My Inquiry
My Account
Nexperia USA Inc. HEF4013BT-Q100J
- Part No.:
- HEF4013BT-Q100J
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Flip Flops
- Package:
- 14-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
HEF4013BT-Q100J.pdf
- Description:
- IC FF D-TYPE DUAL 1BIT 14SO
- Quantity:
- Payment:
- Shipping:
Inventory:3,513
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
HEF4013BT-Q100 from Nexperia is a dual D-type flip-flop with independent set and reset inputs, positive-edge clock triggering, Schmitt-trigger clock inputs for slow-edge tolerance, and AEC-Q100 Grade 1 qualification for automotive use. It operates from 3.0 V to 15.0 V, delivers symmetrical CMOS output drive (±1.1 mA at 5 V), and supports ambient temperatures up to +125 °C in SO14 packaging.
For engineers reviewing the HEF4013BT-Q100 datasheet, HEF4013BT-Q100 pinout, HEF4013BT-Q100 application, or HEF4013BT-Q100 equivalent, key selection criteria include its dual asynchronous set/clear capability, wide VDD range enabling direct 5/10/15 V system integration, edge-triggered reliability in noisy automotive environments, and SO14 package compatibility with legacy 4000-series footprint designs.
Technical Context
This device implements two independent edge-triggered D-type flip-flops, each with active-HIGH asynchronous set (nSD) and clear (nCD) inputs, and a Schmitt-triggered clock input (nCP) that accepts slow-rising signals without metastability risk. The functional table confirms synchronous data capture on LOW-to-HIGH transitions and immediate asynchronous control overriding clock timing.
Static characteristics guarantee VIH ≥ 11.0 V and VIL ≤ 4.0 V at 15 V supply, ensuring robust noise margins. Dynamic performance includes tPHL/tPLH as low as 20 ns at 15 V with 50 pF load, and setup/hold times of 15 ns/0 ns respectively - enabling reliable operation in high-speed counters and shift registers.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Logic Type | Dual D-type flip-flop with independent asynchronous set/clear |
| Supply Voltage Range | 3.0 V to 15.0 V - enables direct interface with 5 V, 10 V, and 15 V logic domains |
| Operating Temperature | -40 °C to +125 °C - qualified for under-hood automotive applications |
| Propagation Delay (15 V) | 22 + 0.16 × CL ns - sub-30 ns typical delay at 50 pF load supports >20 MHz clocking |
| Output Drive (5 V) | ±1.1 mA - sufficient to drive multiple CMOS loads or small capacitive buses |
| Input Hysteresis | Schmitt-trigger clock input - tolerates rise/fall times up to 3.75 μs/V at 5 V without added external conditioning |
| AEC-Q100 Grade | Grade 1 - certified for automotive powertrain and chassis systems per AEC standard |
Pinout & Package
HEF4013BT-Q100 uses the SO14 plastic small outline package (SOT108-1), 14-lead, 3.9 mm body width, with standard 1.27 mm lead pitch and gull-wing terminations compatible with automated PCB assembly.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 13 (1Q, 2Q) | True output | Non-inverted Q output for each flip-flop; rail-to-rail CMOS swing |
| 2, 12 (1Q, 2Q) | Complement output | Inverted Q output; enables toggle or differential signaling without external inverters |
| 3, 11 (1CP, 2CP) | Clock input | Positive-edge triggered; Schmitt-triggered for noise immunity and slow-edge tolerance |
| 4, 10 (1CD, 2CD) | Asynchronous clear | Active-HIGH direct reset - forces Q = LOW independent of clock state |
| 5, 9 (1D, 2D) | Data input | Synchronous D input sampled on rising clock edge; latched until next clock |
| 6, 8 (1SD, 2SD) | Asynchronous set | Active-HIGH direct set - forces Q = HIGH independent of clock state |
| 7 | Ground (VSS) | 0 V reference for all inputs/outputs; must be low-impedance return path |
| 14 | Supply (VDD) | Primary power rail; supports 3–15 V operation with internal clamp diodes on all inputs |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 1 qualification | Validated for automotive use across -40 °C to +125 °C ambient, including thermal cycling and humidity testing |
| Wide VDD range (3–15 V) | Eliminates level-shifting in mixed-voltage systems; supports legacy 5 V and modern 12 V automotive domains |
