My Inquiry
My Account
Renesas HI1-0201HS-5
- Part No.:
- HI1-0201HS-5
- Manufacturer:
- Renesas
- Package:
- 16-CDIP (0.300", 7.62mm)
- Datasheet:
-
HI1-0201HS-5.pdf
- Description:
- IC SW SPST-NCX4 50OHM 16CERDIP
- Quantity:
- Payment:
- Shipping:
Inventory:2,222
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
HI1-0201HS-5 from Intersil is a high-speed quad SPST CMOS analog switch with 30ns turn-on time, 40ns turn-off time, and 30Ω typical ON resistance, operating across ±15V analog signal range and designed for precision high-frequency multiplexing in test instrumentation and data acquisition systems.
For engineers reviewing the HI1-0201HS-5 datasheet, HI1-0201HS-5 pinout, HI1-0201HS-5 application, or HI1-0201HS-5 equivalent, this device delivers TTL-compatible digital control, low 10pC charge injection, and 72dB OFF isolation - critical for sample-and-hold circuits, digital filters, and op-amp gain switching networks requiring minimal signal distortion and fast settling.
Technical Context
The HI1-0201HS-5 integrates four independent SPST switches using silicon-gate CMOS technology with Intersil's Dielectric Isolation process, enabling symmetrical analog current handling up to ±80mA and operation over 0°C to 75°C. Its logic input stage employs complementary vertical PNP/NPN bipolar transistors - not MOS - to achieve sub-50ns switching while maintaining TTL compatibility.
This architecture yields distinct trade-offs: faster switching versus higher digital input leakage (up to 500µA) compared to the standard HI-201. The device requires dual ±15V supplies for guaranteed performance; single-supply operation is unsupported, and parametric degradation begins below ±12V.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Switching Speed (tON) | 30ns typical - enables sampling at >10MHz without timing skew between channels. |
| Switching Speed (tOFF) | 40ns typical - ensures clean channel isolation during high-frequency multiplexing. |
| ON Resistance (rON) | 30Ω typical at ±15V - minimizes gain error and THD in precision amplifier switching networks. |
| Analog Signal Range | ±15V - supports full-rail operation with industrial-grade op-amps and DACs. |
| Charge Injection | 10pC - limits voltage glitch in sample-and-hold capacitors ≤1nF. |
| OFF Isolation | 72dB at 100kHz - suppresses crosstalk between adjacent switched signal paths. |
| Digital Input Compatibility | TTL-level (0.8V/2.4V thresholds) - interfaces directly with 5V microcontrollers and FPGAs without level shifters. |
Pinout & Package
HI1-0201HS-5 is housed in a 16-lead CERDIP package (PKG No. F16.3), hermetically sealed for high-reliability industrial and aerospace applications. Thermal resistance θJA is 80°C/W, supporting continuous operation at full rated load within its 0°C to 75°C ambient range.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 8, 9, 16 | Digital Control Inputs (A1–A4) | TTL-compatible logic inputs selecting individual SPST switches; low-leakage threshold design optimized for fast edge response. |
| 2, 5, 11, 14 | Analog Inputs (IN1–IN4) | Source terminals accepting ±15V analog signals; symmetric structure allows bidirectional current flow up to ±80mA. |
| 3, 6, 12, 15 | Analog Outputs (OUT1–OUT4) | Drain terminals delivering switched analog signals; matched capacitance (10pF OFF, 30pF ON) ensures consistent settling behavior. |
| 4 | Negative Supply (V−) | −15V reference for analog and logic circuitry; internal level shifter ties digital thresholds to V−. |
| 7 | Ground (GND) | Digital ground reference; isolated from analog return paths to minimize noise coupling. |
| 13 | Positive Supply (V+) | +15V supply powering analog switches and input buffers; regulates internal bias for stable rON and switching thresholds. |
| 10 | No Connect (NC) | Unused die pad - must remain unconnected to avoid parasitic coupling or latch-up risk. |
Key Features
| Feature | Design Value |
|---|---|
| Quad SPST topology with independent controls | Enables simultaneous or staggered switching of four discrete signal paths without shared timing constraints. |
| Symmetrical analog current capability | ±80mA rating supports bidirectional signal routing in integrator reset and transimpedance amplifier configurations. |
