustness in harsh environments; it was engineered specifically for timing-critical functions in automotive and industrial control where reliability across voltage and temperature extremes is non-negotiable.

FAQ

What oscillator configurations does the HCF4060YM013TR support?

The device supports both RC and parallel-mode crystal oscillator configurations using pins φ₀ and φ₁. For RC mode, external resistor and capacitor values set frequency (e.g., 21.5 kHz ±1.5 kHz at 10 V); for crystal mode, a standard 1–10 MHz parallel-resonant crystal connects between φ₀ and φ₁ with load capacitors. Schmitt-trigger inputs eliminate need for external hysteresis.

How does the RESET function interact with the oscillator section?

A high-level signal on the RESET pin simultaneously forces all Q outputs low and disables the internal oscillator - preventing spurious clock edges during reset assertion. Oscillation resumes only after RESET returns low and the next valid φ₁ edge occurs. This ensures deterministic counter initialization and eliminates metastability during power-up or fault recovery.

Can the HCF4060YM013TR operate reliably below 5 V?

Yes - the device is fully specified from 3 V to 20 V. At 3 V, f_MAX drops to ~1.5 MHz, quiescent current remains <100 μA, and output drive falls to ~0.36 mA sink. All DC parameters including VIH/VIL margins and II leakage remain valid, enabling use in low-voltage battery-powered systems with appropriate timing budgeting.

Why are only 10 of the 14 counter outputs brought out to pins?

The SO16 package constrains pin count; ST selected Q4–Q14 (10 outputs) to cover the most commonly used division ratios (2⁴ = 16 to 2¹⁴ = 16384) while omitting Q0–Q3. These lower-order bits are typically less useful for long-interval timing and can be synthesized externally if needed - a deliberate trade-off favoring practical utility over theoretical completeness.

HCF4060YM013TR Specifications

Product attributes: Attribute value

Manufacturer:: STMicroelectronics

Series:: 4000

Package/Case:: 16-SOIC (0.154", 3.90mm Width)

Packaging:: Tape & Reel (TR)

Product Status:: Active

Logic Type:: Binary Counter

Direction:: Up

Number of Elements:: 1

Number of Bits per Element:: 14

Reset:: Asynchronous

Timing:: -

Count Rate:: 24 MHz

Trigger Type:: Negative Edge

Voltage - Supply:: 3 V ~ 20 V

Operating Temperature:: -40°C ~ 125°C

Grade:: Automotive

Qualification:: AEC-Q100

Mounting Type:: Surface Mount

Supplier Device Package:: 16-SO

HCF4060YM013TR FAQ

1.How can I place an order for HCF4060YM013TR through Aetrix?

Please submit a Request for Quotation (RFQ) for HCF4060YM013TR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for HCF4060YM013TR reliable?

The price and inventory of HCF4060YM013TR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for HCF4060YM013TR is usually 5 days.

3.What payment methods are accepted for HCF4060YM013TR?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for HCF4060YM013TR transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for HCF4060YM013TR?

HCF4060YM013TR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your HCF4060YM013TR order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for HCF4060YM013TR?

For technical support, including HCF4060YM013TR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your HCF4060YM013TR requirements.

6.How does Aetrix verify that HCF4060YM013TR is sourced from the original manufacturer or authorized distributors?

All HCF4060YM013TR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that HCF4060YM013TR meets industry standards.

7.What is the process for return or replacement of HCF4060YM013TR?

All HCF4060YM013TR units undergo pre-shipment inspection (PSI). If there is an issue with HCF4060YM013TR, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The HCF4060YM013TR part is unused and in its original packaging.

Return procedure for HCF4060YM013TR:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-09-09 Counterfeit Electronic Components: How to Detect, Authenticate, and Test Suspect Parts

Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …

2026-09-08 Obsolete Electronic Components: How to Source and Evaluate Replacements

A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.

2026-09-07 TTL vs CMOS Logic Levels: 74HC and 74HCT Compatibility Explained

TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.

2026-09-04 Logic Level Shifter: How to Connect 3.3V and 5V Logic Safely

A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.

2026-09-03 74HC595 vs TPIC6B595: Output Drive, Pinout, Current, and Load Selection

The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…

2026-09-02 74HC595 Pinout, Timing, Output Current, and Applications

The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…

2026-09-01 Latch vs Flip-Flop: Timing, Differences and Design Choices

A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…

2026-08-30 D Latch Circuit: Truth Table, Timing, ICs and Applications

A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …

2026-08-28 SR Latch Explained: NOR and NAND Circuits, Truth Tables, and Applications

An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…

2026-08-27 Latch Circuit: SR and D Latches, Truth Tables, Timing, and Applications

Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…