| Schmitt-trigger clock inputs | Enables direct connection to mechanical switches, RC oscillators, or slow microcontroller GPIO without external hysteresis |
| Asynchronous set/clear per flip-flop | Allows independent initialization or forced state control without clock dependency - critical for safety-critical reset sequences |
| Standardized symmetrical output drive | Matched sourcing/sinking capability ensures consistent timing in both logic states, reducing skew in cascaded logic |
Applications
| Automotive Body Control Module | Industrial Motor Start/Stop Sequencer |
|---|---|
Use Scenario: Latching door lock status and window position feedback in BCM with intermittent power loss. IC Role / Device Role / Timing Role: Dual flip-flop stores persistent state across ignition cycles using asynchronous set/clear for fail-safe initialization. Use Value: Eliminates need for external nonvolatile memory or backup capacitors due to deterministic power-on reset behavior and rail-tolerant inputs. |
Use Scenario: Implementing safe, interlocked motor enable/disable sequencing with hardware-enforced dead time. IC Role / Device Role / Timing Role: One flip-flop controls forward/reverse direction latch; second manages enable/disable with asynchronous clear for emergency stop. Use Value: Prevents shoot-through by decoupling control logic from MCU timing jitter - set/clear override guarantees immediate state transition. |
| Automotive Lighting Dimming Controller | Legacy Industrial Counter/Divider |
Use Scenario: Generating PWM dimming waveforms synchronized to vehicle CAN bus timing signals. IC Role / Device Role / Timing Role: Flip-flop divides master clock while maintaining phase alignment; Schmitt-trigger input rejects EMI from headlamp drivers. Use Value: Enables clean 50% duty-cycle division without external filtering; wide VDD range allows direct 12 V supply from lighting rail. |
Use Scenario: Upgrading aging 4013-based production line counters without board redesign. IC Role / Device Role / Timing Role: Pin-compatible replacement for legacy HEF4013B with enhanced automotive qualification and tighter parametric specs. Use Value: Maintains identical SO14 footprint and logic function while adding AEC-Q100 compliance and improved noise immunity. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual D-type flip-flop applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SN74HC74QPWRQ1 | Higher speed (tPD = 12 ns @ 5 V), but narrower VDD range (2–6 V); no Schmitt-trigger clock | Requires level-shifting in 12 V automotive systems; less tolerant of noisy clock sources | Select when operating strictly at 5 V with fast clocks and minimal EMI exposure |
| MC74HC74ADTR2G | Same VDD range (2–6 V), AEC-Q100 Grade 1, but lacks input clamp diodes and Schmitt-trigger clock | Needs external protection against overvoltage transients; requires clean clock edges | Prefer where board-level ESD/clamp protection already exists and clock signal integrity is guaranteed |
Compared with SN74HC74QPWRQ1 and MC74HC74ADTR2G, the HEF4013BT-Q100 uniquely combines 3–15 V operation, integrated input clamping, Schmitt-trigger clock tolerance, and AEC-Q100 qualification - making it the only choice for direct 12 V automotive signal conditioning without supporting components.
Availability
HEF4013BT-Q100 is available at Aetrix Electronics and suitable for automotive body control modules, industrial motor sequencers, lighting controllers, and legacy counter upgrades requiring stable component supply across extended temperature ranges and long product lifecycles.
Supply support for HEF4013BT-Q100 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on essential efficiency technologies, delivering high-performance logic, analog, and discrete components with automotive-grade reliability.
The HEF4013BT-Q100 belongs to Nexperia's automotive-qualified 4000-series logic family, designed specifically to replace legacy CMOS flip-flops in safety-critical automotive subsystems while maintaining pin and functional compatibility.