| Low 10pC charge injection | Reduces hold-mode error in 12-bit+ sample-and-hold systems using ≤1nF capacitors. |
| 72dB OFF isolation at 100kHz | Maintains signal integrity in dense multiplexer arrays where adjacent channel separation exceeds 40dB. |
| Dielectric Isolation fabrication | Eliminates latch-up risk and enables robust operation in high-noise industrial environments with ground potential differences. |
Applications
| High-Speed Data Acquisition | Digital Filter Switching |
|---|---|
|
Use Scenario: Multiplexing 16-channel sensor inputs into a single high-speed ADC at 1MSPS. IC Role / Device Role / Timing Role: Quad SPST switch routing analog front-end signals with <180ns total settling time per channel. Use Value: Enables deterministic channel-to-channel skew <50ns and maintains SNR >70dB across full bandwidth due to low rON and 72dB isolation. |
Use Scenario: Reconfiguring coefficient paths in a switched-capacitor FIR filter bank. IC Role / Device Role / Timing Role: Precision analog path selector controlling capacitor array connections under FPGA control. Use Value: 10pC charge injection prevents DC offset accumulation across filter taps; ±15V range accommodates rail-to-rail integrator voltages. |
| Op-Amp Gain Switching | Integrator Reset Circuits |
|
Use Scenario: Dynamically adjusting closed-loop gain of a precision instrumentation amplifier via feedback resistor selection. IC Role / Device Role / Timing Role: Low-rON analog switch inserting discrete gain-setting resistors into feedback path. Use Value: 30Ω rON contributes <0.02% gain error in 10kΩ feedback networks; TTL compatibility allows direct FPGA GPIO control. |
Use Scenario: Periodic discharge of integration capacitor in a precision analog computer or PID controller. IC Role / Device Role / Timing Role: Fast-acting reset switch shorting integrator capacitor to virtual ground. Use Value: 30ns tON ensures sub-100ns reset window; ±80mA current rating handles peak discharge currents without saturation. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar quad SPST analog switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| HI1-0201-5 | Slower switching (tON/tOFF = 100ns/120ns), higher rON (100Ω), no dielectric isolation. | Acceptable for <100kHz multiplexing but unsuitable for >1MHz sample-and-hold or digital filters. | Select HI1-0201-5 only when speed and isolation requirements are relaxed and cost is primary. |
| ADG1414BRUZ | Single-supply capable (±15V or +12V), lower rON (1.8Ω), but higher charge injection (25pC) and no CERDIP option. | Better for portable systems with single-rail supplies; less suitable for high-precision hold circuits due to higher glitch energy. | Choose ADG1414BRUZ when supply flexibility and ultra-low rON outweigh need for hermetic packaging and minimal charge injection. |
Compared with HI1-0201-5, the HI1-0201HS-5 delivers 3× faster switching and superior isolation for high-frequency signal routing; versus ADG1414BRUZ, it trades lower rON for guaranteed low-charge-injection performance in CERDIP-reliability-critical designs.
Availability
HI1-0201HS-5 is available at Aetrix Electronics and suitable for high-reliability test instrumentation, aerospace data loggers, and industrial process controllers requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for HI1-0201HS-5 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Intersil Corporation, now part of Renesas Electronics, designs high-performance analog and mixed-signal ICs with emphasis on precision, speed, and ruggedness for industrial, aerospace, and defense applications.
The HI-201HS family was developed specifically for high-speed analog signal routing where sub-50ns switching, low charge injection, and dielectric-isolation reliability are mandatory - targeting automated test equipment and real-time control systems.
FAQ
What is the maximum analog signal voltage range supported by HI1-0201HS-5?
The HI1-0201HS-5 supports a full ±15V analog signal range when operated with ±15V power supplies. This allows rail-to-rail signal handling compatible with industrial op-amps and DACs. Operation outside this range - including single-supply configurations - is not supported and will degrade or disable switching functionality.
Does HI1-0201HS-5 require external level shifting for TTL logic inputs?
No, HI1-0201HS-5 does not require external level shifting for TTL logic inputs. Its digital inputs (pins 1, 8, 9, 16) are internally referenced and fully TTL-compatible, accepting 0V–5V logic levels with guaranteed thresholds of 0.8V (low) and 2.4V (high). CMOS logic (0V–15V) may be used but degrades switching speed.
Can HI1-0201HS-5 be used in sample-and-hold circuits?
Yes, HI1-0201HS-5 is explicitly suited for sample-and-hold circuits due to its low 10pC charge injection, 30ns tON, and 180ns output settling time to 0.1%. When paired with ≤1nF hold capacitors and ±15V supplies, it minimizes droop and voltage glitch - key for 12-bit+ precision acquisition systems.
What is the thermal resistance and maximum junction temperature for HI1-0201HS-5?
The HI1-0201HS-5 in its 16-lead CERDIP package has a typical junction-to-ambient thermal resistance (θJA) of 80°C/W and a maximum junction temperature of 175°C. This enables reliable operation at full load in ambient temperatures up to 75°C, provided PCB layout provides adequate copper area for heat dissipation.
Is HI1-0201HS-5 pin-compatible with other variants in the HI-201HS family?
Yes, HI1-0201HS-5 is pin-compatible with all HI-201HS variants (e.g., HI1-0201HS-2, HI3-0201HS-5, HI9P0201HS-5) sharing the same 16-lead footprint - CERDIP, PDIP, and SOIC packages use identical pinouts. Functional behavior and timing specs are identical; only temperature range and package type differ.
HI1-0201HS-5 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Packaging:
- Tube
- Product Status:
- Obsolete
- Switch Circuit:
- SPST - NC
- Multiplexer/Demultiplexer Circuit:
- 1:1
- Number of Circuits:
- 4
- On-State Resistance (Max):
- 50Ohm
- Channel-to-Channel Matching (ΔRon):
- 1.5Ohm
- Voltage - Supply, Single (V+):
- -
- Voltage - Supply, Dual (V±):
- ±15V
- Switch Time (Ton, Toff) (Max):
- 50ns, 50ns
- -3db Bandwidth:
- -
- Charge Injection:
- 10pC
- Channel Capacitance (CS(off), CD(off)):
- 10pF, 10pF
- Current - Leakage (IS(off)) (Max):
- 10nA
- Crosstalk:
- -86dB @ 100kHz
- Operating Temperature:
- 0°C ~ 75°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 16-CERDIP
HI1-0201HS-5 FAQ
1.How can I place an order for HI1-0201HS-5 through Aetrix?
Please submit a Request for Quotation (RFQ) for HI1-0201HS-5 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for HI1-0201HS-5 reliable?
The price and inventory of HI1-0201HS-5 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for HI1-0201HS-5 is usually 5 days.
3.What payment methods are accepted for HI1-0201HS-5?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for HI1-0201HS-5 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for HI1-0201HS-5?
HI1-0201HS-5 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your HI1-0201HS-5 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for HI1-0201HS-5?
For technical support, including HI1-0201HS-5 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your HI1-0201HS-5 requirements.
6.How does Aetrix verify that HI1-0201HS-5 is sourced from the original manufacturer or authorized distributors?
All HI1-0201HS-5 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that HI1-0201HS-5 meets industry standards.
7.What is the process for return or replacement of HI1-0201HS-5?
All HI1-0201HS-5 units undergo pre-shipment inspection (PSI). If there is an issue with HI1-0201HS-5, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The HI1-0201HS-5 part is unused and in its original packaging.
Return procedure for HI1-0201HS-5:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
HI1-0201HS-5 Tags
-
SN74LVC1G3157DBVR
Texas Instruments
-
SN74LVC1G66DBVR
Texas Instruments
-
SN74LVC1G66DCKR
Texas Instruments
-
SN74LVC1G3157DSFR
Texas Instruments
-
1P1G3157QDCKRQ1
Texas Instruments
-
SN74LVC2G66DCUR
Texas Instruments
-
SN74LV4052APWR
Texas Instruments
-
74HC4051D,653
Nexperia USA Inc.
-
SN74LV4051APWR
Texas Instruments
-
CD74HC4052PWR
Texas Instruments
-
CD74HC4051PWR
Texas Instruments
-
TS5A3166DBVR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