FAQ
Does HEF4013BT-Q100 support 12 V direct connection to automotive battery rails?
Yes - its 3.0 V to 15.0 V supply range and input clamp diodes allow direct connection to nominal 12 V automotive systems. Inputs tolerate voltages up to VDD + 0.5 V, and absolute maximum VDD is +18 V, accommodating load-dump transients when combined with appropriate external TVS protection.
Can the Schmitt-trigger clock input eliminate external RC filtering in switch-debounced circuits?
Yes - the built-in Schmitt trigger provides ~1.0 V hysteresis on the clock input, enabling reliable edge detection on mechanically switched or slowly varying signals without external components. Verified operation supports input transition rates as low as 0.08 μs/V at 15 V supply.
What is the minimum pulse width required on the asynchronous set/clear inputs?
The minimum nSD/nCD pulse width is 10 ns at 15 V supply (20 ns at 5 V), per Table 7. This ensures reliable asynchronous assertion even during fast transient events. Pulse width is independent of clock frequency and valid across the full -40 °C to +125 °C operating range.
Is HEF4013BT-Q100 pin-compatible with non-automotive HEF4013B variants?
Yes - the SO14 pinout matches legacy HEF4013B, CD4013BE, and MC14013B devices. All share identical pin assignments for VDD, VSS, clock, data, set, clear, and Q/Q outputs. Only electrical specifications (e.g., AEC-Q100 stress testing, wider VDD range) differ.
HEF4013BT-Q100J Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- 4000B
- Package/Case:
- 14-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Function:
- Set(Preset) and Reset
- Type:
- D-Type
- Output Type:
- Complementary
- Number of Elements:
- 2
- Number of Bits per Element:
- 1
- Clock Frequency:
- 40 MHz
- Max Propagation Delay @ V, Max CL:
- 60ns @ 15V, 50pF
- Trigger Type:
- Positive Edge
- Current - Output High, Low:
- 3.4mA, 3.4mA
- Voltage - Supply:
- 3V ~ 15V
- Current - Quiescent (Iq):
- 4 µA
- Input Capacitance:
- 7.5 pF
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 14-SO
HEF4013BT-Q100J FAQ
1.How can I place an order for HEF4013BT-Q100J through Aetrix?
Please submit a Request for Quotation (RFQ) for HEF4013BT-Q100J on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for HEF4013BT-Q100J reliable?
The price and inventory of HEF4013BT-Q100J are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for HEF4013BT-Q100J is usually 5 days.
3.What payment methods are accepted for HEF4013BT-Q100J?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for HEF4013BT-Q100J transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for HEF4013BT-Q100J?
HEF4013BT-Q100J orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your HEF4013BT-Q100J order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for HEF4013BT-Q100J?
For technical support, including HEF4013BT-Q100J datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your HEF4013BT-Q100J requirements.
6.How does Aetrix verify that HEF4013BT-Q100J is sourced from the original manufacturer or authorized distributors?
All HEF4013BT-Q100J products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that HEF4013BT-Q100J meets industry standards.
7.What is the process for return or replacement of HEF4013BT-Q100J?
All HEF4013BT-Q100J units undergo pre-shipment inspection (PSI). If there is an issue with HEF4013BT-Q100J, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The HEF4013BT-Q100J part is unused and in its original packaging.
Return procedure for HEF4013BT-Q100J:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
HEF4013BT-Q100J Tags
-
SN74HC74DR
Texas Instruments
-
SN74HC74PWR
Texas Instruments
-
74LVC1G74GT,115
Nexperia USA Inc.
-
SN74LVC2G74DCUR
Texas Instruments
-
CD4013BM96
Texas Instruments
-
SN74HCT273PWR
Texas Instruments
-
SN74LVC1G74DCUR
Texas Instruments
-
SN74HC574DWR
Texas Instruments
-
74LVC1G74DC,125
Nexperia USA Inc.
-
SN74HC273DWR
Texas Instruments
-
SN74HCT574DWR
Texas Instruments
-
SN74LVC1G74DCTR
Texas Instruments
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
